Tropical Chic stamp set and Tropical dies used for a special double Z fold card

Tropical Chic Double Z Fold Card

Today I am sharing a double Z fold card made for another of my oldest and loveliest friends. We have been friends for over 40 years!

Making this gorgeous card

I started by cutting a piece of Thick Whisper White cardstock 11” by 5½” and another piece 9¼” by 4¼”. Using my Simply Scored Scoring Tool I scored both pieces at 2¾” and 5½” on the long sides. I chose 2 of the gorgeous pieces of the Tropical Escape dsp. I cut 1 panel at 5¼” by 5¼” and 2 panels at 5¼” by 2½” and adhered the pieces to the larger Thick Whisper White card base. This dsp is stunning and I love the green and pink colour combination.

Tropical Chic stamp set and Tropical dies used for a special double Z fold card

www.crafty-rootes.com – Tropical Chic for a special Double Z fold card

I took the detailed square die from the Tropical Thinlit dies and using my Big Shot I die cut it for Soft Sea Foam cardstock. I then cut a square of Granny Apple Green cardstock 2 ¾” by 2 ¾” and added it behind the Soft Sea Foam piece with Multipurpose Liquid Adhesive. This piece was then added to the front of the smaller Thick Whisper White panel with Multipurpose Liquid Adhesive.

Tropical Chic stamp set and Tropical dies used for a special double Z fold card

www.crafty-rootes.com – Tropical Chic for a special Double Z fold card

I cut 2 panels of Granny Apple Green cardstock 2 ¾” by 2 ¾” and round the top corners with the Detailed Trio Punch. I cut 2 panels of Whisper White cardstock 2 ½” by 2 ½”, round the upper corners as before then stamped one of the leaves from the Tropical Chic stamp set in Granny Apple Green ink in the upper right or lower left corner. These panels were then adhered to the Granny Apple Green layers and glued the Thick Whisper White piece.

Tropical Chic stamp set and Tropical dies used for a special double Z fold card

www.crafty-rootes.com – Tropical Chic for a special Double Z fold card

I stamped the flowers in 1st and 2nd generation Flirty Flamingo ink onto a scrap of Whisper White cardstock and die cut them out with my Big Shot and the Tropical Thinlits. The flowers were then added with either Multipurpose Liquid Adhesive or Stampin’ Dimensionals to the 3 front panels of the card. I also cut an extra leaf from Granny Apple Green cardstock and added it to the die cut panel.

Tropical Chic stamp set and Tropical dies used for a special double Z fold card

www.crafty-rootes.com – Tropical Chic for a special Double Z fold card

The sentiment from the Dragonfly Dreams stamp set was stamped in Granny Apple Green ink. The smaller panel was then added to the larger panel with Multipurpose Liquid Adhesive. I love this style of card. I added a scattering of Love What You Do Artisan Pearls to the card front.

Tropical Chic stamp set and Tropical dies used for a special double Z fold card

www.crafty-rootes.com – Tropical Chic for a special Double Z fold card

I used my Envelope Punch Board and some retired Flirty Flamingo dsp to make an envelope for the card.

I am really happy with this card and I really hope Lyndsay likes it.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies Used

 

Special Birthday card using Birthday Blooms and Number of Years by Stampin' Up!

Number of Years and Birthday Blooms for a Special Birthday

Today I am sharing a card I made using the Birthday Blooms stamp set, the Number of Years Stamp set and the Large Numbers dies. These are all retiring from the Annual Catalogue on the 31st of May and I will really miss them. I made this card for my Mum who is celebrating her special birthday in a couple of days.

Making the card

I began with a piece of Thick Whisper White cardstock 11” by 5½” which I scored on the long side at 2¾” by 5½” using my Simply Scored Scoring Tool. I took a 2nd piece of Thick Whisper White cardstock 9¼” by 4¼” and scored it at 2¾” and 5½” on the long side. I then folded and burnished all of the score lines.

Special Birthday card using Birthday Blooms and Number of Years by Stampin' Up!

www.crafty-rootes.com – Birthday Blooms and Number of Years by Stampin’ Up!

I chose 2 patterns from the Tutti-Frutti dsp stack and cut 2 panels at 5⅜” by 2⅝” and one panel at 5⅝” by 5⅝”. I then adhered these to the larger Thick Whisper White panel leaving a tiny border round each panel.

I then cut panels in Lemon Lime Twist cardstockone at 4” by 3½” and two at 4” by 2⅝” and Whisper White panelsone at 3⅞” by 3⅜” and two at 3⅞” by 2⅜”.

Special Birthday card using Birthday Blooms and Number of Years by Stampin' Up!

www.crafty-rootes.com – Birthday Blooms and Number of Years by Stampin’ Up!

On the larger Whisper White panel I stamped the large rose image from the Birthday Blooms stamp set in the lower left hand corner using Momento Tuxedo Black ink. I stamped the smaller rose image in the bottom left or top right on the remaining Whisper White panels. I coloured the flowers in with the Light & Dark Daffodil Delight and the Light and Dark Old Olive Blends Pens.

I stamped the word ‘birthday’ using Momento Tuxedo Black ink on the on the panel with the small bloom in the lower left hand corner. I took some scrap Lemon Lime Twist cardstock and die cut each of the numbers 3 times using my Big Shot and glued them together to give added dimension. I then glued them to the largest stamped Whisper White panel. The word ‘happy’ and ‘th’ were then stamped in Momento Tuxedo Black ink either side of the die cut numbers. I rounded one corner of each of the Whisper White panels and the same corners on the Lemon Lime Twist panels using the new Detailed Trio Punch. These panels were then adhered together with Tombow liquid Adhesive and added to the small Thick Whisper White panel. I then glued the 2 main panels together.

 Special Birthday card using Birthday Blooms and Number of Years by Stampin' Up!

www.crafty-rootes.com – Birthday Blooms and Number of Years by Stampin’ Up!

To finish off I made an envelope using my Envelope Punch Board and the gorgeous Delightful Daisy dsp which will also retire on the 31st May.

I love the bright, sunny colours used on this card. I really hope my Mum likes it.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp Sets
Birthday Blooms & Number of Years
Dies
Large Number Dies
Punches
Detailed Trio
Cardstock
Thick Whisper White, Lemon Lime Twist & Whisper White
Designer Series Paper
Tutti-Frutti dsp, Delightful Daisy dsp
Ink Pads
Momento Tuxedo Black
Blends Pens
Light & Dark Daffodil Delight, Light & Dark Old Olive
Tools
Big Shot, Simply Scored Scoring Tool, Paper Trimmer, Envelope Punch Board, Stampin Scrub and Stampin Mist, Bone folder, Paper Piercer and Scissors (Paper Snips)
Blocks
A, B, D, E & G
Adhesives
Tombow Liquid Adhesive
Accessories
Grid Paper & Whisper White Envelopes

Swaps for OnStage Telford April 2018

Bubble Over Swaps

I am so excited to be going to OnStage in Telford, UK tomorrow. Looking forward to spending time with my team, catching up with old friends and making new ones and of course SWAPPING!!!! Today I am sharing my swap.

I knew I wanted to use my new Stamparatus and the Bottles and Bubbles dies and Bubble Over stamp set to make my OnStage swaps so began with a scrap panel of Whisper White cardstock.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I started by making a template using a scrap piece of Whisper White cardstock and die cutting the large bottle in the middle of the panel using my Big Shot and the Bottles & Bubbles framelit dies. I then die cut a further 64 large bottles from scrap pieces of Whisper White cardstock and set them aside.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I positioned the negative bottle image template onto the Stamparatus on top of the foam panel and inserted the large bottle stamp into the negative space before closing the door to pick up the stamp.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I inserted the die cut bottles, one at a time into the negative space inking up the bottle stamp in Always Artichoke ink (perfect colour for a champagne bottle) and closing the panel to stamp onto the die cut bottle.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I absolutely love this technique and it was so much faster doing it this way. Love it! My Always Artichoke ink pad was quite dry and I don’t have the re-inker so I double stamped the first 3 -4 bottles but the more I stamped the more I liked the aged, vintage look the dry ink pad gave so decided not to double stamp the remaining bottles.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I die cut 65 of the large bottle labels from scrap Whisper White cardstock with the Bottles and Bubbles dies and die cut lots of stars using the Mini Treat Bag dies and scraps of Real Red cardstock. I added a star to the centre of each label with Tombow Liquid Adhesive then added the label with the same glue to the front of each bottle.

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I cut 65 panels of Whisper White 4¾” by 3” and rounded the upper right hand corner with my Envelope Punch Board. I placed the panels onto the Stamparatus platform and laid the sentiment stamp from the Balloon Celebrations stamp set – love the font – onto the panel then picked it up with the right hand panel. I inked up the stamp with Real Red ink and stamped onto each panel in turn. Perfectly positioned!

Template for multiple stamping using the Stamparatus

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

Next, I laid a bottle into position on the stamped Whisper White panel and stamped the stars from the Confetti Celebration stamp set in Real Red ink, I repeated this step on the other panels. The Whisper White layers were then glued to panels of Real Red cardstock 5” by 3¼” also with the upper right hand corner rounded.

Assembling swaps for OnStage April 2018

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

I added the die cut bottles on Stampin’ Dimensionals to the stamped panel before adding the whole topper to a Thick Whisper White card base. To finish off I added some Basic Rhinestones to each card.

Swaps for OnStage Telford April 2018

www.crafty-rootes.com – Bubble Over Bundle by Stampin’ Up for OnStage swaps

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp sets
Bubble Over, Balloon Celebration & Confetti Celebration
Dies
Bubbles & Bubbles & Mini Treat Bag
Cardstock
Thick Whisper White, Real Red & Whisper White
Ink Pads
Always Artichoke & Real Red
Tools
Big Shot, Stamparatus, Paper Trimmer, Envelope Punch Board, Stampin Scrub and Stampin Mist, Bone folder, Paper Piercer and Scissors
Block
A
Adhesives
Tombow Liquid Adhesive & Stampin’ Dimensionals
Accessories
Basic Rhinestones

Sweet birthday card featuring a toucan

Bird Banter card

Today I am sharing a sweet little card made using the Bird Banter stamp set from the Spring/Summer Catalogue.

Sweet birthday card featuring a toucan

www.crafty-rootes.com – Bird Banter by Stampin’ Up!

I started with a panel of Whisper White cardstock measuring 3⅞” by 2⅜”. I stamped the sentiment in Momento Tuxedo Black ink at the bottom of the panel and added the ‘toucan’ image on top using the same ink. I added the balloon in the Momento Tuxedo Black ink.

Sweet birthday card featuring a toucan

www.crafty-rootes.com – Bird Banter by Stampin’ Up!

I used the following Stampin’ Blends to colour in the image – Light & Dark Night of Navy, Light & Dark Bermuda Bay, Light & Dark Daffodil Delight and Light & Dark Pool Party. I added a retired Black Rhinestone eye to the bird.

Sweet birthday card featuring a toucan

www.crafty-rootes.com – Bird Banter by Stampin’ Up!

I rounded the top of the panel with my Envelope Punch Board and backed it with a panel of Daffodil Delight cardstock measuring 4” by 2½”, also with a rounded corner.

Taking a Pool Party card base I stamped the left side of the card front using Pool Party ink and added a 5⅞” by ¾” piece of Bubble and Fizz dsp using Tombow Liquid Adhesive. The stamped panel was added to the card front on Stampin’ Dimensionals.

Such a simple, sweet card. Hope you like it.

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp sets
Bird Banter
Cardstock
Pool Party, Daffodil Delight & Whisper White
DSP
Bubble & Fizz
Ink Pads
Momento Tuxedo Black
Stampin’ Blends
Light & Dark Night of Navy, Light & Dark Bermuda Bay, Light & Dark Daffodil Delight and Light & Dark Pool Party
Tools
Envelope punch Board, Paper Trimmer, Stampin Scrub and Stampin Mist, Bone folder, Paper Piercer and Scissors
Blocks
A, C, H & H
Adhesives
Tombow Liquid Adhesive & Stampin’ Dimensionals
Accessories
Black Rhinestones (retired) & Whisper White Envelope

Envelope Punch Board boxes to hold little treats from Amsterdam for my team

Oops meant to post this yesterday but seem to have got my days muddled up………don’t you hate when that happens……….Still better late than never. Here are some cute  little boxes I made to hold some choccy treats for my team members as they were unable to come with me to Onstage in Amsterdam. I had to share the love and chocolate always hits the spot.

 

I divided the chocolates so that all my team members had the same number – don’t want any fighting, measured the pile of chocolate to work out the size of paper I needed to make the box and after a lot of head scratching I decided to use the Envelope Punch Board. I went to a fantastic site – http://thecraftyowl.co.uk/boxbuster  – entered the measurements and the amazing calculator told me that I needed a piece of dsp measuring 5¼” by 5¼” – I used the retired ‘Inside The Lines’ dsp for to make my boxes but any dsp would work. The box buster is such an amazing tool created by Joanne James  aka The Crafty Owl and I was lucky enough to meet her, along with her team mate Helen whilst at Onstage. We are also going to be sharing team training with Joanne’s team in May which should be fun.

www.crafty-rootes.com – Envelope Punch Board project using Stampin’ Up! product

Using the Envelope Punch Board I punched and scored at 1 ½” and 2 ½” then turned the dsp 90⁰, matched up the 2 score lines, punched and scored again and repeated all the way around.

www.crafty-rootes.com – Envelope Punch Board project using Stampin’ Up! product

Then I folded and burnished the score lines and cut up the 4 tabs on the long sides before adding glue (Fast Fuse Adhesive) to the tabs and adhering them to the short sides forming the base of the box. I popped in the chocolates and folded the 2 small side tabs in, one of the large tabs then folded inwards with the tip tucked in. The remaining side then folded over to close the top. It is slightly domed and the point is folded down and held closed with a Mini Glue Dot.

www.crafty-rootes.com – Envelope Punch Board treat boxes made using Stampin’ Up! products

Once closed, I wrapped a length of twine, I used retired stock, 3 times around the box and tied in a bow. I stamped the sentiment from the Banners For You stamp set onto Whisper White cardstock and die cut it using a sweet little tag from the Cutie Pie Thinlet dies and tied it on using White Baker’s Twine.

Thanks for stopping by my blog today, if you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and you would like one, please let me know and I will send one to you.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon

Mo x

Supplies used:
Stamp sets
Banners For You
Dies
Cutie Pie Thinlits Dies
Cardstock
Whisper White
Ink Pads
Blackberry Bliss, Mossy Meadow and Lost Lagoon –  all retired colours
Tools
Paper Trimmer, Envelope Punch Board, Stampin Scrub and Stampin Mist, Big Shot and Multipurpose platform, Bone folder, Paper Piercer and Scissors
Acrylic Blocks
B
Adhesives
Fast Fuse & Mini Glue Dots
Sundries
White Baker’s Twine & Blackberry Bliss, Mossy Meadow and Lost Lagoon Twine – retired

Large Number Dies meets Botanical Blooms

It was a beautiful, crisp sunny day when I created a 50th Wedding Anniversary card for my Aunt and Uncle who celebrated over the weekend.

I cut the 50 from Gold Foil Paper using the Large Number Framelit Dies and added it to a 3” by 3” square of Whisper White cardstock. I rounded the top right corner with the Project Life Corner Rounder and added the Whisper White layer to a 3¼” by 3¼” to a panel of Cherry Cobbler with the top right hand corner also rounded.

www.crafty-rootes.com – Stampin’ Up! Large Number Dies and Botanical Builder dies

I couldn’t find any designer Series Paper (dsp0 I liked and ended up using a piece of retired Winter Wonderland dsp 5½” by 5½”. Love these thick gold stripes which give a really luxurious feel to the card. I added the topper piece I had created, with Stampin’ Dimensionals to the top right hand side of the dsp panel which I had adhered directly to the Whisper White card base using Tombow Liquid Adhesive.

www.crafty-rootes.com – Stampin’ Up! Botanical Builder dies and Large Number dies

I then die cut some of the flowers and leaves using the Big Shot and the Botanical Builders dies in Cherry Cobbler, Gold Foil and Chocolate Chip cardstock and layered them to give some added dimension and interest. I added them using Stampin’ Dimensionals and Mini Glue Dots around the bottom left hand corner of the topper. They looked lovely, very elegant.  I finished them off by adding White Perfect Accents to each of the flower centres.

www.crafty-rootes.com – Stampin’ Up! Large Number dies and Botanical Builder dies

The sentiment from the One Wild Ride stamp set was stamped in Cherry Cobbler ink then  hand trimmed out and added with Stampin’ Dimensionals. At the last minute I added a small Vellum butterfly punched out using the Bitty Butterfly punch and decorated it with a Cherry Cobbler Enamel Accent. I made an envelope using some retired Cherry Cobbler dsp and my Envelope Punch Board.

 

Thanks for stopping by my blog today, if you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and you would like one, please let me know and I will send one to you.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you.

Details of the products I used for this project can be found below. Please visit my blog again soon.

Mo x

Supplies used:
Stamp sets
One Wild Ride
Dies
Large Number Dies & Botanical Builder dies
Cardstock
Thick Whisper White, Whisper White, Cherry Cobbler, Chocolate Chip and Gold Foil
Designer Series Paper
Winter Wonderland (retired) & Envelope Paper
Ink Pads
Cherry Cobbler
Punches
Bitty Butterfly Punch, & Project Life Corner Rounder
Tools
Paper Trimmer, Stampin Scrub and Stampin Mist, Big Shot + Magnetic Platform,  Envelope Punch Board, Bone folder, Paper Piercer and Scissors
Acrylic Block
H
Adhesives
Tombow Mono Multi Liquid, Stampin’ Dimensionals & Mini Glue Dots
Sundries
White Perfect Accents & Enamel Shapes

Botanical Blooms stamp set and Botanical Builder Framelits for a special card

Botanical Blooms stamp set and Botanical Builder Framelits for a special card

At last, after nearly 3 weeks of illness I am back in the craft room – whoop whoop – and just in time to make a special card for my youngest Aunt who turns 70 on Saturday.

1-DSCF7402I got out the Botanical Blooms stamp set and the co-ordinating Botanical Builder Framelit dies and a selection of cardstock from the subtles family and spent a happy hour die cutting flowers and leaves. I love that you can stamp the die cuts to add texture to the shapes.

I used So Saffron, Wisteria Wonder, Soft Sky, Pink Pirouette, Wild Wasabi and Basic Grey cardstock and layered up the flowers with the different colours to give dimension. I also inked the edges of the flowers using co-ordinating inks and a sponge dauber to add some depth to the cardstock.

1-DSCF7404

I used Thick Whisper White cardstock to make a 5½” square card and stamped the sentiment ‘Look Who’s Turning ‘ – from the Number of Years stamp set, in Basic Grey ink at the top of the card on the right hand side. I then stamped the 7 and the 0 with the same colour ink onto Whisper White cardstock and die cut the numbers using the co-ordinating Large Number Framelit Dies and added them to the card front with dimensionals.

1-DSCF7403I then arranged the leaves and flowers around the numbers and sentiment. I stamped the dotted stamp with Wild Wasabi ink around the die cut flowers to add some more texture and added some basic rhinestones for some bling. I then made an envelope using the Envelope Punch Board and a piece of dsp from the Wildflower Fields stack. This is one of the Sale-A-Bration items you can choose for free with a £45 order.

I am really happy with the card and I really hope my Aunt likes it

Thank you for stopping by my blog today and I hope to see you again soon.

Mo x