A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

Pretty Petals Classes

The cards I am sharing today were designed for my January classes using the gorgeous Pretty Petals stamp set.

Colours used in these cards are:

 

Column Card

Berry Burst card – 8¼” by 5¾” – scored on the long side at 2”, 4”, 6” & 8”
Fresh Freesia – 5½” by 1¾” x 4
Basic White – 4½” by 3” – die cut a label using the Countryside Corner Dies for the front
Basic White – 4” by 2¼” – die cut a label using the Countryside Corner Dies for the back
Basic White – 3½” by 3” – for stamping and die cutting
Basic White – 1” by ½” – scored at ½” on the long side x 6 – 4 for the front & 2 for the back

 

Place the 4 strips of Fresh Freesia card side by side and butted up against each other. Hold down with a little temporary adhesive if needed.  Use Fresh Freesia ink to stamp the floral image across all 4 pieces overlapping the panels. Keep the panels in order so that the design flows. Adhere the stamped layers to the 2” panels of the Berry Burst card, leaving a border.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

Fold and burnish on all the scorelines. Add glue to the ¼” tab and close the column.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

Stamp the sentiment, from the Heart Shaped stamp set in Mossy Meadow ink at the bottom of the larger die cut label. Add the leafy spray above using the same ink. Fold 4 of the 1” by ½” pieces of Basic White card. Glue 2 of these tabs on either side of the centre scoreline with the fold facing the scoreline. Add 2 more opposite the 2 already in position on the other side of the scoreline. Add glue to the top flaps of these tabs and place the stamped label on top. Hold in place until the glue has bonded.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

On the remaining piece of Basic White card stamp the group of flowers in Berry Burst ink. Die cut the flowers and add them to the die cut label with glue or Mini Dimensionals.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

Stamp the small leafy sprig in Mossy Meadow ink onto the smaller die cut label, add the flowers with Berry Burst ink and add the label to the back of the card using the remaining 2 tabs.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

A trio of Basic Rhinestones finished the card.

 

Speedy Recovery Card

Fresh Freesia card base – 8¼” by 5⅞” – scored at 4⅛”
Fresh Freesia – 5½” by 3¾”
Basic White – 4” by 2¼”- die cut a label using the Nested Essentials dies
Basic White – 5½” by 3¾” – for the inside
Scrap Basic White

 

The panel of Fresh Freesia card was embossed using the Perfectly Plaid 3D Embossing Folder and glued to the Fresh Freesia card base.

 

Fresh Freesia card base – 8¼” by 5⅞” – scored at 4⅛” Fresh Freesia – 5½” by 3¾” Basic White – 4” by 2¼”- die cut a label using the Nested Essentials dies Basic White – 5½” by 3¾” – for the inside Scrap Basic White

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

The sentiment, from the Sweetly Scripted stamp set (retired) was stamped across the label in Mossy Meadow ink and it was added to the card front on Dimensionals.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

Onto the scrap Basic White card, we stamped the group of flowers in Berry Burst ink. A selection of the small leaves were stamped in Soft Sea Foam and Mossy Meadow ink onto the same scrap card and everything was die cut out.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

The flowers and leaves were then placed on or tucked under the raised label and secured in place with glue or Mini Dimensionals. A trio of Basic Rhinestones finished the card.

 

Birthday card

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛”
Soft Sea – 5½” by 3¾”
Berry Burst – 3⅞” by 2¾”
Basic White – 3¾” by 2⅝”
Basic White – 2½” by 1”
Basic White – 5½” by 3¾”

 

The panel of Soft Sea Foam card was embossed using the Perfectly Plaid 3D Embossing Folder, a length of Silver Edged Berry Burst Ribbon (retired) was wrapped around the panel before it was glued to the Soft Sea Foam card base.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

The leafy spray was inked up using Soft Sea Foam ink and I added Mossy Meadow ink to the bases of the leaves using a Sponge Dauber. I stamped the image onto the 3¾” by 2⅝” piece of Basic White card.

 

We inked the group of flowers with Fresh Freesia ink and added Berry Burst ink to the base of the petals using a Sponge Dauber. The flowers were then stamped into the spaces of the leafy image. The stamped panel was then glued to the Berry Burst layer.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

The sentiment, from the Country Birdhouse stamp set was stamped at the bottom of the 2½” by 1” piece of Basic White card. The top of the strip was then glued to the back of the Berry Burst card and the whole piece added to the card front on Dimensionals. A trio of Basic Rhinestones finished the card.

 

A trio of cards, including a column fun fold card made for my January 2025 classes using the Pretty petals stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Pretty petals stamp set and Dies used to make a trio of cards including a column fun fold card for my January 2025 classes

I hope you like them.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

Mixed Media CASE’d card – CASE A Friend Blog Hop

Hello and welcome to the CASE a Friend Blog Hop. CASE means ‘copy and share everything’ or ‘copy and selectively edit’ and I have chosen the second option and a card designed by Karen Ksenzakovic of creativestampingdesigns.com,  I also used a stamp set which will be available from the 7th January 2025 from my online store called Mixed Media.

 

Colours used in this card are:

 

To recreate the mixed media card, you will need:

Pebbled Path card base – 8¼” by 5⅞” – scored at 4⅛”
Melon Mamo card – 5⅝” by 3⅞”
Basic White card – 5½” by 3¾”
Pebbled Path card – 3½” by 1⅛” – 3
Bloom Impressions dsp -3⅜” by 1” x 3
Basic White card -5½” by 3¾”
Scrap Basic White card

 

I ran the 5½” by 3¾” panel of Basic White card through the Stampin’ Cut & Emboss Machine with the Forever Plaid Embossing Folder. The embossed panel was then adhered to the Melon Mambo layer and then to the Pebbled Path card front.

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

www.crafty-rootes.com – The Mixed Media stamp set used with the Bloom Impressions dsp to make a pretty card for the CASE A Friend Blog Hop

The three pieces of Bloom Impressions were then glued to the three panels of Pebbled path card. These were then added to the card front.

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

www.crafty-rootes.com – The Mixed Media stamp set used with the Bloom Impressions dsp to make a pretty card for the CASE A Friend Blog Hop

The large floral spray from the Mixed Media stamp set was stamped onto scrap Basic White card using Pebbled Path ink. I die cut it using the Mixed Media Dies.

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

www.crafty-rootes.com – The Mixed Media stamp set used with the Bloom Impressions dsp to make a pretty card for the CASE A Friend Blog Hop

The following Blends Pens were used to colour in the image – Melon Mambo, Flirty Flamingo, Highland Heather and Shy Shamrock. The floral spray was then added to the card front on Dimensionals.

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

www.crafty-rootes.com – The Mixed Media stamp set used with the Bloom Impressions dsp to make a pretty card for the CASE A Friend Blog Hop

The sentiment, from the Friendly Seagulls stamp set, was stamped on scrap Basic White card in Pebbled Path ink and trimmed it out using sharp Scissors. I added it to the card front on Dimensionals.

 

A pretty card made for the CASE A Friend Blog Hop using the Mixed Media stamp set and the Bloom Impressions dsp from Stampin' Up!

www.crafty-rootes.com – The Mixed Media stamp set used with the Bloom Impressions dsp to make a pretty card for the CASE A Friend Blog Hop

A trio of Shiny Sequins completed the card.

Please hop along to see what has inspired my crafty friends.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

Snowy Scenes Small Snow Globe card

Here is a pretty Snowy Scenes Globe Christmas card made using the Snowy Wonder stamp set and Snowy Scenes dsp.

Colours in this card are:

 

To recreate the snowy scenes snow globe card, you will need:

Shaded Spruce card base – 8¼” by 5⅞” – scored at 4⅛”
Basic White card – 5⅜” by 3⅝”
Pool Party card – 5¼” by 3½”
Snowy Scenes dsp
Basic White card – 5½” by 3¾” – for the inside
Scrap Petal Pink card

 

I embossed the Pool Party panel using the Forever Plaid Embossing Folder and glued it to the 5⅜” by 3⅝” piece of Basic White card.

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Snowy Scenes dsp used with the Snowy Wonder stamp set and Dies to make an adorable Christmas card

A length of Iridescent Striped Ribbon was then wrapped around the panel before it was glued to the Shaded Spruce card front.

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Snowy Scenes dsp used with the Snowy Wonder stamp set and Dies to make an adorable Christmas card

Using sharp Scissors I fussy cut out a snow globe and added it over the ribbon to the front the card.

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Snowy Scenes dsp used with the Snowy Wonder stamp set and Dies to make an adorable Christmas card

At this point I decided I didn’t like the Pumpkin Pie snow globe base………. So I stamped the sentiment in Shaded Spruce ink onto a scrap of Petal Pink card and die cut it using the Snowy Wonder Dies I then glued the die cut piece over the dsp base. I loved that the die cut was slightly smaller leaving a small Pumpkin Pie border.

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Snowy Scenes dsp used with the Snowy Wonder stamp set and Dies to make an adorable Christmas card

A ribbon bow and a trio of Iridescent Faceted Gems finished the card.

 

An adorable Christmas card made using the Snowy Scenes dsp and the Snowy Wonder stamp set and Dies from Stampin' Up!

www.crafty-rootes.com – The Snowy Scenes dsp used with the Snowy Wonder stamp set and Dies to make an adorable Christmas card

So pretty.

 Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

Snowy Wonder card – Share It Sunday Blog Hop

Hello and welcome to the Share It Sunday Blog Hop where we are sharing something we have been working on recently. I have made a card using the Snowy Wonder stamp set and the gorgeous new Forever Plaid Embossing Folder.

Colours used in this card are:

 

To recreate the snowy wonder card, you will need:

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
Pool Party card – 5½” by 3¾”
Shaded Spruce card – 2¾” by 2¾” – rounded upper left corner
Basic White card – 2¾” by 2¾” – rounded upper left and lower right corner
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

 

I began by cutting a length of white Diagonal Striped Ribbon and colouring it with my dark Cherry Cobbler Blends Pen and set it aside to dry.

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

www.crafty-rootes.com – The adorable Snowy Wonder stamp set and dies used to make a pretty Christmas card – Share it Sunday Blog Hop

The 5½” by 3¾” panel of Pool Party was embossed using the Forever Plaid Embossing Folder. When the ribbon was dry, I wrapped it around the embossed panel and secured it on the back with Sellotape. The whole piece was the adhered to the Pool Party card front.

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

www.crafty-rootes.com – The adorable Snowy Wonder stamp set and dies used to make a pretty Christmas card – Share it Sunday Blog Hop

I used a ¾” circle punch to create a mask from a Post It Note. The mask was adhered to the upper half of the 2¾” by 2¾” piece of Basic White card and using a Blending Brush I added Pool Party ink to the top ¾ of panel and the mask was removed.

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

www.crafty-rootes.com – The adorable Snowy Wonder stamp set and dies used to make a pretty Christmas card – Share it Sunday Blog Hop

The trees were stamped on the inked panel in Shaded Spruce ink and the dotty image was then stamped all over the top of the stamped piece in Pool Party ink. The stamped panel was then adhered to the Shaded Spruce layer and added it to the card front on Dimensionals.

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

www.crafty-rootes.com – The adorable Snowy Wonder stamp set and dies used to make a pretty Christmas card – Share it Sunday Blog Hop

The house was stamped in Cherry Cobbler ink onto scrap Basic White card and then trimmed out using sharp Scissors. The house was added to the card front with Mini Glue Dots.

 

A pretty Christmas card for the Share it Sunday Blog Hop made using the adorable Snowy Wonder stamp set and dies from Stampin' Up!

www.crafty-rootes.com – The adorable Snowy Wonder stamp set and dies used to make a pretty Christmas card – Share it Sunday Blog Hop

The sentiment, from the Peaceful Season stamp set was stamped on scrap Basic White card in Cherry Cobbler ink. I die cut the sentiment using the Greetings of the Season Dies. I ran it twice through the Stampin’ Cut & Emboss Machine to make the label smaller and to remove the hole at one end. The sentiment was the added to the card front on Dimensionals.

A trio of Iridescent Pearls completed the card.

Please hop along to share the inspiration provided by my crafty friends.



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

Christmas Snow Globe card – Mini Catalogue Blog Hop

Hello and welcome to the New Mini Catalogue Blog Hop where we are sharing projects made using items from the September to December Mini Catalogue. I have used the Yuletide Village stamp set and Snowy Wonder Dies to make my snow globe themed card.

Colours in this card are:

 

To recreate the snow globe card, you will need:

Pool Party card base – 8¼” by 5⅞” – scored at 4⅛”
Pool Party card – 5⅝” by 3⅞”
Basic White card – 4” by 3½”
Shaded Spruce card – 3” by 1½”
Basic White card – 3” by ⅜”
Basic White card – 5½” by 3¾” – for the inside

 

I embossed the 5⅝” by 3⅞” panel of Pool Party card using the Forever Plaid Embossing Folder. This was glued to the Pool Party card front and set aside.

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

www.crafty-rootes.com – The Yuletide Village stamp set used with the Snowy Wonder Dies to make a Christmas snow globe card for the Mini Catalogue Blog Hop

Using the Snowy Wonder Dies I die cut the globe from the 4” by 3½” panel of Basic White card.

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin’ Up!

The church from the Yuletide Village stamp set was stamped on the die cut globe using Memento Tuxedo Black ink. I coloured it in using the following Blends Pens – Boho Blue, Lemon Lolly, Real Red, Granny Apple Green, Shaded Spruce, Smoky Slate and Crumb Cake.

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

www.crafty-rootes.com – The Yuletide Village stamp set used with the Snowy Wonder Dies to make a Christmas snow globe card for the Mini Catalogue Blog Hop

Using the Snowy Wonder stamp set I die cut the base of the snow globe from the piece of Shaded Spruce card. I added the globe to the base using Dimensionals and mounted it onto the card front.

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

www.crafty-rootes.com – The Yuletide Village stamp set used with the Snowy Wonder Dies to make a Christmas snow globe card for the Mini Catalogue Blog Hop

The sentiment, from the Reindeer Fun stamp set was stamped on the strip of Basic White card using Shaded Spruce ink. The sentiment was then added to the card front.

 

A Christmas snow globe card for the Mini Catalogue Blog Hop using the Yuletide Village stamp set used with the Snowy Wonder Dies from Stampin' Up!

www.crafty-rootes.com – The Yuletide Village stamp set used with the Snowy Wonder Dies to make a Christmas snow globe card for the Mini Catalogue Blog Hop

A scattering of White Loose Snowflakes and a little Wink of Stella completes the card.

Please hop on to share the inspiration provided by my crafty friends.



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used: