To recreate the birthday balloon card, you will need:
Parakeet Party card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded Upper right corner Blackberry Bliss card – 5⅛” by 3⅝” – Rounded Upper right corner Basic White card – 5” by 3½” Rounded Upper right corner Basic White card – 5½” by 3¾” – for the inside – Rounded Upper right corner
I began by stamping the sentiment from the Biggest Wishes stamp set along the bottom of the 5” by 3½” panel of Basic White card.
wwww.crafty-rootes.co.uk -A vibrant happy birthday card made using the Beautiful Balloons and Biggest Wish stamp sets
The balloons were then stamped in Parakeet Party, Lemon Lolly and Blackberry Bliss ink. I balloon on the right was stamped in Lemon Lolly but I obviously hadn’t cleaned the stamp properly as it looks more apricot in colour!
wwww.crafty-rootes.co.uk -A vibrant happy birthday card made using the Beautiful Balloons and Biggest Wish stamp sets
The balloon strings were stamped in Parakeet Party and Blackberry Bliss ink.
wwww.crafty-rootes.co.uk -A vibrant happy birthday card made using the Beautiful Balloons and Biggest Wish stamp sets
The stamped panel was glued to the Blackberry Bliss panel leaving the dark colour showing only on the left side and the top. The whole piece was glued to the Parakeet Party card base using the same liquid glue.
wwww.crafty-rootes.co.uk -A vibrant happy birthday card made using the Beautiful Balloons and Biggest Wish stamp sets
A trio of Iridescent Pearls completed the card. A very bright colour combo.
wwww.crafty-rootes.co.uk -A vibrant happy birthday card made using the Beautiful Balloons and Biggest Wish stamp sets
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Crafty Challenge Blog Hop where we are sharing projects based around 5 suggested options, we could choose to use some or all of the suggestions; these are Subtles colour family, Masking, Standard Horizontal, Ribbon, For You sentiment. I have made my card using the Beautiful Balloons stamp set and all 5 options.
To recreate the pastel balloons card you, will need:
Lost Lagoon card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black card – 5⅜” by 3⅝” Basic White card – 5¼” by 3½” Basic White card – 5½” by 3¾” Basic Black card – 1” by ½”
I stamped the medium sized balloon onto a stack of Post It Notes and trimmed them out using Paper Snips, these would act as my masks.
wwww.crafty-rootes.co.uk – A row of balloons made using pastel colours and masking for the Crafty Challenge Blog Hop
The first balloon was stamped in the centre of the smaller panel in Lost Lagoon ink, I covered it with one of the masks and stamped the next balloon on the right in Petal Pink ink. This balloon was masked off and the next balloon stamped in Lemon Lolly ink. I repeated the masking and stamped the last balloon on the right-hand side in Balmy Blue ink.
wwww.crafty-rootes.co.uk – A row of balloons made using pastel colours and masking for the Crafty Challenge Blog Hop
The same masking and stamping were repeated in Fresh Freesia, Pool Party and Bubble Bath. Finally, I added an extra one using Highland Heather ink. The balloon strings were stamped with Memento Tuxedo Black ink. The stamped panel was then added to the Basic Black layer using Multipurpose Liquid Adhesive.
wwww.crafty-rootes.co.uk – A row of balloons made using pastel colours and masking for the Crafty Challenge Blog Hop
A small piece of Black & White Gingham Ribbon was wrapped around the lower right corner and secured on the back with Sellotape.
wwww.crafty-rootes.co.uk – A row of balloons made using pastel colours and masking for the Crafty Challenge Blog Hop
The sentiment from the Color & Contour stamp set was stamped in Versamark ink, covered it with White Embossing Powder and set it with my Heat Tool. I added the sentiment over the ribbon with a Mini Glue Dot on each side.
wwww.crafty-rootes.co.uk – A row of balloons made using pastel colours and masking for the Crafty Challenge Blog Hop
The panel was then mounted onto the Lost lagoon card base on Dimensionals. A trio of Classic Matte Dots completed the card.
Please hop over to see what my crafty friends have made to share with us today.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Bubble Bath card base – 8¼” by 5⅞” – scored at 2 1/16” on either end Orchid Oasis 5” & 3” x 2 Basic White – 4⅞” by 2⅞” Basic White – 5½” by 3¾” – inside Scrap Basic White & Lemon Lolly
Using the smaller balloon image, we stamped in Bubble Bath in in the upper left and lower right corners of the Bubble Bath card base.
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
We used the infill, starry balloon image to stamp a background in Orchid Oasis ink all over the smaller panel of Basic White card. This panel was then adhered to the Orchid Oasis layer.
A selection of balloons were stamped onto scrap Basic White card in in Bubble Bath, Lemon Lolly and Orchid Oasis inks. They were die cut using the Beautiful Balloons dies. We also die cut the ribbon streamer in Lemon Lolly ink.
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
We placed the balloons onto the stamped panel and stamped ‘strings’ under a couple of the balloons. The balloons were then added to the panel with liquid glue or Dimensionals.
The decorated panel was then added to the left side of the Bubble Bath card front.
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
The sentiment was stamped in Lemon Lolly ink onto Basic White card, trimmed down and added to the card front.
Balloon & Bunting Card
Orchid Oasis card base – 8¼” by 5⅞” – scored at 4⅛” Bubble Bath – 4⅞” by 3” Bubble Bath – 5” by 2⅞” Basic White 5½” by 3¾” Scrap Basic White & Lemon Lolly
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
Using the long streamer image, we stamped down the length of the small panel of Basic White card using Bubble Bath, Lemon Lolly and Orchid Oasis inks.
The stamped panel was then glued to the Orchid Oasis layer and mounted onto the Orchid Oasis card base on Dimensionals.
The large balloon was stamped in Lemon Lolly ink onto scrap Basic White card.
Confetti was stamped onto the balloon in Orchid Oasis ink and the balloon was die cut out. It was added to the card front on Dimensionals. A White Baker’s Twine bow was added to the bottom of the balloon with a Mini Glue Dot.
The sentiment was stamped in Orchid Oasis ink onto scrap Lemon Lolly card. This was trimmed down and added to the card front.
Mini Balloons card
Lemon Lolly card base – 8¼” by 5⅞” – scored at 4⅛” Orchid Oasis – 5⅞” by 2¾” Basic White – 5⅞” by 2½” Basic White – 4⅛” by 1” Basic White – 5½” by 3¾”
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
The smallest balloon was stamped randomly onto the long thin panel of Basic White card in Bubble Bath ink.
We then stamped the image again in Lemon Lolly ink and finally in Orchid Oasis ink. We made sure to overlap some of the images. The stamped panel was then glued to the Orchid Oasis layer.
The panel was added to the card front on Dimensionals.
The sentiment was stamped in Orchid Oasis ink onto the strip of Basic White card. This was added to the card front with Dimensionals on either end.
www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Stampin Dreams Blog Hop where we are sharing projects celebration a graduation. I have made my card using star shape from the Beautiful Balloons Dies.
To recreate the you’re a star card, you will need:
Azure Afternoon card base – 8¼” by 5⅞” – scored at 4⅛” Real Red card – 4¾” by 3” Basic White card – 4½” by 2¾” Basic Black card – 3” by ¾” Basic White card – 5½” by 3¾” Scrap Basic White, Daffodil Delight, Real Red and Azure Afternoon
I began by die-cutting the large and small stars using the dies from the Beautiful Balloons die set and scrap Daffodil Delight, Real Red and Azure Afternoon card.
www.crafty-rootes.co.uk – The Beautiful Balloons Dies used to make a fabulous graduation card for the Stampin Dreams Blog Hop
The die cut stars were then laid out onto the small panel of Basic White card to work out the positioning. Once I had them arranged, I lifted them one at a time and glued them in place using Multipurpose Liquid Adhesive.
www.crafty-rootes.co.uk – The Beautiful Balloons Dies used to make a fabulous graduation card for the Stampin Dreams Blog Hop
The overhanging pieces of stars were trimmed off with scissors and the layer was glued to the Real Red panel which was added to the Azure Afternoon card base on Dimensionals.
www.crafty-rootes.co.uk – The Beautiful Balloons Dies used to make a fabulous graduation card for the Stampin Dreams Blog Hop
I tucked strips of Basic White, Daffodil Delight and Real Red card under the lower right-hand corner.
www.crafty-rootes.co.uk – The Beautiful Balloons Dies used to make a fabulous graduation card for the Stampin Dreams Blog Hop
The sentiment, from the Charming Sentiments stamp set, was stamped in Versamark ink onto the strip of Basic Black ink, covered it with White Embossing Powder and used my Heat Tool to set it. I flagged the ends before adding it to the card front on Mini Glue Dots as I did not want to add anymore height to the card.
www.crafty-rootes.co.uk – The Beautiful Balloons Dies used to make a fabulous graduation card for the Stampin Dreams Blog Hop
A trio of Pastel Adhesive-Backed Sequins completed the card.
Please continue around the hop to see want lovely projects my friends have to share today.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Supplies used:
Loading Comments...
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.