A pretty ladybird in yellow flowers themed card made using the Hello Ladybug stamp set and Ladybug Builder Punch by Stampin' Up!

Ladybird in Yellow Flowers

The pretty Hello Ladybug stamp set was out on my desk today and I used it to make a pretty Ladybird themed card.

Colours used in my card today are:

 

To recreate the ladybird card, you will need:

Daffodil Delight card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅝” by 3⅞”
Basic Black card – 2½” by 2⅜”
Basic White card – 2⅛” by 2¼”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White, Daffodil Delight, Sweet Sorbet & Basic Black

 

I stamped the trio of flowers in Daffodil Delight ink all over the 5⅝” by 3⅞” panel of Basic White card and added the trio of dots in Memento Tuxedo Black ink.

 

A pretty ladybird in yellow flowers themed card made using the Hello Ladybus stamp set and Ladybug Builder Punch by Stampin' Up!

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used to make a pretty ladybird in yellow flowers themed card

The stamped panel was then glued to the Daffodil Delight card base using Multipurpose Liquid Adhesive.

 

A pretty ladybird in yellow flowers themed card made using the Hello Ladybug stamp set and Ladybug Builder Punch by Stampin' Up!

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used to make a pretty ladybird in yellow flowers themed card

The small panel of Basic White was glued to the Basic Black layer and then to the card front using the same liquid glue.

Using the Ladybug Builder Punch, I punched a ladybird body from scrap Basic Black card. The wings were stamped in Sweet Sorbet ink onto scrap Basic White card and punched out. I shaped the wings using a Bone Folder and glued them to the black body with a little liquid glue. I added the bug to the white square on Dimensionals.

 

A pretty ladybird in yellow flowers themed card made using the Hello Ladybug stamp set and Ladybug Builder Punch by Stampin' Up!

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used to make a pretty ladybird in yellow flowers themed card

A flower, punched using the Medium Daisy Punch from scrap Sweet Sorbet card was added to the card front and a Matte Black Dot added to the centre.

 

A pretty ladybird in yellow flowers themed card made using the Hello Ladybug stamp set and Ladybug Builder Punch by Stampin' Up!

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used to make a pretty ladybird in yellow flowers themed card

The sentiment was stamped in Memento Tuxedo Black ink onto scrap Daffodil Delight card, trimmed it out and added it to the card front.

 

A pretty ladybird in yellow flowers themed card made using the Hello Ladybug stamp set and Ladybug Builder Punch by Stampin' Up!

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used to make a pretty ladybird in yellow flowers themed card

So bright and cheerful, I hope you like it.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty and bright ladybird birthday card made using the pretty Hello Ladybug stamp set by Stampin' Up!

Ladybird Birthday Card

I am sharing a sweet ladybird birthday card made using the Hello Ladybug stamps set.

 

Colours used in this card are:

 

To recreate the ladybird card, you will need:

Sweet Sorbet card base – 8¼” by 5⅞” – scored at 4⅛”
Parakeet Party card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Basic Black card – 3¼” by 2¼”
Basic White card – 2¼” by 2⅛”
Basic White card – 5½” by 3¾” – for the inside

 

Using Sweet Sorbet ink, I randomly stamped the daisy flower all over the 5” by 3¼” panel of Basic White card. I added the flower centres using Memento Tuxedo Black ink.

 

The trio of tiny dots were added, randomly, over the same panel using Parakeet Party ink. The decorated panel was then glued to the Parakeet Party layer which was then adhered to the Sweet Sorbet card base. I used Multipurpose Liquid Adhesive on both occasions.

 

A pretty and bright ladybird birthday card made using the pretty Hello Ladybug stamp set by Stampin' Up!

www.crafty-rootes.com – The pretty Hello Ladybug stamp sets used to make a pretty and bright ladybird birthday card

The sentiment, from the Go To Greetings stamp set was stamped in Memento Tuxedo Black along the bottom of the small basic white panel.

 

A pretty and bright ladybird birthday card made using the pretty Hello Ladybug stamp set by Stampin' Up!

www.crafty-rootes.com – The pretty Hello Ladybug stamp sets used to make a pretty and bright ladybird birthday card

The cute little ladybird was stamped in Memento Tuxedo Black ink above the sentiment and the wings added with Sweet Sorbet ink.

 

A pretty and bright ladybird birthday card made using the pretty Hello Ladybug stamp set by Stampin' Up!

www.crafty-rootes.com – The pretty Hello Ladybug stamp sets used to make a pretty and bright ladybird birthday card

Using the Penned Dies, I die-cut a scalloped edge along the bottom of the 3¼” by 2¼” panel of Basic Black card. I glued the sentiment piece above the scalloped edge and trimmed the excess length of card away. A length of Black Baker’s Twine was wrapped around the panel, secured on the back with Sellotape.

 

A pretty and bright ladybird birthday card made using the pretty Hello Ladybug stamp set by Stampin' Up!

www.crafty-rootes.com – The pretty Hello Ladybug stamp sets used to make a pretty and bright ladybird birthday card

The whole piece was added to the card front on Dimensionals and a Black Baker’s Twine bow completed the card.

So sweet, I hope you like it.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

Bumblebee card using retiring In Colors

Today I am sharing a bumblebee card made using the retiring 2020-2022 In Colors and the lovely Hello Ladybug stamp set :

Colors used in this project are:

To recreate the bumblebee card, you will need:

Bumblebee card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic Black card – 5⅛” by 3½” – rounded upper left corner
Basic White card – 5” by 3⅜” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic Black, Bumblebee & Vellum

I stamped the large leaves in Just Jade ink onto the smaller panel of Basic White card.

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

www.crafty-rootes.com – The Hello Ladybug stamp set used to make a sweet Bumblebe card for the Stamping with Friends Blog Hop

The flowers were added in Magenta Madness ink. The stamped panel was added to the Basic Black panel using Multipurpose Liquid Adhesive. The panel was added to the card front using the same glue.

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

www.crafty-rootes.com – The Hello Ladybug stamp set used to make a sweet Bumblebe card for the Stamping with Friends Blog Hop

 

Using the Ladybug Builder Punch, I punched out the Bumblebee from scrap Basic Black card. I cut ⅛” strips of Bumblebee card and glued them to the punched black shape. Using the same punch, I punched out the wings from scrap Vellum. And adhered them to the bee with Mini Glue Dots.

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

www.crafty-rootes.com – The Hello Ladybug stamp set used to make a sweet Bumblebe card for the Stamping with Friends Blog Hop

 

The bumblebee was added to the card front on Dimensionals.

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

www.crafty-rootes.com – The Hello Ladybug stamp set used to make a sweet Bumblebe card for the Stamping with Friends Blog Hop

The sentiment was stamped in Just Jade ink and a trio of Holiday Rhinestones completed the card.

 

A pretty bumblebee card made using retiring colours for the Stamping with Friends Blog Hop

www.crafty-rootes.com – The Hello Ladybug stamp set used to make a sweet Bumblebe card for the Stamping with Friends Blog Hop

I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

Missing Ladybug for the Stamper’s Showcase Blog Hop

 

Hello and welcome to the Stampers Showcase Blog Hop where we are CASEing a project from the catalogue. CASeing means either Copy and Share Everything, which basically means making the card as it is shown or Copy and Selectively Edit which means using the project as a jumping off point and adding your own spin to it. I have chosen the sweet, Missing Ladybug card from page 20 of the January – June Mini Catalogue and have made it my own by changing the colour combo.

 

 

Colours used in this project are:

 

To recreate the missing ladybug card, you will need:

Fresh Freesia card base – 8 ¼” by 5⅝” scored at 4⅛”
Gorgeous Grape card – 5⅝” by ½”
Basic White card – 5⅝” by 3”
Pool Party card – 3¼” by 1¼”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

Using the trio of flowers, I stamped up the front of the smaller Basic White panel with Gorgeous Grape ink.

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used in a CASE the card challenge for the Stamper’s Showcase Blog Hop

The strip of Gorgeous Grape card was added to the left-hand side of the stamped panel using Multipurpose Liquid Adhesive. The whole piece was then mounted onto the Fresh Freesia card front on Dimensionals.

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used in a CASE the card challenge for the Stamper’s Showcase Blog Hop

Using Scissors, I flagged the end of the Pool Party Strip and added it with liquid glue to the card front.

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used in a CASE the card challenge for the Stamper’s Showcase Blog Hop

I stamped the large leaf in Garden Green ink onto scrap Basic White card and fussy cut it out using Scissors. The leaf was added onto the banner with liquid glue.

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used in a CASE the card challenge for the Stamper’s Showcase Blog Hop

The sentiment was stamped onto scrap Basic White card and trimmed out using my Paper Trimmer and added to the card front.

 

For the Stamper's Showcase Blog Hop we are CASEing the catalogue and I have chosen to use the Hello Ladybug card

www.crafty-rootes.co.uk – The Hello Ladybug stamp set used in a CASE the card challenge for the Stamper’s Showcase Blog Hop

I added a trio of Pastel Pearls and a White Baker’s Twine bow to complete the card.

I hope you like it.

Please hop on to see what my fellow demos have to share with us today.


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: