A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

Koala Hugs Get Well Card

Today I am sharing a card made for a lovely lady who is struggling with ill health. I used the Count on Me stamp set to make the card.

 

Colours used in this card are:

 

To recreate the Koala Hugs card, you will need

Rich Razzleberry card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper left and lower right corner
Basic White card – 5⅝” by 3⅞”– rounded upper left and lower right corner
Design a Daydream dsp – 5½” by 1⅛” x 3
Rich Razzleberry – 3” by 3”
Blushing Bride – 2 ½” by 2 ½”
Basic White card – 2 ¼” by 2 ¼”
Basic White card – 5 ½” by 3 ¾” – rounded upper left and lower right corner

 

I used Multipurpose Liquid Adhesive to glue the strips of Design a Daydream designer series paper to the largest piece of Basic White card, leaving a small gap between each strip. The panel was then adhered to the Rich Razzleberry card base.

 

A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Count on Me Stamp set and Dandy Designs dsp used to make a pretty Koala themed get well card

The cute koala image was stamped in memento Tuxedo Black ink onto the small square of Basic White card. This was then die-cut using the Stylish Shapes Dies.

 

A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Count on Me Stamp set and Dandy Designs dsp used to make a pretty Koala themed get well card

Using the same dies, I die-cut a larger circle from the Rich Razzleberry square to add behind the stamped image. I felt the piece needed something else so die-cut a scalloped circle, a tiny bit bigger than the white circle from the square of Blushing Bride card. The three pieces were the glued together.

 

A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Count on Me Stamp set and Dandy Designs dsp used to make a pretty Koala themed get well card

A length of Sweet Sorbet Metallic Woven Ribbon was secured to the back of the Rich Razzleberry circle using Seal +. The whole piece was added to the card front on Dimensionals.

 

A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Count on Me Stamp set and Dandy Designs dsp used to make a pretty Koala themed get well card

The sentiment from the Nature’s Harvest stamp set was inked up with Rich Razzleberry ink and stamped below the dsp strips. I used a Post It Note to mask off the part of the sentiment I didn’t want.

 

A pretty Koala themed get well card made using The Count on Me Stamp set and Dandy Designs dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Count on Me Stamp set and Dandy Designs dsp used to make a pretty Koala themed get well card

A scattering of Pastel Pearls completed the card.

 

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

Easter Bunny card – Share It Sunday Blog Hop

Hello and welcome to the Share it Sunday Blog Hop where we are sharing  a project we have been working on. I am sharing is a pretty Easter bunny themed card made using the Playing in the Rain stamp set and co-ordinating Dies.

 

Colours used in this card are:

 

To recreate the Easter bunny card, you will need:

Granny Apple Green card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper left corner
Basic White card – 5⅛”” by 3⅜” – rounded upper left corner
Dandy Designs dsp – 5” by 3¼“– rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic White card and Dandy Designs dsp

 

Using Multipurpose Liquid Adhesive, I glued the panel of Dandy Designs dsp to the smaller panel of Basic White card. I used the same liquid glue to add the panel to the Granny Apple Green card base.

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

www.crafty-rootes.co.uk – An adorable Easter Bunny card made using the Playing in the Rain stamp set and Dandy Designs dsp

The bunny, from the Playing in the Rain stamp set was stamped onto scrap Basic White card using Memento Tuxedo Black ink. I die cut the image using the Playing in the Rain Dies. I added colour to the ears and nose using Petal Pink Blends Pens.

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

www.crafty-rootes.co.uk – An adorable Easter Bunny card made using the Playing in the Rain stamp set and Dandy Designs dsp

I stamped the same bunny on a scrap of Dandy Designs dsp and fussy cut out the waistcoat which was then glued onto the die-cut bunny. The image was then added to the card front on Dimensionals.

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

www.crafty-rootes.co.uk – An adorable Easter Bunny card made using the Playing in the Rain stamp set and Dandy Designs dsp

The clouds were stamped onto scrap Basic White card using Balmy Blue ink, die-cut and added with liquid glue to the card front.

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

www.crafty-rootes.co.uk – An adorable Easter Bunny card made using the Playing in the Rain stamp set and Dandy Designs dsp

I stamped the sentiments from the Daffodil Delight stamp set in Memento Tuxedo Black ink onto scrap Basic White card and fussy cut out only the words I needed. These were then added to the card front.

 

The Playing in the Rain stamp set and Dandy Designs dsp by Stampin' Up! used to make an adorable Easter Bunny card

www.crafty-rootes.co.uk – An adorable Easter Bunny card made using the Playing in the Rain stamp set and Dandy Designs dsp

A scattering of pastel adhesive backed sequins complete the card.

Please hop along to see what my friends are sharing today.

 

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

Easter Daffodils for the Crafty Challenge Blog Hop

Hello and welcome to the Crafty Challenge Blog Hop where we are sharing projects designed around a sketch. I have used the gorgeous Daffodil Daydream stamp set to make a pretty Easter card.

The colours used in this card are:

 

To recreate the thanks a bunch card, you will need:

Thick Basic White card base – 8” by 8” – scored at 4⅛”
Dandy Designs dsp – 7¾” by 3¾”
Daffodil Delight card – 6” by 2⅝” – all 4 corners rounded
Basic White card – 5⅞” by 2½” – all 4 corners rounded
Basic Black card – 2½” by 2

 

I wrapped a length of White Crinkled Seam Binding around the piece of Dandy Designs designer series paper, securing it on the back with Sellotape. The whole panel was then glued to the Thick Basic White card base.

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper used to make a pretty Easter card for the Crafty Challenge Blog Hop

The bunch of daffodils was stamped in Memento Tuxedo Black ink onto the panel of Basic White card. I also stamped the border image, twice along the bottom.

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper used to make a pretty Easter card for the Crafty Challenge Blog Hop

The flowers were coloured in using the following Blends Pens – So Saffron, Daffodil Delight and Granny Apple Green. I used the light Daffodil Delight and light Granny Apple Green Blends to add some colour to the border.

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper used to make a pretty Easter card for the Crafty Challenge Blog Hop

The sentiment was stamped in Versamark ink onto the piece of Basic Black card, covered it with White Embossing Powder and Heat set it. It was added to the decorated panel with liquid glue.

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper used to make a pretty Easter card for the Crafty Challenge Blog Hop

A ribbon bow and a trio of gold Festive Pearls completed the card. I hope you like it.

 

A pretty Easter card for the Crafty Challenge Blog Hop using the beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Daffodil Daydream stamp set and Dandy Designs designer series paper used to make a pretty Easter card for the Crafty Challenge Blog Hop

Please hop on to share the projects designed by my stamping friends.

 



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

Gnome Valentine card for the Valentine Blog Hop

Hello and welcome to the Valentine Blog Hop where we are sharing…….. you’ve got it….. Valentine themed projects. I have made a sweet card using the super cute Friendly Gnomes stamp set.

 

Colours used in this project are:

 

To recreate the gnome valentine card, you will need:

Petal Pink card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded upper left corner
Basic White card – 5½” by 3¾ “x 2 – one for the inside – Rounded upper left corner
Dandy Design dsp – 5⅜” by 3⅝” – Rounded upper left corner
Basic White card – 4½” by 3½” – Rounded upper left corner

 

Using Multicoloured Liquid Adhesive I glued the Dandy Design dsp to one of the Basic White panels.

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

www.crafty-rootes.co.uk – A pretty Valentines card made using the friendly Gnome stamp set for the Valentine Blog Hop

I wrapped a length of Fresh Freesia Ribbon around the panel and glued it to the Petal Pink card base.

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

www.crafty-rootes.co.uk – A pretty Valentines card made using the friendly Gnome stamp set for the Valentine Blog Hop

The sweet gnomes were stamped in Basic Gray ink onto the 4½” by 3½” panel of Basic White card. I used the Scalloped Contour Dies to Die cut the gnomes.

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

www.crafty-rootes.co.uk – A pretty Valentines card made using the friendly Gnome stamp set for the Valentine Blog Hop

The following gnomes were coloured using the following Blends Pens – Petal Pink, Calypso Coral, So Saffron, Fresh Freesia, Smoky Slate & Naturals Collection (SU1000)

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

www.crafty-rootes.co.uk – A pretty Valentines card made using the friendly Gnome stamp set for the Valentine Blog Hop

The sentiment was stamped on to the decorated panel in Fresh Freesia ink – I actually miss stamped it so stamped again on scrap card, trimmed it down and glued it over the mistake.

 

The Friendly Gnome stamp setby Stampin' Up! used to make a pretty Valentine card for the Valentine Blog Hop

www.crafty-rootes.co.uk – A pretty Valentines card made using the friendly Gnome stamp set for the Valentine Blog Hop

A ribbon bow and a trio of Opaque  Adhesive Backed Gems completed the card.

Please continue to hop along and share the inspiration provided by my stamping friends.

 



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: