Masterfully Made dsp and Share A Milkshake stamp set and dies by Stampin' Up! used to make a pretty card for the Share It Sunday Blog Hop

Milkshake card for the Share It Sunday Blog Hop

Posted on July 30, 2023July 21, 2023 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. The Share A Milkshake stamp set was on my desk so I have made my card using it.

Colours used in this card are:

To recreate the Milkshake card, you will need;

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛”
Masterfully Made dsp – 5⅜” by 3⅝”
Basic Black card – 3⅝” by 2¼”
Basic White card – 3¾” by 2½”
Basic Back card – 1¾” by ⅝”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

The panel of Masterfully Made designer series paper (dsp) was glued, using Multipurpose Liquid Adhesive, to the Berry Burst card front.

wwww.crafty-rootes.co.uk – The Share A Milkshake stamp set and dies used with the Masterfully Made dsp to make a pretty card for the Share It Sunday Blog Hop

Using the Deckled Rectangle dies, I die cut a label from the 3¾” by 2½” panel of Basic White card and glued it to the 3⅝” by 2¼” piece of Basic Black card. This was added to the card base on Dimensionals.

wwww.crafty-rootes.co.uk – The Share A Milkshake stamp set and dies used with the Masterfully Made dsp to make a pretty card for the Share It Sunday Blog Hop

On scrap Basic White card, I stamped the milkshake glass – the solid image in 2^nd generation Fresh Freesia ink and the detailed image in full strength Fresh Freesia ink. The scoops of ice-cream were stamped in Berry Burst ink and Lemon Lolly ink. I stamped the straw in Lost Lagoon ink.

wwww.crafty-rootes.co.uk – The Share A Milkshake stamp set and dies used with the Masterfully Made dsp to make a pretty card for the Share It Sunday Blog Hop

All of the images were die cut using the Share A Milkshake Dies. They were added to the raised panel using liquid glue.

wwww.crafty-rootes.co.uk – The Share A Milkshake stamp set and dies used with the Masterfully Made dsp to make a pretty card for the Share It Sunday Blog Hop

The sentiment was stamped in Versamark ink onto the small piece of Basic Black card, I covered it with White Embossing Powder and heat set it with my Heat Tool. I trimmed it down and added it to the card front.

wwww.crafty-rootes.co.uk – The Share A Milkshake stamp set and dies used with the Masterfully Made dsp to make a pretty card for the Share It Sunday Blog Hop

A trio of Tinsel Gems from the three pack completed the card.

Please hop on to share the projects created by my fellow crafters.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty stripy milkshake themed card made using the Share a Milkshake stamp set and dies by Stampin' Up!

Stripy Milkshake card

Posted on June 13, 2023June 3, 2023 by Mo Rootes

I have been playing with the Share a Milkshake stamp set and dies to make a pretty card for a friend.

Colours used in this card are:

To recreate the stripy milkshake card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Lost lagoon card – 5⅞” by 2½”
Basic White card – 5⅞” by 1⅞”
Pebbled Path card – 4½” by 3”
Basic White card – 3¾” by 2”
Pebbled Path card – 3” by ¼”
Scrap Basic White and Silver Foil

Taking the long thin pot from the Earthen Textures stamp set and stamped it sideways down the 5⅞” by 1⅞” panel of Basic White card in full strength and 2^nd generation Leon Lolly ink to make this really cool texture. I added stripes using the long twiggy stem from one of the stamps from the same stamp set using Pebbled Path ink. I saw this technique in a Youtube video by fellow demonstrator Sarine Zijderveld.

Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

Using the Basic Borders Dies, I die cut a decorated edge into the 5⅞” by 2½” panel of Lost Lagoon card. I stripy piece was then glued to the Lost Lagoon panel before being added to the Thick Basic White card base using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

I stamped the milkshake glass onto scrap Basic White card in Lost Lagoon ink and added the solid image in 2^nd generation (stamped off) Lost Lagoon. The ice cream scoops were then stamped in Lemon Lolly and Daffodil Delight inks. All of these images were then die cut using the Share a Milkshake Dies.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

Using the Countryside Corner Dies I cut 2 labels from the Pebbled Path and Basic White and adhered them together using the liquid glue. The label was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

I then glued the die cut pieces to the die cut labels and added a spoon die cut from scrap Silver Foil card.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

The sentiment, from the Sending Smiles stamp set was stamped in Versamark ink onto the thin strip of Pebbled Path card, covered with White Embossing Powder and heat set. I trimmed it down with Scissors and added it to the card front.

A trio of Glossy Dots completed the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Share a Milkshake stamp set by Stampin' Up! used to make a pretty birthday card featuring ice-cream sundaes

Ice-cream Sundae birthday card

Posted on April 11, 2023March 26, 2023 by Mo Rootes

Here is a pretty card featuring ice-cream sundae dishes and made using the Share a Milkshake Dies.

Colours used in this card are:

To recreate the ice-cream sundae card, you will need:

Smoky Slate card base – 8¼” by 5⅞” – scored at 4⅛”
So Saffron card – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Vellum – 5⅛” by 3⅜”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic Black card

The sundae dishes were randomly stamped over the smaller Basic White panel in 2^nd generation Smoky Slate ink.

www.crafty-rootes.com – A pretty card featuring ice-cream sundaes made using the Share a Milkshake stamp set

The ice-cream was added in 2^nd generation So Saffron ink and the decorated piece was added to the So Saffron layer using Multipurpose Liquid Adhesive. The panel was then mounted onto the card front on Dimensionals.

www.crafty-rootes.com – A pretty card featuring ice-cream sundaes made using the Share a Milkshake stamp set

I stamped the sentiment, from the Best Family Ever stamp set, in Versamark ink onto scrap Basic Black card, covered it with White Embossing Powder and heat set it with my Heat Tool. I trimmed it down using Scissors.

www.crafty-rootes.com – A pretty card featuring ice-cream sundaes made using the Share a Milkshake stamp s

The vellum panel was the laid over the stamped panel and the sentiment placed in position. I then lifted the vellum and applied glue to the back of the vellum where it would be hidden by the sentiment and placed it over the stamped panel.

www.crafty-rootes.com – A pretty card featuring ice-cream sundaes made using the Share a Milkshake stamp set

A scattering of Festive Pearls and a double twine bow completed the card,

www.crafty-rootes.com – A pretty card featuring ice-cream sundaes made using the Share a Milkshake stamp set

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Recycled Glasses card

Posted on March 28, 2023March 17, 2023 by Mo Rootes

I have made a card using some stamped milkshake glasses from the Share a Milkshake stamps set and Dies. I stamped these a while ago for another project but ended up not using them.

Colours used in this card are:

To recreate the recycled glasses card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Basic Black card – 5⅝” by 3⅞”
Hues of Happiness dsp – 5½” by 3¾”
Basic Black card – 4⅛ by 2¾”
Basic White card – 4⅛ by 2¾”
Scrap Basic White & Basic Black

I began by gluing the Hues of Happiness dsp to the larger Basic Black layer using Multipurpose Liquid Adhesive. I added the panel to the Thick Basic White card base.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies combined with the Hues of Happiness dsp to to make a recycled glasses card

The glasses had been stamped in Balmy Blue, Granny Apple Green and Bermuda Bay inks. I stamped the solid image in 2^nd generation and the detailed image in full-strength ink.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies combined with the Hues of Happiness dsp to to make a recycled glasses card

The glasses were the die-cut using the Share a Milkshake Dies.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies combined with the Hues of Happiness dsp to to make a recycled glasses card

From the small piece of Basic White card, I die-cut a Deckled Rectangle. The glasses added to the rectangle with either liquid glue or Dimensionals. The decorated piece was then glued to the smaller Basic Black rectangle.

The whole piece was then mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies combined with the Hues of Happiness dsp to to make a recycled glasses card

The sentiment, from the Best Family Ever stamp set was stamped in Versamark ink onto scrap Basic Black card. Covered with White Embossing Powder and heat set before being added to the card front.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies combined with the Hues of Happiness dsp to to make a recycled glasses card

A scattering of Glossy Dots completed the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Three projects made for my March 2023 Classes using the Share a Milkshake stamp set and co-ordinating Dies by Stampin' Up!

Share a Milkshake Class projects

Posted on March 17, 2023March 13, 2023 by Mo Rootes

We had great fun this week creating cards using the Share a Milkshake stamp set and the co-ordinating Dies. Ironically it was snowing when I held the first few classes and ice-creams were not high on our list of treats.

Colours used in these projects are:

Corner Tuck card

Fresh Freesia card base 6¼” by 5⅞”– scored at 4¼”
Dandy Designs dsp – 5¾” by 4⅛
Dandy Designs dsp – 5¾” by 2”
Calypso Coral – 3⅞” by 2½”
Petal Pink – 3¾” by 2⅜
Basic White – 4” by 2¾” – to die cut a deckled rectangle
Basic White – 3⅝”by 2⅜ – for the inside
Basic White strip – ½” wide
Dandy Designs dsp 2” by 2” cut in half on the diagonal
Scrap Basic White

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating Dies used to make 3 projects for March 2023 Classes

Glue the 2 panels of dsp to the Fresh Freesia card base and add the triangle of dsp to the upper right corner.

Stamp the solid glass onto deckled rectangle in 2^nd generation Fresh Freesia ink. The detailed image was added over top in full strength Fresh Freesia ink. The ice-cream scoop was stamped in Petal Pink ink onto scrap Basic White card and the straw in Sweet Sorbet ink, they were then die cut out and added at the top of the glass with Dimensionals.

The stamped panel was glued to the Petal Pink panel and then to the layer of Calypso Coral card and added with liquid glue to the smaller front panel of the card base.

The sentiment was stamped in Calypso Coral ink onto scrap card, trimmed down and added to the card front. We then added an extra white panel to the back piece where it would be hidden, this is where a message can be written.

Ice-cream Cone card

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Dany Designs dsp – 5⅞” by 1⅜”
Calypso Coral – 5⅞” by ½”
Crumb Cake – 4” by 3” – use to die cut the waffle cone.
Scrap Basic White, Fresh Freesia & Silver Foil

Three projects made for my March 2023 Classes using the Share a Milkshake stamp set and co-ordinating Dies by Stampin' U

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating Dies used to make 3 projects for March 2023 Classes

Glue the Calypso Coral strip to the right-hand side of the dsp panel and then glue to the Thick Basic White card base. Use a Blending Brush to add some Peta Pink ink to the right-hand side of the card front.

Fold up the waffle cone and tuck a piece of scrap Basic White card inside. Place the Fresh Freesia die cut ‘net’ to the back of the cone and add to the card front on Dimensionals.

The ice-cream scoops were stamped in Petal Pink, Calypso Coral and Fresh Freesia inks onto scrap Basic White card and die cut using the Share a Milkshake Dies. They were added above the cone on Dimensionals.

A die cut silver spoon was added to the ice-cream and a trio of hearts stamped in Calypso Coral ink. The sentiment was stamped in the same ink onto the card front.

Ice-cream Sundae card

Petal Pink card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White – 5½” by 3¾” x 2
Dandy Designs dsp – 5⅜” by 3⅝”
Fresh Freesia card – 3½” by ½”
Basic White – 3¾” by 1½”
Scrap Basic White, Fresh Freesia, Petal Pink & Silver Foil

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating Dies used to make 3 projects for March 2023 Classes

The panel of dsp was glued to one of the 5½” by 3¾” panels of Basic White. The piece was then glued to the Petal Pink card base,

A scalloped border was die cut from the Fresh Freesia card using the Penned Flowers Dies. It was added to the bottom of the 3¾” by 1½” piece of Basic White. This was then glued to the card front.

Die-cut the sundae glasses and ice-cream scoops from Fresh Freesia and Petal Pink card and add to the Basic White strip. The cherry was inked up in Sweet Sorbet ink and the stem coloured in using an Early Espresso Marker, it was then stamped onto white card and die-cut bore being added to the card front.

The sentiment was stamped in Memento Tuxedo Black ink onto the scrap Basic White, trimmed out with scissors and added to the card front.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating Dies used to make 3 projects for March 2023 Classes

I hope you like the cards. We also used the Dandy Designs dsp in this class.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty love you card for the Stamping Dreams Blog Hop using the Share a Milkshake stamp set and co-ordinating set of dies by Stampin' Up!

Yummy Milkshake card for the Stamping Dreams Blog Hop

Posted on February 9, 2023January 31, 2023 by Mo Rootes

Hello and welcome to the Stamping Dreams Blog Hop where we are using up or recycling left over bits and pieces from other projects. I chose to use a Rich Razzleberry oval, a decorative oval frame, both left over from my January classes and a stamped sundae glass that I didn’t end up using on another project.

Colours used in this card are:

To recreate the yummy milkshake card, you will need:

Polished Pink card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅛” by 3¾”
Rich Razzleberry – 4” by 3” – to die cut the oval
Basic White card – 5” by 4⅛” – to die cut decorative oval frame
Rich Razzleberry card – 1½” by ½”
Rich Razzleberry card – 4⅛” by ½”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White & Polished Pink card

I ran the 5⅛” by 3¾” panel of Basic White, an offcut lying about on my desk, through the Cut & Emboss Machine with the Hive 3D Embossing Folder. It turned out to be a little shorter than I thought so I die cut a scalloped border from the longer strip of Rich Razzleberry card using the Penned Flowers Dies, added it to the bottom of the embossed panel and trimmed off the excess.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating set of dies used to make a pretty love you card for the Stamping Dreams Blog Hop

A piece of Polished Pink Open Weave Ribbon was then wrapped around the panel, secured on the back with Sellotape and the whole piece glued to the Polished Pink card base.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating set of dies used to make a pretty love you card for the Stamping Dreams Blog Hop

I added the decorative oval die cut piece to the card front using small dabs of liquid glue and added the die cut Rich Razzleberry oval in the centre on Dimensionals.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating set of dies used to make a pretty love you card for the Stamping Dreams Blog Hop

The ice cream scoops were stamped in Blushing Bride, Polished Pink and Rich Razzleberry ink and die cut using the Share a Milkshake Dies. I glue them together and then to the Smoky Slate glass and added them to the card front with liquid glue.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating set of dies used to make a pretty love you card for the Stamping Dreams Blog Hop

The sentiment from the Thanks a Bunch stamp set was stamped in Versamark ink onto the small strip of Rich Razzleberry card, covered with White Embossing Powder and heat set with my Heat Tool before it was added to the card front.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and co-ordinating set of dies used to make a pretty love you card for the Stamping Dreams Blog Hop

A trio of each of the following completed the card – hearts die cut from scarp Polished Pink card using the Share a Milkshake dies, Glossy Dots and Pastel Adhesive backed sequins.

Please hop on to see what my crafty friend have to share today.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty card for the Crafty Challenge colour/picture Blog Hop using the pretty Share a Milkshake stamp set and Dies by Stampin' Up!

Share a Milkshake card for the Crafty Challenge Blog Hop

Posted on December 26, 2022January 6, 2023 by Mo Rootes

Hello and welcome to the Crafty Challenge Blog Hop where we are sharing projects made using a colour and or picture challenge. I have used the new Share a Milkshake stamp set which will be available from the 5^th January in my online shop.

Colours used in this project are:

To recreate the share a milkshake card, you will need:

Crumb Cake card base – 8¼” by 5⅞” scored and folded at 4⅛”
Dandy Designs dsp – 5⅞” by 2¼”
Soft Suede card – 3⅝” by 2⅝”
Very Vanilla card – 3½” by 2½”
Very Vanilla card – 5½” by 3¾”
Scrap Very Vanilla

Using the larger ice cream top image, I stamped randomly over the right-hand side of the Crumb Cake card base using 2^nd generation Crumb Cake ink – i.e. I inked up the image, stamped onto scrap paper before stamping onto my card base.

www.crafty-rootes.co.uk – The pretty Share a Milkshake stamp set used to make a pretty card for the Crafty Challenge Blog Hop

I used Multipurpose Liquid Glue to adhere the panel of dsp to the left-hand side of the card front.

www.crafty-rootes.co.uk – The pretty Share a Milkshake stamp set used to make a pretty card for the Crafty Challenge Blog Hop

The base image of the sundae glass was stamped in Crumb Cake ink onto scrap Very Vanilla card. The more detailed image was then stamped over the top in Soft Suede ink. I used the Share a Milkshake Dies to cut out the glass.

www.crafty-rootes.co.uk – The pretty Share a Milkshake stamp set used to make a pretty card for the Crafty Challenge Blog Hop

I stamped the ice cream top onto scrap Very Vanilla card with Mango Melody ink. The straw was stamped in Gray Granite ink onto the same scrap card and both images were die cut using the same set of dies. I used liquid glue to adhere the die cut images together and then to add them to the smaller Very Vanilla panel. The whole piece was mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The pretty Share a Milkshake stamp set used to make a pretty card for the Crafty Challenge Blog Hop

The sentiment from the On the Ocean stamp set was stamped in Gray Granite ink onto scrap Very Vanilla, trimmed down and added to the card front.

www.crafty-rootes.co.uk – The pretty Share a Milkshake stamp set used to make a pretty card for the Crafty Challenge Blog Hop

A Very Vanilla Baker’s Twine bow and a trio of Adhesive Milky Dots completed the card.

Please hop on to share the projects created by my talented friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x