A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

Good Luck card for the Stamping Dreams Blog Hop

Hello and welcome to the Stamping Dreams Blog Hop where we are sharing projects on a ‘back to school’ theme. I have chosen to make my good luck card using the sweet Bird’s Eye View stamp set.

Colours used to make my card are:

 

The stack of books was randomly stamped all over the Boho Blue card front in Boho Blue ink.

 

A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

wwww.crafty-rootes.co.uk – The Bird’s Eye View stamp set used to make a good luck card for the Stamping Dreams ‘Back To School’ Blog Hop

The stack of books were stamped onto the smaller panel of Basic White card using Pebbled Path ink. I stamped the same image onto Masking Paper and cut it out using Scissors. I then used it to mask of the first image. The same image was stamped again above the first and the mask removed.

 

A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

wwww.crafty-rootes.co.uk – The Bird’s Eye View stamp set used to make a good luck card for the Stamping Dreams ‘Back To School’ Blog Hop

Using the following Blends Pens, I coloured in the both stacks of books – Petal Pink, Balmy Blue, Fresh Freesia, Soft Sea Foam, Crumb Cake and Smoky Slate. I added the titles using a Pebbled Path Stamp ‘n Write Marker.

 

A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

wwww.crafty-rootes.co.uk – The Bird’s Eye View stamp set used to make a good luck card for the Stamping Dreams ‘Back To School’ Blog Hop

The sentiment, from the Charming Sentiments was stamped in Pebbled Path ink and the panel was glued to the Pebbled Path layer. The whole piece was then mounted onto the Boho Blue card front on Dimensionals.

 

A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

wwww.crafty-rootes.co.uk – The Bird’s Eye View stamp set used to make a good luck card for the Stamping Dreams ‘Back To School’ Blog Hop

The owl was stamped in Pebbled Path ink onto scrap Basic White card, coloured with Smoky Slate and Crumb Cake Blends Pens and cut out with Scissors. I added it to the card front on Dimensionals.

 

A good luck card made for the Stamping Dreams 'Back To School' Blog Hop using the Bird's Eye View stamp set by Stampin' Up!

wwww.crafty-rootes.co.uk – The Bird’s Eye View stamp set used to make a good luck card for the Stamping Dreams ‘Back To School’ Blog Hop

A trio of Tinsel gems completed the card.

Please hop on to share the projects created by my crafty friends.


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

Botanical Layers Stamp-a-Stack

Today I am sharing the 10 cards I designed for my latest Stamp-a-Stack using the Botanical Layers stamp set. Each participant made 2 each of the 10 designs, making 20 cards in total.

Colours used in this project are:

Each participant received a box full of goodies when they arrived. In the box was the Botanical Layers stamp set, 4 ink spots inked with Soft Sea Foam, Lost Lagoon, Berry Burst & Copper Clay ink, a pack of Brushed Metallic Dots, 20 cardstock bases, all the matting layers and stamping layers, die cut and stamped pieces for sentiments and scrap card for stamping sentiments.

 

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

 

Each box was individually decorated as a little extra touch.

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

 

Each box also contained a little sweet treat

Sweet treats made for the Botanical Layers Stamp-a-Stack using the Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The sweet treats made for the Botanical Layers Stamp-a-Stack using the Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin’ Up!

To recreate the cards, you will need:

Card 1

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Copper Clay card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Berry Burst card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 2

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Lost Lagoon card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Copper Clay card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 3

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Berry Burst card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2

Card 4

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Lost Lagoon card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 5

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Copper Clay card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Soft Sea Foam card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 6

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Lost Lagoon card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 7

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Berry Burst card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 8

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Lost Lagoon card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 9

0 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Berry Burst card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2
Basic White – 5 ½” by 3¾” x 2 – for the inside

Card 10

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” x 2
Berry Burst card – 5⅜” by 3⅝” x 2
Basic White card – 5¼” by 3½” x 2

Botanical Layers Stamp-a-Stack

10 cards created for a Stamp-a-Stack using the gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies by Stampin' Up!

www.crafty-rootes.co.uk – The gorgeous Botanical Layers stamp set, Stylish Shapes dies and Deckled Rectangle dies used to create 10 cards for a Stamp-a-Stack

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

Randomly Stamped Pots card for the Stamping With Friends Blog Hop

Hello and welcome to the Stamping With Friends Blog Hop where we are sharing projects made using product from the new 2023 – 2024 Annual Catalogue. I have chosen to use the lovely Earthen Textures stamp set to make my card.

Colours used in this card are:

 

To recreate the randomly stamped pots card, you will need:

Smoky Slate card base – 8¼” by 5⅞” – scored at 4⅛”
Berry Burst card – 5⅛” by 3⅜”
Basic White card – 5” by 3 ¼”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

 

The tall pot was randomly stamped in Smoky Slate ink (looks like I didn’t clean the stamp well enough as there is a pink tinge to some of the images) onto the smaller panel of Basic White card. The smaller pot was then stamped in the spaces between using Berry Burst ink.

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

www.crafty-rootes.co.uk – A card featuring randomly stamped pots, made using the Earthen Texture stamp set for the Stamping With Friends Blog Hop

 

A length of White Glittered Organdy Ribbon was wrapped around the panel and secured on the back with Seal+ adhesive. The panel was the mounted onto the Smoky Slate card front on Dimensionals.

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

www.crafty-rootes.co.uk – A card featuring randomly stamped pots, made using the Earthen Texture stamp set for the Stamping With Friends Blog Hop

 

Using Multipurpose Liquid Adhesive to glue the stamped piece to the Berry Burst layer.

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

www.crafty-rootes.co.uk – A card featuring randomly stamped pots, made using the Earthen Texture stamp set for the Stamping With Friends Blog Hop

 

A 2” Circle was punched from scrap Basic White card. I stamped the sentiment from the Charming Sentiments stamp set in Berry Burst ink onto the circle and added the ‘grass’ image in 2nd generation Smoky Slate ink. The circle was added to the card from using liquid glue.

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

www.crafty-rootes.co.uk – A card featuring randomly stamped pots, made using the Earthen Texture stamp set for the Stamping With Friends Blog Hop

I added a White Glittered Organdy Ribbon bow to the card front on a Mini Glue Dot to complete the card.

 

The Earthen Texture stamp set by Stampin' Up! used to make a card featuring randomly stamped pots for the Stamping With Friends Blog Hop

www.crafty-rootes.co.uk – A card featuring randomly stamped pots, made using the Earthen Texture stamp set for the Stamping With Friends Blog Hop

 

Please hop over to see what my lovely friends have created to share with you today.


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

Pretty Medallion card

I have been playing with the beautiful Pretty Medallion stamp today and have used some soft pastel shades to colour in the image.

Colours used in this project are:

 

To recreate the pretty medallion card, you will need:

Pool Party card base – 8¼” by 5⅞” scored and folded at 4⅛”
Fresh Freesia card – 4⅞” by 3⅞”
Basic White card – 12.3cms by 9cms
Basic White card – 4” by 1¾”
Fresh Freesia card – 4” by ¼”
Basic White – 5⅞” by ¾”
Basic White card – 5½” by 3¾” – for the inside

 

I mounted the Pretty Medallion stamp onto a Stamparatus Plate, inked it up with Memento Tuxedo Black ink and stamped it onto the 12.3cms by 9cms panel of Basic White card. I actually re-inked and stamped 3 times to get a nice rich black. I repeated this with the 5⅞” by ¾” strip of Basic White.

 

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Pretty Medallion stamp set by Stampin’ Up! used to make a very pretty, pastel card

The image was coloured with the following Blends Pens – Pool Party, Fresh Freesia, Petal Pink and So Saffron. I used the same colours to colour the stamped strip.

 

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Pretty Medallion stamp set by Stampin’ Up! used to make a very pretty, pastel card

Using a trimmer, I cut the coloured panel from top to bottom into 3 panels each 3cms wide. These were then glued to the Fresh Freesia layer and added this to the Pool Party card front on Dimensionals.

 

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Pretty Medallion stamp set by Stampin’ Up! used to make a very pretty, pastel card

The sentiment, from the Charming Sentiments stamp set was stamped in Memento Tuxedo Black ink onto the small strip of Basic White card. I cut it down using scissors and added the thin strip of Fresh Freesia card along the bottom. This was then tucked under the decorated panel.

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Pretty Medallion stamp set by Stampin’ Up! used to make a very pretty, pastel card

I coloured the Pastel Pearls were coloured with a Pool Party Blends Pen and were added to the card front.

 

A pretty pastel card featuring the Pretty Medallion stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Pretty Medallion stamp set by Stampin’ Up! used to make a very pretty, pastel card

I love this colour combo. I hope you like it x

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

Wonderful Iris card

I can’t get enough of the Wonderful World Sale-a-Bration stamp set and have made a pretty birthday card using the Iris image.

Colours used in this project are:

 

To recreate the wonderful Iris card, you will need:

Pear Pizzazz card base – 8¼” by 5⅞” scored and folded at 4⅛”
Flirty Flamingo card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Flirty Flamingo card – 3” by 2½”
Basic White card – 2½” by 2¼”
Wonderful World dsp – 3 ¾” by ½”
Basic White card – 5½” by 3¾” – for the inside

 

I ran the 5¼” by 3½” panel of Basic White card through the Stampin’ Cut & Emboss Machine with the Hive Embossing Folder. The embossed panel was glued to the Flirty Flamingo layer with Multipurpose Liquid Adhesive. I added it to the Pear Pizzazz card front using the same glue.

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

www.crafty-rootes.co.uk – The Iris from the Wonderful World stamp set used to make a pretty pink iris card

Using the Beautiful Shapes dies, I cut a hexagon from the small piece of Basic White card and a slightly larger hexagon from the Flirty Flamingo card.

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

www.crafty-rootes.co.uk – The Iris from the Wonderful World stamp set used to make a pretty pink iris card

I flagged the ends of the strip of designer series paper and added it to the card front.

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

www.crafty-rootes.co.uk – The Iris from the Wonderful World stamp set used to make a pretty pink iris card

Using a Flirty Flamingo Stampin’ Write Marker I added ink to the Iris flower. I used a Pear Pizzazz Stampin’ Write Marker to add colour to the stem and leaves. I huffed on the inked stamp and stamped it onto the Basic White hexagon. The image was added to the card front on Dimensionals.

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

www.crafty-rootes.co.uk – The Iris from the Wonderful World stamp set used to make a pretty pink iris card

The sentiment, from the Charming Sentiments stamp set was stamped in Old Olive ink onto scrap Basic White card and die cut using the Sentiment Silhouette Dies. It was added to the card front on Dimensionals.

 

The Wonderful World stamp set by Stampin' Up! used to make a pretty pink iris card

www.crafty-rootes.co.uk – The Iris from the Wonderful World stamp set used to make a pretty pink iris card

A trio of Brushed Brass Butterflies completed the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

Lovely You card for the Ink & Inspirations Blog Hop

Hello and welcome to the Ink & Inspirations Blog Hop where we have a picture to work from. I have chosen to use the colours of the picture for my lovely you card.

Colours used in this project are:

 

To recreate the lovely you card, you will need:

Pear Pizzazz card base – 8¼” by 5⅝” scored at 4⅛”
Pacific Point card – 5¼” by 3½”
Basic White card – 5⅛” by 3⅜”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾”
Scrap Pacific Point

 

I die cut a stitched circle using the Stylish Shapes Dies, placed it onto the 5⅛” by 3⅜” panel of Basic White and drew around it with a pencil. This helped me to plan where to stamp my images.

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

The bushy leaves were stamped in Soft Succulent around the pencilled circle. I added the trio of leaves in Pear Pizzazz ink.

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

Next, I inked up the flower and stem using Pacific Point for the flower and Cajun Craze for the stem and leaves. These were added around the circle. Next, I added the thin sprig in Evening Evergreen ink.

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

Finally, I added the single flower in 1st & 2nd generation Pacific Point ink. I rubbed the pencil line out with a rubber. The whole panel was added to the Pacific Point panel with Multipurpose Liquid Adhesive and I used the same glue to adhere the panel to the Pear Pizzazz card front.

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

The sentiment from the Charming Sentiments stamp set was stamped in Cajun Craze ink onto the die cut stitched circle. One side of the circle was trimmed down and the circle added on Dimensionals.

 

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

A small butterfly was die cut from scrap Pacific Point card using the Daffodil Dies. The butterfly was added to the card front along with a trio of Basic Rhinestones to complete the card.

Not a colour combo I would have chosen but I really like how the card has turned out. I hope you like it.


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: