A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

Red Stippled Roses card

Here is a pretty thank you card featuring a spray of red, stippled roses made using the Stippled Roses stamp set and co-ordinating Dies.

Colours in this card are:

 

To recreate the red stippled roses card, you will need:

Poppy Parade card base – 8¼” by 5⅞” – scored at 4⅛”
Mossy Meadow card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Basic Black card – 2⅛” by 2⅛”
Basic White card – 5½” by 3¾”
Scrap Basic White and Basic Black card

 

Using the Fern 3D Embossing Folder, I embossed the 5” by 3¼” piece of Basic White card and adhered it to the Mossy Meadow panel. A couple of strands of Black Baker’s Twine were wrapped around the panel and secured on the back with Sellotape.

 

A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

www.crafty-rootes.com – The Stippled Roses stamp set and co-ordinating Dies used to make a beautiful thank you card

The large image of roses was stamped in Memento Tuxedo Black ink onto scrap Basic White card and coloured the image using Poppy Parade and Mossy Meadow Blends Pens.

 

A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

www.crafty-rootes.com – The Stippled Roses stamp set and co-ordinating Dies used to make a beautiful thank you card

The coloured image was then added to the embossed panel using Mini Glue Dots. Before adding the panel to the Poppy Parade card front, I decided it needed something else. After a bit of thought I took a square of Basic Black card, cut it from corner to corner and added a triangle of black to the upper left and lower right corner of the decorated panel. The whole piece was mounted onto the card front on Black Dimensionals.

 

A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

www.crafty-rootes.com – The Stippled Roses stamp set and co-ordinating Dies used to make a beautiful thank you card

The sentiment, from the Simply Said stamp set was stamped in Versamark ink onto a scrap of Basic Black card. I covered it with White Embossing Powder and heat set it. I trimmed it down and added it to the card front.

 

A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

www.crafty-rootes.com – The Stippled Roses stamp set and co-ordinating Dies used to make a beautiful thank you card

A twine bow and a scattering of Iridescent Adhesive Backed Dots finished the card.

 

A beautiful thank you card made using the Stippled Roses stamp set and co-ordinating Dies from Stampin' Up!

www.crafty-rootes.com – The Stippled Roses stamp set and co-ordinating Dies used to make a beautiful thank you card

I hope you like it.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

Beautiful Flowers card

Here is a pretty, floral sending love card, made using the lovely Flowers of Beauty stamp set and dies.

Colours in this card are:

 

To recreate the beautiful flowers card, you will need:

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛”
Garden Green card – 5½” by 3¾”
Basic White card – 5⅜” by 3⅝”
Basic White card – 4” by 4”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

 

Using the Fern 3D Embossing Folder, I embossed the 5⅜” by 3⅝” piece of Basic White card. The embossed panel was then glued to the Garden Green layer and then to the Berry Burst card front.

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set to make a pretty floral card

I used the Everyday Details dies to die cut a large circle and stamped the sentiment, from the Heartfelt Hexagon stamp set in the centre of the die cut circle in Pebbled Path ink.

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set to make a pretty floral card

The outline rose image was stamped in Calypso Coral ink and the centre added in 2nd generation Calypso Coral. The smaller flower was stamped in Berry Burst ink with the colour added in 2nd generation Berry Burst ink.

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set to make a pretty floral card

The leaves were stamped with Garden Green ink, the outline in full strength and the inside with 2nd generation. All the images were die cut using the Flowers of Beauty Dies. The flowers and leaves were then arranged around the die cut circle.

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set to make a pretty floral card

A Calypso Coral Baker’s Twine bow and a trio of Tinsel Gems – 4 pack finished the card.

 

A pretty floral card made using the Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set from Stampin' Up!

www.crafty-rootes.com – The Flowers of Beauty stamp set used with the Heartfelt Hexagon stamp set to make a pretty floral card

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

Forever Forest Christmas cards – Christmas Stampathon

May be an image of christmas tree and text

Today I am sharing cards I made for the July Christmas Stampathon. The theme this month is ‘red, green & cream’. I have made my cards using the Forever Forest stamp set and the Nested Essential Dies.

Colours used in these cards are:

 

To recreate the forever forest card you will need:

Shaded Spruce card base – 8¼” by 5⅞” – scored at 4⅛”
Cherry Cobbler card – 5⅝” by 3⅞”
Very Vanilla card – 5½” by 3¾” x 2 – one for the inside
Very Vanilla card – 4½” by 2¾”

 

Using the Fern 3D Embossing Folder, I embossed one of the pieces of Very Vanilla card. A piece of retired Cherry Cobbler Twine was wrapped around the panel, secured on the back with Sellotape.

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

www.crafty-rootes.com -The Forever Forest Stamp set and Nested Essentials Dies used to make cards for the July 2024 Christmas Stampathon

I die cut a label from from the center of the Cherry Cobbler panel using the Nested Essentials Dies. The embossed panel was then glued to the Cherry Cobbler layer.

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

www.crafty-rootes.com -The Forever Forest Stamp set and Nested Essentials Dies used to make cards for the July 2024 Christmas Stampathon

Using the same Nested Essentials Dies, I die cut a slightly smaller label from the 4½” by 2¾” piece of Very Vanilla card.

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

www.crafty-rootes.com -The Forever Forest Stamp set and Nested Essentials Dies used to make cards for the July 2024 Christmas Stampathon

Using Shaded Spruce ink, I stamped the row of trees onto the label. I added ‘ground’ using an image from the Garden Meadow stamp set and Basic Beige ink. The stamped label was glued to the Cherry Cobbler label. This was added to the card front on Dimensionals.

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

www.crafty-rootes.com -The Forever Forest Stamp set and Nested Essentials Dies used to make cards for the July 2024 Christmas Stampathon

 

A twine bow and a trio of retired Cherry Cobbler Dots finished the card.

 

Cards made for the July 2024 Christmas Stampathon using the Forever Forest Stamp set and Nested Essentials Dies from Stampin' Up!

www.crafty-rootes.com -The Forever Forest Stamp set and Nested Essentials Dies used to make cards for the July 2024 Christmas Stampathon

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

Fern Card – Ink. Stamp. Share Blog Hop

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on. I am sharing a card using the Fern 3D Embossing Folder which is carrying over into the new annual catalogue.

Colours in this card are:

 

To recreate the fern card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Mossy Meadow card – 5⅜” by 3⅝”
Stargazing dsp – 5¼” by 3½”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White

 

Using the Fern 3D Embossing Folder I embossed the piece if Stargazing dsp.

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

The back edge of the Mossy Meadow ink pad to was then dragged, lightly, across the top of the embossed panel adding colour to the top of the fern leaves. I absolutely love the effect this gives.

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

The embossed panel was then glued to the Mossy Meadow layer and a length of Parakeet Party Metallic Woven Ribbon was wrapped around before the whole piece was added to the Thick Basic White card front.

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

I die cut 2 stitched squares from scrap Basic White card using the Stylish Shapes Dies. The larger square was tucked under the ribbon and adhered in place.

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

The sentiment, from the Simply Said stamp set was stamped onto the smaller stitched square using Mossy Meadow ink. The square was then mounted onto the card front on Dimensionals.

 

The Fern 3D Embossing Folder and Stargazing dspfrom Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

A scattering of Adhesive-backed Shiny Sequins and a bow finished the card.

 

The Fern 3D Embossing Folder and Stargazing dsp from Stampin' Up! used with Meadow ink to make a lovely card - Ink. Stamp. Share Blog Hop

www.crafty-rootes.com – A gorgeous card made using the Fern 3D Embossing Folder and Stargazing dsp and some Mossy Meadow ink – Ink. Stamp. Share Blog Hop

Please hop on to share the inspiration provided by my crafty friends.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

Country Wreaths card for the Ink. Stamp. Share Blog Hop

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are working with a sketch challenge. I have used the Cottage Wreaths stamp set to create my card.

 

Colours used in this project are:

 

To recreate the country wreaths card, you will need:

Soft Succulent card base – 8¼” by 5⅞” scored and folded at 4⅛”
Sweet Sorbet card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Basic White card – 3½” by 3½”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White, Sweet Sorbet, Soft Succulent and 2022 – 2024 In Color dsp.

 

I ran the smaller panel of Basic White card through the Cut & Emboss Machine with the Fern 3D Embossing Folder. This was then glued to the Sweet Sorbet panel using Multipurpose Liquid Adhesive. I used the same glue to adhere the piece to the Soft Succulent card base.

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Cottage Wreaths stamp set and Country Wreaths Dies used to make a card for the Ink. Stamp. Share Blog Hop sketch challenge

I flagged the ends of 2 scrap strips of 2022 – 2024 In Color dsp and added them to the card front with liquid glue. I had flagged one end with Scissors.

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Cottage Wreaths stamp set and Country Wreaths Dies used to make a card for the Ink. Stamp. Share Blog Hop sketch challenge

A stitched circle was die cut from the square of Basic White card using the Stylish Shapes Dies. I used the double leafy sprig to stamp around the edge of the circle with Soft Succulent ink. I used liquid glue to add the circle to the card front.

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Cottage Wreaths stamp set and Country Wreaths Dies used to make a card for the Ink. Stamp. Share Blog Hop sketch challenge

The leafy wreath was stamped in Evening Evergreen ink onto scrap Basic White card, added berries with Sweet Sorbet ink and used the Country Wreath Dies to cut out the wreath, this was added to the die cut circle on Dimensionals. A bow, die cut from the scrap Sweet Sorbet card was added to the wreath.

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Cottage Wreaths stamp set and Country Wreaths Dies used to make a card for the Ink. Stamp. Share Blog Hop sketch challenge

The sentiment was stamped in Evening Evergreen ink onto a scrap of Soft Succulent card, trimmed it down and added it to the card front.

 

A card made for the Ink. Stamp. Share Blog Hop sketch challenge using the Cottage Wreaths stamp set and Country Wreaths Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Cottage Wreaths stamp set and Country Wreaths Dies used to make a card for the Ink. Stamp. Share Blog Hop sketch challenge

A trio of Festive Pearls completed the card.

Please continue to hop along to share the inspiration provided by my stamping friends.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

Metallic Holly Leaves card

Hello and welcome to the Metallics Blog op where we are sharing, surprize, surprize – projects made using Metallics. I have made a metallic holly leave card to share today.

Colours used in this project are:

 

To recreate the metallic holly leaves card, you will need:

Soft Sea Foam card base – 8¼” by 5⅞” scored and folded at 4⅛”
Vellum – 5½” by 3¾”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White, Silver Foil, Gold Foil & Copper Foil

 

Using the Fern 3D Embossing Folder, I embossed the piece of Vellum and adhered it to the Soft Sea Foam card base using Seal +, one strip in the centre of the card base where it would be hidden.

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

www.crafty-rootes.co.uk – A pretty card made using the Holly Berry Dies and Leaves of Holly stamp set for the Metallics Blog Hop

I die cut the label from the scrap Basic White card.

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

www.crafty-rootes.co.uk – A pretty card made using the Holly Berry Dies and Leaves of Holly stamp set for the Metallics Blog Hop

The sentiment was stamped in Versamark ink onto the die cut label, covered with Copper Embossing Powder and heat set using my Heat Tool.

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

www.crafty-rootes.co.uk – A pretty card made using the Holly Berry Dies and Leaves of Holly stamp set for the Metallics Blog Hop

From Silver Foil card, I die cut the backing piece to put behind the holly leaves on the label. The label was then added to the card front on Dimensionals.

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

www.crafty-rootes.co.uk – A pretty card made using the Holly Berry Dies and Leaves of Holly stamp set for the Metallics Blog Hop

Using the Holly Berry Dies again, I die cut a large detailed holly leaf from Copper Foil and the smaller holly leaf form the Gold Foil and tucked them under the label, using Mini Glue Dots to hold them in place.

 

A holly leaves card made using the Holly Berry Dies and Leaves of Holly stamp set by Stampin' Up! for the Metallics Blog Hop

www.crafty-rootes.co.uk – A pretty card made using the Holly Berry Dies and Leaves of Holly stamp set for the Metallics Blog Hop

I added a scattering of Brushed Metallic Dots and Festive Pearls to complete the card.

Please hop on to share the metallic inspiration provided by my crafty friends.

 


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x

Supplies used:

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

Trio if Christmas Trees card

Here is a pretty trio of Christmas Trees card made using the Trees for Sale stamp set and the lovely Fern 3D Embossing Folder.

Colours used in this project are:

 

To recreate the trio of Christmas trees card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” scored and folded at 4⅛”
Parakeet Party card – 5⅝” by 3⅞
Basic White card – 5½” by 3¾” x 2 – one for the inside
Shaded Spruce card – 3⅛” by 3⅛”
Parakeet Party card – 3” by 3”
Basic White card – 3⅛” by 3⅛”
Scrap Basic White card

 

Using the Fern 3D Embossing Folder, I embossed one of the larger Basic White panels and adhered it to the larger Parakeet Party layer with Multipurpose Liquid Adhesive. I wrapped a piece of Parakeet Party Metallic Woven Ribbon around the panel, securing it on the reverse with Sellotape. The panel was glued to the Shaded Spruce card front with liquid glue.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I stamped the solid image for the largest tree in Parakeet Party ink onto the Square of Basic White card. I repeated it twice more. I added the detailed image on top using Shaded Spruce ink.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

The stamped panel was then die cut using the Stylish Shapes Dies, I love the stitched edge this gives.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I adhered the die cut square to the Parakeet Party square then to the Shaded Spruce square and mounted it onto the card front straddling the ribbon using Dimensionals.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

The sentiment from the Vintage Christmas stamp set was stamped in Shaded Spruce ink onto the scrap Basic White card. It was die cut using the Layering Circle Dies. It was added to the card front on a Dimensional.

 

The Trees For Sale stamp set and Fern 3D Embossing Folder by Stampin' Up! used to make a trio of Christmas trees card

www.crafty-rootes.co.uk – A trio of Christmas trees made using the Trees For Sale stamp set and Fern 3D Embossing Folder from Stampin’ Up!

I used a Shaded Spruce Blends Pen to colour in a trio of Basic Rhinestones and added them to the card base. I also added a bow made using the same ribbon on a Mini Glue Dot.

Pretty card, I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: