A vintage ranunculus card made for the Kylie Bertucci Demo Blog Hop using the Ranunculus Romance stamp set by Stampin' Up!

Vintage Ranunculus card for the Kylie Bertucci Demo Blog Hop

Posted on June 13, 2022June 5, 2022 by Mo Rootes

Hello and thank you for joining me for the Kylie Bertucci Demo Blog Hop where we are share ideas for customer thank you cards. My vintage ranunculus card is made using a rustic colour palette.

Colours used in this project are:

To recreate the vintage ranunculus thank you card, you will need:

Crumb Cake card base – 8¼” by 5⅞” scored and folded at 4⅛”
Merry Merlot card – 5¼” by 3½”
Crumb Cake card – 5” by 3¼”
Very Vanilla card – 5½” by 3¾”
Vellum card – 3½” by 3½”
Scrap Very Vanilla card

Using Versamark ink, I randomly stamped the scripty image and the spray of flowers image onto the panel of Crumb Cake card. I covered the ink with Gold Embossing Powder and heat set it using my Heat Tool. The embossed panel was then added to the Merry Merlot layer with Multipurpose Liquid Adhesive. I used the same ink to glue the panel to the Crumb Cake card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I mounted the ranunculus flower image onto one of the Stamparatus plates. I inked the image up using the Garden Green and Merry Merlot Stamp ‘n Write Markers. I repeated this a couple of times to get the depth of colour I wanted.

The image was then die cut using the Ranunculus Dies.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I die cut a stitched circle from the Stylish Shapes Dies and trimmed off the right-hand side. The flower image was added to the Vellum using dabs of liquid glue. The Vellum piece was then added on Dimensionals, hidden behind the flower to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

The sentiment was stamped in Merry Merlot ink onto scrap Very Vanilla card and die cut using the Sending Dies. It was then added to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

I used the Cherry Cobbler Blends Pens to colour in some Basic Pearls before adding them to the card front.

www.crafty-rootes.co.uk – The Ranunculus Romance stamp set used to make a vintage ranunculus card for the Kylie Bertucci Demo Blog Hop

This card is so out of my comfort zone, but I really like it.

I am looking forward to seeing what my fellow demos have to share with us today.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Wisteria Wishes stap set and Sun Prints Designer Series Paper by Stampin' Up! used to make a pretty note of thanks card

Striped Wisteria card for the Ink. Stamp. Share. Blog Hop

Posted on June 11, 2022June 3, 2022 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on recently. I am currently putting together a class featuring the Wisteria Wishes stamp set and, in addition to the 3 cards we will make in class I try to have other examples made using the set to demonstrate versatility. Today I am sharing one of my extra cards which I have called striped wisteria.

The colours used in this project are:

Basic White

Garden Green

Orchid Oasis

To recreate the striped wisteria card, you will need:

Orchid Oasis card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Sun Prints dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 5” by 3½”
Garden Green card – 1½” by ¾” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Basic White strip

I began by die cutting a scalloped rectangle using the Scalloped Contour Dies.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

The leafy branch was stamped in Garden Green ink towards the top of the scalloped rectangle and I added the trio of wisteria flowers using Orchid Oasis ink.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Okay, time for a confession, this was going to be a portrait card but………… I cut the striped dsp going in the wrong direction! Don’t you just hate it when you do something like that, so rather than just waste the dsp I turned the card around and transformed it into a landscape card. The dsp panel was glued to the larger Basic White layer using Multipurpose Liquid Adhesive and added to the Orchid Oasis card front using the same glue.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Using my Paper Trimmer, I trimmed off the top and bottom of my decorated scalloped rectangle and added it to the card front on Dimensionals. I actually quite liked how it looked.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

The sentiment from the Sending Smiles stamp set was stamped in Garden Green ink onto the strip of scrap Basic White card and then die cut using the Sending Dies. I tucked the strip of Garden Green card under the stamped panel and added the sentiment over the top.

www.crafty-rootes.co.uk – A pretty note of thanks card made using the Wisteria Wishes stamp set and the Sun Prints designer Series Paper

Using a Mossy Meadow Blends Pen I coloured in a trio of Basic Rhinestones and added them to complete the card.

I hop you like it.

Please continue around the hop to share lots of inspiration.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A beautiful saffron roses card made using the Abigail Rose designer Series Paper by Stampin' Up! for the Stamp 'n Hop Blog Hop

Saffron Roses for the Stamp ‘n Hop Blog Hop

Posted on June 11, 2022June 11, 2022 by Mo Rootes

Hello and welcome to the Stamp ‘n Hop Blog Hop where we are sharing projects made using some of the gorgeous designer Series Paper.

The colours used in this project are:

To recreate the saffron roses card, you will need:

Thick Very Vanilla card base – 8¼” by 5⅞” scored and folded at 4⅛”
Fresh Freesia card – 5⅜” by 3⅝”
Abigail Rose dsp – 5¼” by 3½”
Smoky Slate card – 2” by 2”
Vellum – 2“by 2”
Basic Gray card – 2” by 2”

Having cut the piece of Abigail Rose dsp, I used the following Blend Pens to colour in the flowers and leaves: So Saffron, Fresh Freesia & Soft Sea Foam.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The coloured panel of dsp was then glued to the Fresh Freesia panel using Multipurpose Liquid Adhesive. The whole panel was added to the Thick Very Vanilla card base using the same glue.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

The sentiment from the Charming Sentiments stamp set was stamped onto Basic Gray card in Versamark ink, covered in Gold Embossing Powder and heat set using a Heat Tool. I die cut the sentiment using the Sentiment Silhouette Dies.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

Using the beautiful Shapes Dies I cut circles from the square of Smoky Slate card and Vellum. I added the sentiment to the Vellum circle with Seal +. This was then added onto the Smoky Slate Circle using the same adhesive.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

I added a strip of Seal + to the card front and used it to secure a loop of Gold Shimmer Ribbon before adding the Sentiment over the top. A scattering of Basic Rhinestones completed the card.

www.crafty-rootes.co.uk – The gorgeous Abigail Rose designer Series Paper used to make a saffron roses card for the Stamp ‘n Hop Blog Hop where the theme is dsp

So pretty. Please hop on to share all the lovely projects prepared by my fellow demonstrators. Next up is the lovely Vicky Wright from Australia

June Blog Roll

Gez Carpenter –UK https://www.nigezza.co.uk/2022/06/stamp-n-hop-june-blog-hop-dsp.html

Linda Moore – US https://moorefunstamping.com/june-stamp-n-hop—designer-series-paper

Karen Egan – UK https://craftykarendesigns.blogspot.com/2022/06/hues-of-happiness-stamp-n-hop-blog-hop.html

Jo Blackman – UK https://www.joblackman.com/2022/06/stamp-n-hop-blog-hop-dsp.html

Mo Rootes – UK http://www.crafty-rootes.com/?p=9928

Vicky wright – Australia https://vicky-wright.com/?p=26370

Robbie Susan Chandler https://www.robbiesusanscardsandcrafts.com/2022/06/hues-of-happiness-designer-series-paper.html

Terry Montgomery https://terryficcards.blogspot.com/2022/06/stamp-n-hop-june-blog-hop-designer.html

Kristie Lyn https://mypaperlife.com/2022/06/10/stamp-n-hop-featuring-dsp

Annette Elias https://dekijkkast.blogspot.com/2022/06/frisse-vintagekaart-stamp-n-hop-bloghop.html

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Lacy Flowers card

Posted on June 10, 2022May 30, 2022 by Mo Rootes

I have been playing with texture today and have a lacy flowers card to share with you.

Colours used in this project are:

To recreate the lacy flowers card, you will need:

Thick Basic White card – 8¼” by 5⅞” scored and folded at 4⅛”
Basic White card – 5½” by 3¾”
Basic White card – 4¼” by 3”
Basic White card – 3¼” by ¾”
Hues of Happiness dsp

I ran the larger panel of Basic White through the Cut & Emboss Machine with the Fern Embossing Folder and glued it to the Thick Basic White card front.

www.crafty-rootes.co.uk – The Hues of Happiness designer series paper and Blossoming Happiness Dies used to make a pretty lacy flowers card

The smaller panel of Basic White card was die cut using the lacy die from the Blossoming Happiness Dies. This die is stunning, it partially cuts and partly embosses, so pretty. This piece was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Hues of Happiness designer series paper and Blossoming Happiness Dies used to make a pretty lacy flowers card

I die cut the flowers from the Hues of Happiness dsp, actually these are all the partial flowers from around the edge. These were arranged on top of the lacy layer.

www.crafty-rootes.co.uk – The Hues of Happiness designer series paper and Blossoming Happiness Dies used to make a pretty lacy flowers card

The sentiment from the Happiness Abounds stamp set was stamped on the strip of Basic White card and die cut using the Beautiful Shapes Dies. I added it on Dimensionals to hide the messy cut off flowers.

www.crafty-rootes.co.uk – The Hues of Happiness designer series paper and Blossoming Happiness Dies used to make a pretty lacy flowers card

Using Daffodil Delight and Polished Pink Blends, I coloured in 5 of the Basic Pearls and added them to the card front along with a double White Baker’s Twine Bow.

www.crafty-rootes.co.uk – The Hues of Happiness designer series paper and Blossoming Happiness Dies used to make a pretty lacy flowers card

Gorgeous card, I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Stampin' Up!'s Simply Fabulous stamp set and Fern 3D Embossing Folder used to make a pretty fabulous fern floral card

Fabulous Fern card

Posted on June 8, 2022June 3, 2022 by Mo Rootes

This card was made for one of my lovely team members using the Simply Fabulous stamp set. Every month team members are rewarded for sales and recruiting with a voucher and this team mate has chosen to trade hers in for the Fern 3D Embossing Folder. This Fabulous Fern card was made especially for her.

Colours used in this project are:

To recreate the fabulous fern card, you will need:

Polished Pink card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Granny Apple Green – 5⅛” by 3⅜” – rounded upper left corner
Basic White card – 5” by 3¼” – rounded upper left corner
Granny Apple Green card – 3¼” by ⅞”
Basic White card – 3 ¼” by ¾”
Basic White card – 5½” by 3¾” – rounded upper left corner – for the inside

Firstly, I chose my sentiment from the Simply Fabulous stamp set. I worked out what size strip I needed to stamp it on and then used a ruler to draw faint lines across the 5” by 3¼” panel of Basic White card where I planned to place the sentiment.

www.crafty-rootes.co.uk – A lovely fabulous fern card made using the Simply Fabulous stamp set and Fern 3D Embossing Folder by Stampin’ Up!

I stamped the leafy images from the Simply Fabulous stamp set in Granny Apple Green ink.

The flowers were then added in Polished Pink, Flirty Flamingo and So Saffron. The flower centres were stamped in Soft Suede ink. I rubbed out the pencil lines.

www.crafty-rootes.co.uk – A lovely fabulous fern card made using the Simply Fabulous stamp set and Fern 3D Embossing Folder by Stampin’ Up!

The whole panel was then run through the Stampin’ Cut & Emboss Machine with the gorgeous Fern 3D Embossing Folder. This gives the stamped panel such great texture. The whole panel was then glued to the Granny Apple Green layer.

www.crafty-rootes.co.uk – A lovely fabulous fern card made using the Simply Fabulous stamp set and Fern 3D Embossing Folder by Stampin’ Up!

The larger flower was stamped in the upper left and lower right corners of the Polished Pink card base and added the decorated panel using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A lovely fabulous fern card made using the Simply Fabulous stamp set and Fern 3D Embossing Folder by Stampin’ Up!

The sentiment was stamped on the strip of Basic White card in Granny Apple Green ink. The Granny Apple Green strip was added to the back and the whole strip added to the card front on Dimensionals. A trio of 2021 – 2023 In Color Opal Rounds completed the card.

www.crafty-rootes.co.uk – A lovely fabulous fern card made using the Simply Fabulous stamp set and Fern 3D Embossing Folder by Stampin’ Up!

I love it and I hope my friend and team mate likes it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A card made for the Crafty Challenge Blog Hop using the gorgeous new 2022 - 2024 In-Colors and the Sending Smiles stamp set by Stampin' Up!

In Color Smiles card for the Crafty Challenge Blog Hop

Posted on May 30, 2022May 20, 2022 by Mo Rootes

Hello and welcome to the Crafty Challenge Blog Hop where we are showcasing the new 2022 – 2024 In-colors. I have made a pretty in-color smiles card using the Sending Smiles stamp set,

Colours used in this project are:

To Recreate the in-color smiles card, you will need:

Sweet Sorbet card base – 8¼” by 5⅞” scored and folded at 4⅛”
Starry Sky card – 5⅝” by 3⅞”
Basic White card – 5½” by 3¾” x 2 – one for the inside
Basic White card – 3¾” by 1½”

Using my Grid Paper and a ruler I measured down 1¼” and using a pencil drew a line across one of the larger panels of Basic White card. I drew another line about 1 ½” lower. This helped me to arrange my stamping.

www.crafty-rootes.co.uk – The Sending Smiles stamp set and the new 2022 – 2024 In-Colors used to make a pretty card for the Crafty Challenge Blog

I began by stamping the leafy sprig in Parakeet Party above and below the lines. The Sweet Sorbet flower was stamped next.

www.crafty-rootes.co.uk – The Sending Smiles stamp set and the new 2022 – 2024 In-Colors used to make a pretty card for the Crafty Challenge Blog

The smaller flower in Tahitian Tide ink was used to fill in some of the gaps and the smaller plume added in Orchid Oasis.

www.crafty-rootes.co.uk – The Sending Smiles stamp set and the new 2022 – 2024 In-Colors used to make a pretty card for the Crafty Challenge Blog

I used Starry Sky ink to add centres to all the flowers. The decorated panel was then glued to the Starry Sky layer using Multipurpose Liquid Adhesive and the whole panel was added to the Sweet Sorbet card base using the same glue. I used a clean rubber to erase the pencil lines.

www.crafty-rootes.co.uk – The Sending Smiles stamp set and the new 2022 – 2024 In-Colors used to make a pretty card for the Crafty Challenge Blog

The larger part of the sentiment was stamped in Starry Sky ink and the smaller sentiment added using Sweet Sorbet………I messed this up and ended up re-stamping it onto scarp Basic white and die cutting it out using one of the labels from the co-ordinating Sending Dies. I added this over the badly stamped words using liquid adhesive. This piece was then mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The Sending Smiles stamp set and the new 2022 – 2024 In-Colors used to make a pretty card for the Crafty Challenge Blog

A trio of 2022 – 2024 In Color Dots completed the card. I hope you like it

Please continue around the hop as my stamping friends have so many ideas to share today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Lovely You stamp set by Stampin' Up! used to make a pretty floral card for the Ink & Inspiration Blog Hop

Lovely You card for the Ink & Inspirations Blog Hop

Posted on May 26, 2022May 15, 2022 by Mo Rootes

Hello and welcome to the Ink & Inspirations Blog Hop where we have a picture to work from. I have chosen to use the colours of the picture for my lovely you card.

Colours used in this project are:

To recreate the lovely you card, you will need:

Pear Pizzazz card base – 8¼” by 5⅝” scored at 4⅛”
Pacific Point card – 5¼” by 3½”
Basic White card – 5⅛” by 3⅜”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾”
Scrap Pacific Point

I die cut a stitched circle using the Stylish Shapes Dies, placed it onto the 5⅛” by 3⅜” panel of Basic White and drew around it with a pencil. This helped me to plan where to stamp my images.

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

The bushy leaves were stamped in Soft Succulent around the pencilled circle. I added the trio of leaves in Pear Pizzazz ink.

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

Next, I inked up the flower and stem using Pacific Point for the flower and Cajun Craze for the stem and leaves. These were added around the circle. Next, I added the thin sprig in Evening Evergreen ink.

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

Finally, I added the single flower in 1^st & 2^nd generation Pacific Point ink. I rubbed the pencil line out with a rubber. The whole panel was added to the Pacific Point panel with Multipurpose Liquid Adhesive and I used the same glue to adhere the panel to the Pear Pizzazz card front.

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

The sentiment from the Charming Sentiments stamp set was stamped in Cajun Craze ink onto the die cut stitched circle. One side of the circle was trimmed down and the circle added on Dimensionals.

www.crafty-rootes.co.uk – A lovely card made using the Lovely You stamp set for the Ink & Inspirations Blog Hop

A small butterfly was die cut from scrap Pacific Point card using the Daffodil Dies. The butterfly was added to the card front along with a trio of Basic Rhinestones to complete the card.

Not a colour combo I would have chosen but I really like how the card has turned out. I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Floral Hello card

Posted on May 24, 2022May 14, 2022 by Mo Rootes

I have been having fun with the Hues of Happiness designer Series Paper today and have made a pretty floral hello card.

Colours used in this project are:

To recreate the floral hello card, you will need:

Night of Navy card base – 8¼” by 5⅝” scored at 4⅛” – rounded upper left corner
Flirty Flamingo card – 5¼” by 3½” – rounded upper left corner
Hues of Happiness dsp – 5⅛” by 3⅜” – rounded upper left corner
Basic White card – 1⅝” by 1¼”
Melon Mambo – 3¼” by ¾”
Basic White card – 5½” by 3¾” – rounded upper left corner for the inside

Using Multipurpose Liquid Adhesive, I glued the panel of Hues of Happiness dsp to the Flirty Flamingo layer. This was mounted onto the Night of Navy card front.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

I stamped the HELLO form the Biggest Wish stamp set in Night of Navy ink onto the 1⅝” by 1¼” Basic White panel.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

To the card front I glued the Basic White strip and the Melon Mambo strip, with the ends flagged.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

The sentiment was then added over the top on Dimensionals.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

A trio of Iridescent Rhinestones completed the card.

www.crafty-rootes.co.uk – A floral hello card made using the Hues of Happiness dsp by Stampin’ Up!

I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Wisteria Wishes stamp set by Stampin' Up! used with 2 of the 2022 - 2024 in colors to create a striking card

Sweet Delphinium card

Posted on May 22, 2022May 16, 2022 by Mo Rootes

Here is a pretty sweet delphinium card made using the gorgeous Wisteria Wishes stamp set.

The colours used in this project are:

Basic White

Sweet Sorbet

Parakeet Party

To recreate the sweet delphinium card, you will need:

Parakeet Party card base – 8¼” by 5⅞” scored and folded at 4⅛”
Basic White card – 4⅛” by 2”
Strawberry Sorbet card – 4⅛” by ½” x 2
Basic White card – 5½” by 3¾”
Scrap Basic White

Using the Parakeet Party ink, I stamped the trio of stalks and leaves and the blooms across the front of the Parakeet Party card front.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

I stamped the stalks and leaf image again onto the small panel of Basic White card.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The blooms were stamped in Sweet Sorbet ink.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The Sweet Sorbet strips were added either side of the stamped panel. I wrapped a length of Sweet Sorbet Metallic Woven Ribbon around the panel.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The sentiment from the Sending Smiles stamp set was stamped in Sweet Sorbet ink onto scrap Basic White card and die cut using the Sending Des before being added to the card front.

www.crafty-rootes.co.uk – A sweet delphinium card made using the Wisteria Wishes stamp set by Stampin’ Up!

The card was finished with a bow and a trio of 2022 – 2024 In Color Matte Dots.

Such a pretty card, I hope you like it.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Hues of Happiness designer Series Paper by Stampin' Up! used to make a pretty rosie thank you card

Rosie Thanks card

Posted on May 20, 2022May 13, 2022 by Mo Rootes

I have been playing with the gorgeous Hues of Happiness dsp today, I can’t get enough of this paper. I have made a pretty rosie thanks card to share.

Colours used in this project are:

To recreate the rosie thanks card, you will need:

Fresh Freesia card base – 8¼” by 5⅝” scored at 4⅛”
Basic White card – 5½” by 3¾” x 2, one for the inside
Hues of Happiness dsp – 5⅜” by 3⅝”
Basic White card – 2 ½” by 2½”
Basic White ¼” strip

The panel of dsp was added to one of the larger layers of Basic White card using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

I used the same glue to adhere the panel to the Fresh Freesia card base.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

Using the Stylish Shapes Dies, I die cut a stitched rectangle and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

A purple rose was die cut from the pretty dsp along with two leaves. I used my Bone Folder to curve the flower and leaves and added the flower to the stitched square on a Dimensional. The flower was tucked under and held in place with a dab of liquid glue.

www.crafty-rootes.co.uk – A rosie thank you card made using the Hues of Happiness designer series paper by Stampin’ Up!

The sentiment from the Sending Smiles stamp set was stamped on the strip of Basic White card. I trimmed it down using scissors and added it to the card with glue and Dimensionals.