A pretty snowflake Christmas card in non traditional colours using the Snowflake Wishes stamp set by Stampin' Up!

Snowflake Wishes for the Stampers Showcase Blog Hop

Posted on November 30, 2020November 24, 2020 by Mo Rootes

Welcome to the Stampers Showcase blog hop where our theme this month is Winter/Holidays. If you joined me from the lovely Rochelle Laird-Smith from Australia you are very welcome. You are currently visiting Mo Rootes in the UK.

I don’t know about you but I love Christmas crafting and had a hard job deciding on a stamp set to use. Eventually I settled on the gorgeous Snowflake Wishes stamp set.

To recreate the Snowflakes Wishes card you will need:

Thick Whisper White card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper right corner
Whisper White – 5⅜” by 3⅝” – Rounded upper right corner

I used a one of the fantastic new blending brushes to apply Seaside Spray ink to the Whisper White panel for some background interest. These blending brushes will be available from the 5th January 2021 in our January to June 2021 mini catalogue.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The largest snowflake was stamped using the same Seaside Spray ink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The middle-sized snowflake was stamped in Highland Heather ink and the small snowflake was stamped in Magenta Madness ink……… don’t you just love the pop of hot pink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

I stamped the teeny, tiny snowflakes in Seaside Spray. The sentiment from the Snowflake Wishes stamp set was stamped in Seaside Spray ink.

www.crafty-rootes.co.uk -The Snowflake Wishes stamp set used for a gorgeous Christmas card for the Stampers Showcase Blog Hop

The stamped layer was added to the Thick Whisper White card front with Dimensionals.

To complete the card, I added a scattering of Snowflake Sequins.

Isn’t it pretty?

Please continue to hop on to see what the lovely Rochelle Laird-Smith has to share with us today.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Beautiful Autumn

Posted on November 29, 2020November 24, 2020 by Mo Rootes

Today I am sharing a sweet wreath card in autumnal colours and made using the Beautiful Autumn Stamp set and Autumn Punch Pack.

To recreate the Beautiful Autumn card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” scored at 4⅛” – Rounded lower right corner
Basic Black – 5 ½” by 3 ¾” – Rounded lower right corner
In Good Taste dsp – 5⅜” by 3⅝” – Rounded lower right corner
Very Vanilla – 5⅜” by 3⅝” – Rounded lower right corner
Scrap Very Vanilla, Bumblebee, Shaded Spruce, Real Red & Cinnamon Cider

I drew a rough circle in pencil on the piece of In Good Taste designer series paper (dsp). The dsp panel was then adhered to the Basic Black layer using Multipurpose Liquid Adhesive. This panel was added to the Shaded Spruce card base using the same glue.

www.crafty-rootes.co.uk -A beautiful autumnal wreath made using the gorgeous Autumn stamp set and Autumn Punch Pack

I stamped the outer leaf images onto scrap cardstock – I used Bumblebee ink on Bumblebee card stock, Shaded Spruce ink onto Shaded Spruce card, Real Red ink onto Real Red card and Cinnamon Cider ink onto Cinnamon Cider card. The inner leaf images were stamped in the second generation of the same ink. The leaves were then punched out using the Autumn Punch Pack.

www.crafty-rootes.co.uk -A beautiful autumnal wreath made using the gorgeous Autumn stamp set and Autumn Punch Pack

The leaves were added to the rough circle using Mini Glue Dots and working around the wreath in a clockwise manner.

www.crafty-rootes.co.uk -A beautiful autumnal wreath made using the gorgeous Autumn stamp set and Autumn Punch Pack

The sentiment from the same Beautiful Autumn stamp set was stamped in Cinnamon Cider ink onto scrap Very Vanilla card. It was added over the wreath on Dimensionals.

www.crafty-rootes.co.uk -A beautiful autumnal wreath made using the gorgeous Autumn stamp set and Autumn Punch Pack

To complete the card, I added a sprinkling of Red Rhinestones. I hope you like it.

www.crafty-rootes.co.uk -A beautiful autumnal wreath made using the gorgeous Autumn stamp set and Autumn Punch Pack

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Snowflake Tree Ornament

Posted on November 28, 2020November 24, 2020 by Mo Rootes

Welcome to the November 2020 Ink, Stamp, Share Blog Hop. Our theme this month is ‘Christmas Tree Bauble’ and I have used the gorgeous So Many Snowflakes Dies to make my simple snowflake tree ornament. If you have started here of hopped over from my crafty friend Susan Simpson, you are very welcome.

To recreate the Snowflake Tree Ornament, you will need:

Magenta Madness card
Gold Foil card

Using the Stampin’ Cut & Emboss Machine I die cut 2 of the medium snowflakes from Gold Foil card and 4 smaller snowflakes from the Magenta Madness card.

www.crafty-rootes.co.uk -A pretty snowflake tree ornament made for the Ink, Stamp, Share Blog Hop using the So Many Snowflake Dies

I used a rolled up Mini Glue Dot to adhere one of the Gold Foil snowflakes to the Gold Hoop. The second Gold Foil snowflake was added to the back using Multipurpose Liquid Adhesive to stick the snowflakes together.

www.crafty-rootes.co.uk -A pretty snowflake tree ornament made for the Ink, Stamp, Share Blog Hop using the So Many Snowflake Dies

The Magenta Madness snowflakes were laid on my grid paper and sprayed with Champagne Shimmer Mist. This was made by pouring 70% alcohol into a Stampin’ Spritzer and adding a pea sized blob of Champagne Shimmer Paint before shaking well and spraying the snowflakes. This gives a lovely shimmer and the alcohol means it dries quickly.

www.crafty-rootes.co.uk -A pretty snowflake tree ornament made for the Ink, Stamp, Share Blog Hop using the So Many Snowflake Dies

I used rolled up Mini Glue Dots to adhere a pink snowflake either side of the larger gold snowflake. The remaining pink snowflakes were added to the back with the liquid glue.

www.crafty-rootes.co.uk -A pretty snowflake tree ornament made for the Ink, Stamp, Share Blog Hop using the So Many Snowflake Dies

Gold twine was then added to the gold hoop to hang the ornament and Gold Glitter Dios were added to each snowflake, front and back. Pretty but very simple. I just love these bright pink snowflakes. I hope you like them.

Please hop on to see what the lovely Jill Chapman has to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A lighthouse themed masculine card made using the High Tide stamp set by Stampin' Up!

Lighthouse at High Tide

Posted on November 27, 2020November 20, 2020 by Mo Rootes

Here is a lovely, masculine looking card featuring a lighthouse and made using the High Tide stamp set.

To recreate the Lighthouse card, you will need:

Sahara Sand card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper right corner
So Saffron – 4⅜” by ½”
Whisper White – 5” by 3¼” – Rounded upper right corner
Flowers For Every Season dsp- 4⅛” by 2½”
Whisper White – 5⅜” by 3⅝” – Rounded upper right corner

I began by adhering the dsp to the Sahara Sand card base using Multipurpose Liquid Adhesive.

The ‘ground’ image was stamped onto the smaller panel of Whisper White card with Sahara Sand ink. I added a little ‘water’ in Balmy Blue ink.

www.crafty-rootes.co.uk – Lighthouse at High Tide, a masculine all occasion card made using Stampin’ Up! products

Using the Stamparatus I lined up the ‘outer’ lighthouse image and stamped it in Night of Navy ink. The ‘inner’ lighthouse image was then stamped overtop in Pacific Point ink using the Stamparatus. The Stamparatus is fantastic for lining up these tricky images.

www.crafty-rootes.co.uk – Lighthouse at High Tide, a masculine all occasion card made using Stampin’ Up! products

The tufts of grass were added in Old Olive ink and the sun image from the Mountain Air stamp set was stamped in So Saffron ink.

www.crafty-rootes.co.uk – Lighthouse at High Tide, a masculine all occasion card made using Stampin’ Up! products

I punched a 1” circle using a punch and placed it over the stamped sun to act as a mask. Using one of the fabulous new Blending Brushes – coming in the new January – June 2021 catalogue – I applied Balmy Blue ink to the background. The mask was then removed and the seagulls from the Sailing Home stamp set were stamped in Basic Gray ink. I also stamped some seagulls at the top of the card front.

www.crafty-rootes.co.uk – Lighthouse at High Tide, a masculine all occasion card made using Stampin’ Up! products

The whole stamped panel was then embossed using my Stampin’ Cut & Emboss machine and the Tasteful Textiles Embossing Folder. Love the effect this gives. I added the strip of So Saffron card to the side of the embossed panel and added the whole piece to the card front on Dimensionals.

www.crafty-rootes.co.uk – Lighthouse at High Tide, a masculine all occasion card made using Stampin’ Up! products

Love this card – plain and simple. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies by Stampin' Up!

Thank you birds

Posted on November 24, 2020November 20, 2020 by Mo Rootes

Today I am sharing a pretty thank you birds card featuring birds and made using the Birds & Branches stamp set and Birds & More Dies.

To recreate the thank you Birds card, you will need:

Blushing Bride card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper left corner
Misty Moonlight – 5 ½” by 3 ¾” – Rounded upper left corner
Flowers For Every Season – 5⅜” by 3⅝” – Rounded upper left corner
Whisper White – 3¼” by 3¼”
Misty Moonlight – 3¼” by 3¼”
Whisper White – 5⅜” by 3⅝” – Rounded upper left corner
Scrap Whisper White

I added the piece of designer series paper (dsp) to the Misty Moonlight panel using Multipurpose Liquid Adhesive. Using the same glue, I adhered the panel to the Blushing Bride card base.

www.crafty-rootes.co.uk -A pretty bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies

Using the Stampin’ Cut & Emboss Machine I die cut a circle from the square of Whisper White and a slightly larger scalloped circle from the Misty Moonlight card. The branch from the Birds & Branches was stamped in Cinnamon Cider ink onto the top of the Whisper White circle and added the leaves in Just Jade ink.

www.crafty-rootes.co.uk -A pretty bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies

I stamped the birds onto scrap Whisper White, starting with the outer image in Misty Moonlight ink, followed by the inner layer with Blushing Bride ink.

www.crafty-rootes.co.uk -A pretty bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies

I inked up the nest with Cinnamon Cider ink and added some Early Espresso using an Early Espresso Marker and the ‘thumping technique’. You hold the marker loosely in your hand and tap the side of the maker onto the inked stamp, moving the stamp around to get a random look to the stamping. The image was then stamped onto the scrap Whisper White card.

www.crafty-rootes.co.uk -A pretty bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies

The nest and birds were added to the card front on Dimensionals, slightly off set. The overhanging side of the circle was then trimmed off using Scissors.

www.crafty-rootes.co.uk -A pretty bird themed thank you card made using the Birds & Branches stamp set and Birds & More dies

I stamped the sentiment from the Itty Bitty Greetings stamp set in Misty Moonlight ink onto scrap Whisper White card using the liquid glue. I added a trio of 2020 – 2022 In Color Enamel Dots.

I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A rose themed thank you card made using the Inspirin Iris and Ornate Thanks stamp sets by Stampin' Up!

Rosy Thank You

Posted on November 22, 2020November 18, 2020 by Mo Rootes

Such a pretty rosy thank you card made using the Inspiring Iris stamp set and the Ornate Thanks stamp set.

To recreate the Rosy Thank You card you will need:

Thick Whisper White card base – 8¼” by 5⅞” scored at 4⅛” – Rounded upper left corner
Flowers For Every Season dsp – 5⅝” by 4” – Rounded upper left corner
Whisper White – 5⅜” by 3⅝” – Rounded upper left corner
Flowers For Every Season dsp – 3 ¾” by 1”
Whisper White – 3 ¾” by ¾”

Using a strip of Post It Note I masked off an section of the Whisper White panel, about ⅔ up from the bottom.

www.crafty-rootes.co.uk -The gorgeous Inspiring Iris stamp set by Stampin’ Up! used for a Rosy Thank You card

Using Basic Gray ink I stamped the outline image of the rose randomly above and below the Post It strip.

www.crafty-rootes.co.uk -The gorgeous Inspiring Iris stamp set by Stampin’ Up! used for a Rosy Thank You card

I used Just Jade to ink up the in-fill stamp for the leaves and stems and Magenta Madness for the flower in-fill image. I just love the zingy, vibrancy of the pink. The flower centres were added in Bumblebee ink. The stamped panel was then mounted onto the larger piece of Flowers Fr Every Season dsp using Multipurpose Liquid Adhesive. The whole piece was added to the Thick Whisper White card base using the same glue. I love the watercolour effect of these images, so pretty.

www.crafty-rootes.co.uk -The gorgeous Inspiring Iris stamp set by Stampin’ Up! used for a Rosy Thank You card

The sentiment from the Ornate Thanks stamp set was stamped in Magenta Madness ink onto the ¾” strip of Whisper White card. This was then added to the strip of dsp using the same liquid glue.

www.crafty-rootes.co.uk -The gorgeous Inspiring Iris stamp set by Stampin’ Up! used for a Rosy Thank You card

The sentiment strip was then adhered to the card front on Dimensionals and a scattering of 2020-2022 In Color Enamel Dots added to complete the card.

www.crafty-rootes.co.uk -The gorgeous Inspiring Iris stamp set by Stampin’ Up! used for a Rosy Thank You card

I love the Magenta Madness and Just Jade colour combination, so fresh and cheerful. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty floral card made using the Tasteful Texile folder Ornate Style stamp set by Stampin' Up!

Ornate Textile

Posted on November 20, 2020November 12, 2020 by Mo Rootes

Here is a pretty ornate textile card made using the Ornate Style stamp set and the Tasteful Textiles Embossing Folder.

To recreate the Ornate Textile card, you will need:

Mint Macaron –- 8¼” by 5⅞” scored at 4⅛”
Whisper White – 5¼” by 3¾”
Whisper White – 5” by 3½”
Whisper White – 5⅜” by 3⅝” – for the inside
Whisper White ⅜” strip
Whisper White scrap

Using Basic Gray ink I stamped the beautiful floral image onto the smallest panel of Whisper White and coloured it in using the following Blends Markers – Mint Macaron, Flirty Flamingo, Purple Posy, Soft Suede & Daffodil Delight.

www.crafty-rootes.co.uk -A beautiful floralornate textile card made using the Ornate Style stamp set and Tasteful Texile embossing folder

I used my Stampin’ Cut & Emboss Machine and the Tasteful Textiles Embossing Folder to emboss the stamped panel. Such a cool effect.

www.crafty-rootes.co.uk -A beautiful floralornate textile card made using the Ornate Style stamp set and Tasteful Texile embossing folder

Using my Paper Trimmer I cut the embossed panel into 4 pieces, each 2½” by 1¾”.

www.crafty-rootes.co.uk -A beautiful floralornate textile card made using the Ornate Style stamp set and Tasteful Texile embossing folder

I added Dimensionals to the back of each of the 4 pieces and mounted them to the 5¼” by 3¾” Whisper White panel. This panel was then added to the Mint Macaron card base using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk -A beautiful floralornate textile card made using the Ornate Style stamp set and Tasteful Texile embossing folder

The sentiment from the Itty Bitty Birthday stamp set was stamped in Mint Macaron ink onto the strip of Whisper White and trimmed down with scissors.

www.crafty-rootes.co.uk -A beautiful floralornate textile card made using the Ornate Style stamp set and Tasteful Texile embossing folder

I cat a stitched scalloped border using the Stitched So Sweetly dies, cut it down and glued it to the back of the sentiment. The sentiment was added to the card front with liquid glue. To complete the card I added a trio of Holiday Rhinestones.

Such a pretty card.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Coming Home stamp set by Stampin' Up! used to make a Christmas cards featuring a row of trees

Row of Christmas Trees

Posted on November 17, 2020November 12, 2020 by Mo Rootes

This Christmas card features a beautiful row of Christmas Trees made using the Coming Home stamp set.

To recreate the Row of Christmas Trees card you will need:

Shaded Spruce card base –- 8¼” by 5⅞” scored at 4⅛”
Whisper White – 5⅞” by 2¼”
Real Red – 5⅞” by 1”
Whisper White – 5⅜” by 3⅝”
Scrap Whisper White

I stamped the large Christmas tree from the Coming Home stamp set across the strip of Whisper White card using Early Espresso ink.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

The trees were coloured in using the following Blends Markers – Shaded Spruce, Soft Suede and Crumb Cake.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

A decorative scalloped border was cut from the strip of Real Red card using the Peony Dies. This was then adhered to the bottom of the stamped strip using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

I stamped the tiny wreath image from the Coming Home stamp set in Shaded Spruce ink randomly across the bottom half of the Shaded Spruce card front to give some tone on tone texture and added the stamped panel over-top using the same liquid glue.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

The sentiment from the Itty Bitty Christmas stamp set was stamped on scrap Whisper White using Shaded Spruce ink before being adhered to the card front with the liquid glue.

www.crafty-rootes.co.uk -A row of trees Christmas card made using the Coming Home stamp set by Stampin’ Up!

I added a star to the top of the central tree and some Red Rhinestones to the other trees to complete the card.

I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A Christmas Card made using the Curvy Christmas stamp set and the Stitched Stars dies and Curvy dies by Stampin' Up!

Curvy Stars Christmas card

Posted on November 15, 2020November 9, 2020 by Mo Rootes

Today I am sharing a curvy stars Christmas card made using a lovely new super bundle. The bundle includes the Quite Curvy stamp set and Curvy dies which will be available in the January to June 2021 mini catalogue and an add on stamp set called Curvy Christmas stamp set plus the Classic Christmas designer series paper, these will only be available until the end of December or while stocks last and they are GORGEOUS.

To recreate the curvy stars Christmas card, you will need:

Thick Whisper White card base –- 8¼” by 5⅞” scored at 4⅛”
Classic Christmas dsp – 5⅞” by 3”
Scrap Misty Moonlight, Whisper White & Gold Foil

Taking the gorgeous dotty edge die from the Curvy die set and my Stampin’ Cut & Emboss Machine I cut off part of the card front. Doesn’t it look cool.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I stamped the spray of stars, love this image, along the cut edge of the card front in Misty Moonlight ink. I also stamped the row of stars onto the inside panel in the same ink.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I used the same dotty die to cut the same shape into the dsp panel and used my Paper Trimmer to trim the panel down to size before adhering it to the card front with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

Using the Stitched Star dies I cut 3 stars from scrap Misty Moonlight, Whisper White and Gold Foil card.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

The stars were added to the card front using either liquid glue or Dimensionals. The sentiment from the Christmas Gleaming stamp set was stamped in Misty Moonlight ink onto scrap Whisper White card and fussy cut using Scissors. It was added to the card front with liquid glue.

www.crafty-rootes.co.uk – A pretty curvy stars Christmas Card made using the Curvy Christmas stamp set and Curvy dies

I used a trio of 2020-2021 In Color Enamel Dots to complete the card. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Thankful For You – Joy of Sets

Posted on November 14, 2020November 14, 2020 by Mo Rootes

Thank you for joining me today for the Joy of Sets blog hop where our theme is ‘Thankful for You’. If you hopped over from the talented Alejandra Gomez, I am sure you loved her project. You are currently visiting Mo Rootes in the UK. I hope you like my project today.

To recreate the Thankful for You card, you will need:

Thick Whisper White card base –- 8¼” by 5⅞” scored at 4⅛” – Rounded upper right corner
Bumble bee – 5½” by 3¾” – Rounded upper right corner
Dandy Garden dsp – 5⅜” by 3⅝” – Rounded upper right corner
Bumblebee – 4⅞” by 3⅛” – Rounded upper right corner
Whisper White – 4⅝” by 2⅞” – Rounded upper right corner
Scrap Misty Moonlight

The piece of Dandy Garden dsp was glued to the larger layer of Bumblebee card using liquid adhesive. I love the yellow and blue together, don’t you? This layer was then glued onto the Thick Whisper White card base using the same liquid adhesive.

A pretty floral thankful for you card made for the Joy of Sets blog hop

www.crafty-rootes.co.uk -Dragonfly Garden stamp set used to make a Thankful for You card for the Joy of Sets Blog Hop!

I stamped the gorgeous, delicate group of flowers from the Dragonfly Garden stamp set using Basic Gray ink onto the Whisper White panel.

www.crafty-rootes.co.uk -Dragonfly Garden stamp set used to make a Thankful for You card for the Joy of Sets Blog Hop!

The flowers and leaves were then coloured in using the following Blends – So Saffron, Just Jade, Magenta Madness, Pool Party and Soft Suede. The stamped layer was glued to the smaller Bumblebee layer with the liquid adhesive.

www.crafty-rootes.co.uk -Dragonfly Garden stamp set used to make a Thankful for You card for the Joy of Sets Blog Hop!

I wrapped a length of Pool Party Sheer Ribbon around the panel and secured it on the back with Sellotape. The whole panel was added to the card front on Dimensionals.

www.crafty-rootes.co.uk -Dragonfly Garden stamp set used to make a Thankful for You card for the Joy of Sets Blog Hop!

I rubbed my embossing body over a scrap piece of Misty Moonlight card and the sentiment from the Country Home stamp set was stamped in Versamark ink. I covered the Versamark with White Embossing Powder and Heat Set it using my Heat Tool.

www.crafty-rootes.co.uk -Dragonfly Garden stamp set used to make a Thankful for You card for the Joy of Sets Blog Hop!

Using my sharp scissors, I fussy cut the sentiment. I only wanted part of the sentiment for this card and this is a great way to get more from the sentiments you have. The sentiment was added over the ribbon with liquid glue and a bow of the same ribbon added to the side. I added a trio of 2020-2022 In Color Enamel Dots around the flowers. To complete the card, I fussy cut a couple of tiny dragonflies from the Dandy Garden dsp and added them to the card front with a spot of glue.

I hope you like it.

Please hop on to see what the lovely Angie McKenzie. has to share with us today.