Hello and welcome to the Stamp ‘n Hop Blog Hop where we are sharing projects inspired by the theme of Flora or Fauna. I have gone with flora and used the stunning Enduring Beauty Bundle to make my card.
To recreate the embossed enduring beauty card, you will need:
Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 4⅞” by 3½” One Horse Open Sleigh dsp – 5¼” by 4” Basic White card – 5” by 4” Soft Sea Foam card – 2¼” by ½” Basic White card – 5½” by 3¾”
Using the Deckled Rectangles, I die cut a rectangle from the piece of One Horse Open Sleigh dsp. This was then glued to the 5” by 4” piece of Basic White card. I wrapped a piece of Iridescent Ribbon around the panel and adhered the piece to the Soft Sea Foam card base.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
The large floral image was stamped in Versamark ink. I covered it with Black Embossing Powder and heat set it.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
Using washi tape I secured the embossed panel of Basic White card to my Glass Mat. The first mask was positioned on top and held in place with more washi tape.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
I used a Blending Brush to ink through the mask with Highland Heather ink. Using mask number 3, a Blending Brush and Gorgeous Grape ink I added the detailed layer of ink to the flowers.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
The 2nd mask was positioned, exposing the leaves. Using Blending Brushes I lightly inked with Old Olive. I decided not to add the detailed image as the black embossing gives a lot of dimension already.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
I die cut the floral image using the Enduring Beauty Dies and mounted the die cut piece on Dimensionals to the card front.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies and Masks used to make a gorgeous thank you card for the Stamp ‘n Hop Blog Hop
The sentiment, from the Earthen Textures stamp set was stamped in Gorgeous Grape ink onto the strip of Soft Sea Foam ink. The sentiment was then added to the card front/
A trio of Purple Gems completes the card.
Please hop over to share the inspiration provided by my stamping friend.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
It is Christmas Stampathon time again and the theme for February is cards and matching tags and as per the rules of the Stampathon we have to make multiples. I have used the gorgeous new stamp set called Encircled in Nature, available in my online shop.
To recreate the encircled Christmas card, you will need:
Balmy Blue card base – 8¼” by 5⅞” – scored at 4⅛” Shaded Spruce card – 5⅜” by 3⅝” Basic White card – 5¼” by 3½” Balmy Blue card – 3” by ½” Basic White card – 5½” by 3¾” – for the inside Scrap Shaded Spruce card
I stamped the wreath image, from the Encircled in Nature stamp set in Pecan Pie ink onto the 5¼” by 3½” panel of basic white card.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards for the Christmas Stampathon
Using a Stencil previously die cut using the largest of the circular Stylish Shapes Dies – the negative circle fits beautifully over the stamped wreath – I inked the background in the Balmy Blue ink using a Blending Brush.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards for the Christmas Stampathon
The arc of pine trees were stamped in Shaded Spruce ink inside the stamped ring.
A piece of the gorgeous Copper Ribbon was wrapped around the panel and secured on the back with Sellotape. The decorated panel was then glued to the Shaded Spruce layer and then to the Balmy Blue card base.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards for the Christmas Stampathon
The sentiment, from the Ringed with Nature stap set was stamped in Shaded Spruce ink onto the small piece of Balmy Blue card. I angle cut the ends and added the sentiment over the ribbon, securing it in place with Mini Glue Dots.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards for the Christmas Stampathon
I die cut the larger solid tree and the bigger group of trees from scrap Shaded Spruce card. I added the large tree on Dimensionals to the card front. I then cut off the 3 smaller trees from the group and added the remaining 2 trees inside the circle with glue.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards for the Christmas Stampathon
Inking only one of the group of stars and crescent moon with Misty Moonlight ink, randomly over the background. A trio of Solid Faceted Gems finished off the card.
To recreate the encircled Christmas tags, you will need:
Basic White card – 4” by 3” Balmy Blue card – 4” by 3”
Using the large tag from the Merriest Trees Dies, I die cut a tags from both the the Basic White and Balmy Blue card pieces. I made 4 tags in total.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas tags for the Christmas Stampathon
2 tags were placed side by side and the wreath stamped on both in Pecan Pie ink. I used a Blending Brush to add Balmy Blue ink inside the stamped wreath.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas tags for the Christmas Stampathon
The trees were then added in Shaded Spruce and some of the cut off die cut trees added with glue.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas tags for the Christmas Stampathon
The sentiment was stamped on the tag in Shaded Spruce ink.
The Balmy Blue label was the glued behind the stamped tag, slightly offset.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas tags for the Christmas Stampathon
A length of Copper Ribbon was then fed through the hole at the top of the tag to finish the tags off.
www.crafty-rootes.co.uk – The Encircled in Nature stamp set and dies used to make Christmas cards and tags for the Christmas Stampathon
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Technique Tuesday Blog Hop where we are sharing projects showcasing colouring with Blends. I have used the Enduring Beauty stamp set to use my lemon floral card.
Old Olive card base – 8¼” by 5⅞” – scored at 4⅛” Sunny Days dsp – 5¼” by 3¾” Old Olive card – 4⅞” by 3½” Basic White card – 5¼ ” by 3¾” Old Olive card – 2⅞” by ½” Basic White card – 5½” by 3¾” – for the inside
Using Multipurpose Liquid Adhesive I glued the panel of Sunny Days dsp to the Old Olive card front.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies used to make a lovely yellow floral birthday card
The large floral image from the Enduring Beauty stamp set was stamped in Memento Tuxedo Black ink onto the 5¼ ” by 3¾” piece of Basic White card.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies used to make a lovely yellow floral birthday card
Using the following Blends Pens I coloured in the image – Lemon Lolly, Daffodil Delight, Soft Sea Foam & Old Olive.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies used to make a lovely yellow floral birthday card
The coloured panel was then die cut using the Deckled Rectangle Dies. I glued the deckled rectangle to the piece of Old Olive card and added it to the card front on Dimensionals.
A small piece of Tear & Tape was used to adhere the Gold Ribbon to the card front.
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies used to make a lovely yellow floral birthday card
The sentiment, from the Artistically inked stamp set was stamped in Versamark ink onto the strip of Old Olive card. I covered it with White Embossing Powder and set it using my Heat Tool. I added it over the ribbon with Mini Glue Dots
www.crafty-rootes.co.uk – The Enduring Beauty stamp set and dies used to make a lovely yellow floral birthday card
A trio of Glossy Dots finish off the card.
Please hop along to see what inspiration my fellow crafters have to share with us today.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Oh my goodness, I love the new Latte Love stamp set, one of our new online exclusive product which will be available from the 5th March. I am not a big coffee drinker but I do love a mug!
Tahitian Tide card base – 8¼” by 5⅞” – scored at 4⅛” Pecan Pie card – 5⅛” by 3⅜” Basic White card – 5” by 3¼” Pecan Pie card – 2½” by ½” Parakeet Party card – 2½” by ¼” Basic White card – 5½” by 3¾” – for the inside Scrap Basic White card
I mounted the group of coffee beans and the single bean together on the same block and randomly stamped these around the edges of the Tahitian Tide card front in Tahitian Tide ink. This gives a subtle texture to the card front.
www.crafty-rootes.co.uk – A coffee mug themed thank you card made using the Latte Love stamp set from Stampin’ Up!
The ‘splash’ image was randomly stamped all over the 5” by 3¼” panel of Basic White card using 1st, 2nd & 3rd generation Pecan Pie ink. I used a Blending Brush to add colour around the edges of the panel in the same Pecan Pie ink. The whole piece was then glued to the Pecan Pie layer.
www.crafty-rootes.co.uk – A coffee mug themed thank you card made using the Latte Love stamp set from Stampin’ Up!
A length of Tahitian Tide Metallic Ribbon was wrapped around and tied in a bow on the left-hand side. I used a little Tear & Tape to secure the rinbbon on the back. The panel was glued to the Tahitian Tide card front.
www.crafty-rootes.co.uk – A coffee mug themed thank you card made using the Latte Love stamp set from Stampin’ Up!
Two mugs were stamped in Memento Tuxedo Black ink onto scrap Basic White card, I stamped the coffee in the top of the mugs using Pecan Pie ink. The mugs were then die cut using the Latte Love dies. I used the following Blends Pens to colour in the mugs – Parakeet Party and Tahitian Tide. The mugs were then added to the card front on Dimensionals.
www.crafty-rootes.co.uk – A coffee mug themed thank you card made using the Latte Love stamp set from Stampin’ Up!
The sentiment was stamped in Versamark ink onto the strip og Pecan Pie card, covered with White Embossing Powder and heat set. I flagged the ends of the sentiment and the ends of the strip of Parakeet Party card which was glued behind the sentiment. The hole piece was added, over the ribbon to the card front.
www.crafty-rootes.co.uk – A coffee mug themed thank you card made using the Latte Love stamp set from Stampin’ Up!
A scattering of Adhesive backed Sequins completed the card. Isn’t it fun?
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact ,me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Stamping with Friends Blog Hop where we are creating projects based on a Tic, Tac, Toe board. I have chosen to use the line down the left hand side – Thank you, Embossing & DSP. I used the Masterfully Made designer series paper and the layered Florals 3D Embossing Powder to make my card.
To recreate the Masterfully Made card, you will need:
Starry Sky card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 5⅜” by 3⅝” Masterfully Made dsp – 5¼” by 3½” Basic White card – 5½” by 3¾” – for the inside Scrap Basic White & Fresh Freesia
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
Using the Layered Florals 3D Embossing Folder I ran the panel of dsp through the Stampin’ Cut & Emboss machine using the Speciality Plate. I placed the embossed piece on my Glass Mat with the de-bossed side uppermost.
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
The Starry Sky ink pad was then repeatedly rubbed over the dsp panel until the colour was dark enough and the Fresh Freesia dsp showed up nicely. The inked dsp panel was then glued to the 5⅜” by 3⅝” layer of Basic White card.
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
A length of ribbon was then wrapped around the panel, secured with Tear & Tape and the whole piece was then glued to the Starry Sky card base.
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
One of the pretty frames from the Heartfelt Hexagon stamp set was stamped onto scrap Fresh Freesia using Starry Sky ink. The frame was then punche out using the Heartfelt Hexagon Punch. The sentiment, from the Biggest Wish stamp set was stamped inside the frame using the same ink. I punched a white hexagon, cut it in half from side to side and glued it to the reverse of the sentiment with a little bit peeking out at the top and the bottom. The sentiment was mounted over the ribbon on Dimensionals.
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
A trio of Tinsel Gems as added to the sentiment label and a Glittered Organdy bow completed the card.
www.crafty-rootes.co.uk – The pretty Layered Florals 3D Embossing Folder used with the Masterfully Made dsp to make a pretty thank you card
Please hop on to see what my crafty friends have chosen to use today.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact ,me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Today, I am sharing the projects designed for my Hills of Tuscany Stamp-a-stack. I love, love this stamp set and couldn’t wait to share it with my crafty ladies. There is a little bit of a learning curve with this set and to help the ladies out I created a cheat sheet to help them work out what each image does. I also suggested that they use their grid paper to test drive all the images in 1st and 2nd generation ink and to starting putting images together.
www.crafty-rootes.co.uk – Hills of Tuscany Crib Sheet made for the Hills of Tuscany Stamp-a-Stack event March 2024
In their kit each lady received the Hills of Tuscany stamp set, linen thread and Enamel Dots. 5 mini ink pads in Pool Party, Misty Moonlight, Garden Green, Calypso Coral & Daffodil Delight. All the card bases, layers, die cut pieces and embossed pieces to make 20 cards – 2 each of 10 designs plus envelopes and as the order went in during Sale-a-Bration each lady also received the Heartfelt Hellos stamp set and as usual there was a little chocolate treat to enjoy.
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Pool Party card bases – 8¼” by 5⅞” – scored at 4⅛” x 2 Basic Black card – 2⅞” by 2⅞” x 2 Basic White stitched square x 2 Basic White card – 5½” by 3¾” x 2 for the insides Daffodil Delight, Garden Green, Misty Moonlight 1” by ⅜” – 2 of each
Card 2
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black Deckled Circle Basic White stitched circle Pool Party & Garden Green 4⅛” by ⅜” – 1 of each
Card 3
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black card – 4⅛” by 3⅛” Basic White card – 4” by 3”2 Basic White card – 5½” by 3¾” – for the inside
Card 4
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Misty Moonlight card bases – 8¼” by 5⅞” – scored at 4⅛” Basic Black card – 4¼” by 3” Basic White card – 4⅛” by 2⅞” Basic White card – 5½” by 3¾” – for the inside
Card 5
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Crumb Cake card base – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 5⅝” by 2⅝” New Horizon dsp – 5½” by 2½” Basic White – 5½” by 3¾” for the inside Basic White card – ¼” strip
Card 6
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Pool Party card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black deckled circle Basic White stitched circle Basic White card – 5½” by 3¾”
Card 7
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Crumb Cake card base – 8¼” by 5⅞” – scored at 4⅛” Basic Black card – 4⅞” by 3¼” Basic White card – 5” by 3⅛” Basic White card – 5½” by 3¾” – for the inside
Card 8
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Thick Basic White card bases – 8¼” by 5⅞” – scored at 4⅛” Basic White card – 5⅝” by 3⅞” – embossed Basic Black card – 2⅞” by 2⅞” Basic White stitched square Pol Party, Misty Moonlight & Garden Green – 1” by ⅜” – 1 of each
Card 9
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Crumb Cake card base – 8¼” by 5⅞” – scored at 4⅛” Crumb Cake card -5⅝” by 3⅞” – embossed Basic White nested essentials Dies Basic White smaller nested essentials Dies Basic White card – 5½” by 3¾” – for the inside
Card 10
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Misty Moonlight card base – 8¼” by 5⅞” – scored at 4⅛” Basic White nested essentials Dies Basic White smaller nested essentials Dies Basic White card – 5½” by 3¾” – for the inside
www.crafty-rootes.co.uk – The gorgeous Hills of Tuscany stamp set used to make projects for my March 2024 Stamp-a-Stack event
Please hop on to see what my crafty friends have to share with us today.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Today I have been trying out a technique that is new to me …….. and I LOVE it! I saw fellow demonstrator Tina Zinck demonstrate this on Youtube and couldn’t wait to try it. I use the Layered Florals 3D Embossing Folder to make my card.
To recreate the layered florals card, you will need:
Fresh Freesia card base – 8¼” by 5⅞” – scored at 4⅛” Lemon Lolly card – 5⅝” by 3⅞” Basic White card – 5½” by 3¾” x 2 – one for the inside Scrap Basic White
I embossed one of the 5½” by 3¾” panels of Basic White card using the Layered Florals 3D Embossing Folder.
The embossed panel was then placed face down on my desk. I added colour to the petals of the larger flowers with Fresh Freesia ink. Tina used small Blending Brushes but I used Sponge Daubers and they seemed to work just as well.
www.crafty-rootes.co.uk – The Layered Florals 3D Embossing Folder used with the reverse embossing technique to create a gorgeous thank you card
The centres of the larger flowers were added with Daffodil Delight ink. The smaller flowers were inked with Lemon Lolly ink and all the leaves were coloured with Granny Apple Green ink.
www.crafty-rootes.co.uk – The Layered Florals 3D Embossing Folder used with the reverse embossing technique to create a gorgeous thank you card
I then repeatedly ran my Memento Tuxedo Black ink pad all over the reverse side of the embossed panel to build up the depth of colour. Love how the dark ink makes the bright colours pop out.
www.crafty-rootes.co.uk – The Layered Florals 3D Embossing Folder used with the reverse embossing technique to create a gorgeous thank you card
The inked panel was glued onto the Lemon Lolly panel and a length of Lemon Lolly Sheer Ribbon wrapped around it. The whole piece was then glued to the Fresh Freesia card base.
www.crafty-rootes.co.uk – The Layered Florals 3D Embossing Folder used with the reverse embossing technique to create a gorgeous thank you card
I stamped the sentiment, from the Something Fancy stamp set in Memento Basic Black ink onto scrap Basic White card and die cut it using the Everyday Details dies.
www.crafty-rootes.co.uk – The Layered Florals 3D Embossing Folder used with the reverse embossing technique to create a gorgeous thank you card
Using Lemon Lolly Baker’s Twine and an embroidery needle I stitched around the die cut circle. Annoyingly, I had smeared the the sentiment whilst stitching……..urghhh. After a lot of fiddling around, I stamped the sentiment again onto the scarp Basic White card and die cut it with the smallest circle dies from the same set. This was glued over the smeared ink and the stitching still looked great. Win, win.
A trio of adhesive backed Solid Gems finished the card.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Here is a pretty lemon magnolia card made using the Magnolia Mood stamp set and dies in combination with the Simply Sophisticated stamp set and embossing folder.
To recreate the lemon magnolia card, you will need:
Lemon Lolly card base – 8¼” by 5⅞” – scored at 4⅛” Pecan Pie card – 5⅜” by 3⅝” Basic White card – 5⅛” by 3⅜” Basic White card – 5½” by 3¾” – for the inside Pecan Pie card – 1 ¾” by ½” Scrap Basic White card
Using the Softly Sophisticated 3D Embossing Folder I embossed the 5⅛” by 3⅜” piece of Basic White card. The embossed panel was then adhered to the Pecan Pie layer.
www.crafty-rootes.co.uk – The stunning Magnolia Mood stamp set and Dies used to make a beautiful lemon magnolia card
I wrapped a length of Sheer Ribbon around the panel and then glued it to the Lemon Lolly card base.
www.crafty-rootes.co.uk – The stunning Magnolia Mood stamp set and Dies used to make a beautiful lemon magnolia card
The gorgeous, large floral image from the Magnolia Mood stamp set, was stamped in Memento Tuxedo Black ink onto scrap Basic White card and die cut using the Magnolia Mood dies.
www.crafty-rootes.co.uk – The stunning Magnolia Mood stamp set and Dies used to make a beautiful lemon magnolia card
The following Blends Pens were used to colour in the image – Lemon Lolly, Soft Sea Foam & Pecan Pie. I used the Color Lifter to give a little points of light to the petals. The floral image was then added to the card front on Dimensionals.
www.crafty-rootes.co.uk – The stunning Magnolia Mood stamp set and Dies used to make a beautiful lemon magnolia car
The sentiment, from the Softly Sophisticated stamp set was stamped in Versamark ink onto the scrap of Pecan Pie card. I covered it with White Embossing Powder and heat set it with my Heat Tool. I added it to the card with a dimensional.
www.crafty-rootes.co.uk – The stunning Magnolia Mood stamp set and Dies used to make a beautiful lemon magnolia card
A trio of Opaque Faceted Gems completed the card.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
I have been playing with the Simply Zinnias stamp set, one of our new online exclusives which will be available from the 5th March 2024 and it is gorgeous. I have made a stunning zinnias thank you card.
To recreate the stunning zinnias card, you will need:
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Pumpkin Pie card – 5⅝” by 3⅞” Flight & Airy dsp – 5½” by 3¾” Stargazing dsp – 3¾” by 1” Basic White card – 5” by 4” x 2 Scrap Basic White card
The panel of Flight & Airy designer series paper (dsp) was glued to the Pumpkin Pie layer. The strip of Stargazing dsp was glued across the panel.
www.crafty-rootes.co.uk -The new Simply Zinnias stamp set and Simply Zinnias dies used to make a lovely floral thank you card
Some Linen Thread was wrapped, twice around the panel before it was glued down to the Thick Basic White card base.
www.crafty-rootes.co.uk -The new Simply Zinnias stamp set and Simply Zinnias dies used to make a lovely floral thank you card
The gorgeous spray of zinnias was stamped in Memento Tuxedo Black ink onto one of the 5” by 4” panels of Basic White card. It was then die cut using the Simply Zinnia Dies.
www.crafty-rootes.co.uk -The new Simply Zinnias stamp set and Simply Zinnias dies used to make a lovely floral thank you card
The spray of flowers were coloured in using the following Blends Pens – Lemon Lolly, Daffodil Delight, Pumpkin Pie, Berry Burst, Old Olive and Pecan Pie.
www.crafty-rootes.co.uk -The new Simply Zinnias stamp set and Simply Zinnias dies used to make a lovely floral thank you card
I die cut a background panel using the Scalloped Contour Dies and added it to the card front on Dimensionals. The flowers were then added to the panel on Dimensionals.
The sentiment was stamped in Old Olive ink onto scrap Basic White card, I masked off the part of the sentiment I did not want before stamping. The sentiment was then die cut using the Deckled Rectangle Dies. I ran it through my cut and emboss machine twice to make the label smaller. I used a Blending Brush to add Old Olive ink around the edges of the label before adding it to the card front on Dimensionals.
www.crafty-rootes.co.uk -The new Simply Zinnias stamp set and Simply Zinnias dies used to make a lovely floral thank you card
A linen Twine bow and a scattering of Solid Gems finished the card.
Order goodies/Join My Team
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Hello and welcome to the Crafty Challenge Blog Hop where we are sharing projects inspired by a sketch. I found this sketch a bit of a struggle but eventually came up with a card made using the Mini Alphabet Dies.
Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” Real Red card – 5⅞” by 1⅜” Basic Black – 4” by 1½” x 4 Gold Foil – 5⅞” by ⅜” x 2 Scrap Basic White, Real Red & Gold Foil
The strip of Real Red card was embossed using the Softly Sophisticated Embossing Folder.
www.crafty-rootes.co.uk – A fun ‘hello’ card made for the Crafty Sketch Challenge Blog Hop and made using the Mini Alphabet Dies and bold colours
I glued the strips of Gold Foil either side of the embossed panel and then glued the whole piece to the front of the Thick Basic White card front.
www.crafty-rootes.co.uk – A fun ‘hello’ card made for the Crafty Sketch Challenge Blog Hop and made using the Mini Alphabet Dies and bold colours
Using the Stylish Shapes dies, I die cut 4 banners from the pieces of Basic Black card and set them to one ide.
www.crafty-rootes.co.uk – A fun ‘hello’ card made for the Crafty Sketch Challenge Blog Hop and made using the Mini Alphabet Dies and bold colours
The Mini Alphabet dies were use with, Basic White, Real Red and Gold Foil to cut out the word HELLO multiple times.
www.crafty-rootes.co.uk – A fun ‘hello’ card made for the Crafty Sketch Challenge Blog Hop and made using the Mini Alphabet Dies and bold colours
I arranged the letters and glued them to the Basic Black banners. These were then added to the card front on Black Dimensionals.
www.crafty-rootes.co.uk – A fun ‘hello’ card made for the Crafty Sketch Challenge Blog Hop and made using the Mini Alphabet Dies and bold colours
White Classic Matte Dots were added to the end of each banner to complete the card.
Please hop along to see what my crafty have made with this sketch.
If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x
Supplies used:
Loading Comments...
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.