A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

Mint Poinsettia card for the Stamp ‘n Hop Blog Hop

Hello and welcome to the Stamp ‘n Hop Blog Hop where our theme is ‘anything goes’ and I have chosen to share a mint poinsettia card made recently using scraps of the Boughs of Holly designer Series Paper (dsp) left over from another project.

Colours used in this project are:

 

To recreate the shaded poinsettia Christmas card, you will need:

Mint Macaron card base – 8¼” by 5⅞” scored and folded at 4⅛”
Mint Macaron card – 5½” by 3¾”
Boughs of Holly dsp – 3½” by 3½”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾”
Scrap Boughs of Holly dsp
Basic White strip ¼” wide

 

I die cut a large scalloped circle from the gorgeous Boughs of Holly dsp, placed it onto the Mint Macaron card front to get an idea for position then I stamped around it with a tree from the Trees For Sale stamp set and Mint Macaron ink.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

A slightly smaller circle was die cut from the square of Basic White card.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

I fussy cut one of the pretty poinsettias from the Boughs of Holly dsp and added it to the Basic White circle with liquid glue. The circles were then adhered together with Multipurpose Liquid Adhesive and added to the card front on Dimensionals.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

The sentiment from the Penguin Place stamp set was stamped in Cherry Cobbler ink onto the ¼” strip of Basic White card and the words cut apart and added with liquid glue to the circle.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

The whole piece was then added to the card front with the same liquid glue.

A trio of Adhesive Backed Sequins completed the card.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

Please hop over to see what my stamping friends have been working on recently.

 



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

Simple Tree for the Stamp ‘n Hop Blog Hop

Hello and welcome to the Stamp ‘n Hop Blog Hop where we are sharing simple projects featuring stamps, ink and paper with the possible addition of a punch and ribbon. I have pared my project right back and made a simple tree themed card using the Trees for Sale stamp set.

The colours used in this project are:

 

To recreate the simple tree card, you will need:

Balmy Blue card base – 8¼” by 5⅞” scored and folded at 4⅛”
Starry Sky card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Basic White card – 5½” by 3¾” for the inside

 

Using the dotty image from the Trees For Sale stamp set, I stamped all around the Balmy Blue card front in Balmy Blue ink.

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

www.crafty-rootes.co.uk – A simple tree Christmas card made using the Trees For Sale stamp set for the Stamp ‘n Hop #simplestamping Blog Hop

The sentiment from the Trees For Sale stamp set was stamped at the bottom of the smaller panel of Basic White card in Starry Sky ink.

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

www.crafty-rootes.co.uk – A simple tree Christmas card made using the Trees For Sale stamp set for the Stamp ‘n Hop #simplestamping Blog Hop

I inked up the large rectangle image from the Watercolor Shapes stamp set with Balmy Blue ink and stamped it onto the smaller Basic White panel.

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

www.crafty-rootes.co.uk – A simple tree Christmas card made using the Trees For Sale stamp set for the Stamp ‘n Hop #simplestamping Blog Hop

The detailed tree was then added in Starry Sky ink. The stamped panel was glued to the Starry Sky layer with Multipurpose Liquid Adhesive. I then added it to the card front on Dimensionals.

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

www.crafty-rootes.co.uk – A simple tree Christmas card made using the Trees For Sale stamp set for the Stamp ‘n Hop #simplestamping Blog Hop

A Basic Rhinestone completed the card.

 

The Trees For Sale stamp set by Stampin' Up! used to make a simple tree Christmas card for the Stamp 'n Hop #simplestamping Blog Hop

www.crafty-rootes.co.uk – A simple tree Christmas card made using the Trees For Sale stamp set for the Stamp ‘n Hop #simplestamping Blog Hop

Love the simplicity of this card. I hope you like it.

Please hop on to see what my friends have to share with us today. Next up is the lovely Vickie Littlewood

 

Karen Egan

Mo Rootes

Victoria Littlewood

Annette Elias

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

Trio if Christmas Trees card

Here is a pretty trio of Christmas Trees card made using the Trees for Sale stamp set and the lovely Fern 3D Embossing Folder.

Colours used in this project are:

 

To recreate the trio of Christmas trees card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” scored and folded at 4⅛”
Parakeet Party card – 5⅝” by 3⅞
Basic White card – 5½” by 3¾” x 2 – one for the inside
Shaded Spruce card – 3⅛” by 3⅛”
Parakeet Party card – 3” by 3”
Basic White card – 3⅛” by 3⅛”
Scrap Basic White card

 

Using the Fern 3D Embossing Folder, I embossed one of the larger Basic White panels and adhered it to the larger Parakeet Party layer with Multipurpose Liquid Adhesive. I wrapped a piece of Parakeet Party Metallic Woven Ribbon around the panel, securing it on the reverse with Sellotape. The panel was glued to the Shaded Spruce card front with liquid glue.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I stamped the solid image for the largest tree in Parakeet Party ink onto the Square of Basic White card. I repeated it twice more. I added the detailed image on top using Shaded Spruce ink.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

The stamped panel was then die cut using the Stylish Shapes Dies, I love the stitched edge this gives.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I adhered the die cut square to the Parakeet Party square then to the Shaded Spruce square and mounted it onto the card front straddling the ribbon using Dimensionals.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

The sentiment from the Vintage Christmas stamp set was stamped in Shaded Spruce ink onto the scrap Basic White card. It was die cut using the Layering Circle Dies. It was added to the card front on a Dimensional.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I used a Shaded Spruce Blends Pen to colour in a trio of Basic Rhinestones and added them to the card base. I also added a bow made using the same ribbon on a Mini Glue Dot.

Pretty card, I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

Shaded Poinsettia card for the Ink. Stamp. Share Blog Hop

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on.  I have made a shaded poinsettia card using scraps of the gorgeous Boughs of Holly designer Series Paper (dsp) which were left over from another project.

Colours used in this project are:

 

To recreate the shaded poinsettia Christmas card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” scored and folded at 4⅛”
Boughs of Holly dsp – 3½” by 3½”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾”
Scrap Boughs of Holly dsp

 

I die cut a large scalloped circle from the gorgeous Boughs of Holly dsp, placed it onto the Shaded Spruce card front to get an idea for position and stamped around it with a tree from the Trees For Sale stamp set and Shaded Spruce ink.

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

www.crafty-rootes.co.uk – The Boughs of Holly designer Series Paper used to make a classy Christmas card for the Ink. Stamp. Share Blog Hop

A loop od Gold Shimmer Ribbon was then secured to the card front with Tear ‘n Tape.

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

www.crafty-rootes.co.uk – The Boughs of Holly designer Series Paper used to make a classy Christmas card for the Ink. Stamp. Share Blog Hop

A slightly smaller circle was die cut from the square of Basic White card and the sentiment from the Penguin Place stamp set was stamped towards the bottom in Real Red ink. The circles were then adhered together with Multipurpose Liquid Adhesive.

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

www.crafty-rootes.co.uk – The Boughs of Holly designer Series Paper used to make a classy Christmas card for the Ink. Stamp. Share Blog Hop

I fussy cut one of the pretty poinsettias from the Boughs of Holly dsp and added it to the Basic White circle on Dimensionals. The whole piece was then added to the card front with the same liquid glue.

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

www.crafty-rootes.co.uk – The Boughs of Holly designer Series Paper used to make a classy Christmas card for the Ink. Stamp. Share Blog Hop

A trio of Adhesive Backed Sequins completed the card.

 

A pretty poinsettia themed Christmas card made using the Boughs of Holly dsp by Stampin' Up! for the In. Stamp. Share Blog Hop

www.crafty-rootes.co.uk – The Boughs of Holly designer Series Paper used to make a classy Christmas card for the Ink. Stamp. Share Blog Hop

Please hop over to see what my stamping friends have been working on recently.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: