Good Luck Chick

Posted on September 5, 2021August 30, 2021 by Mo Rootes

Today I am sharing a jolly good luck chick card made to celebrate a friends’ retirement at the end of August. Like me she wok as a nurse for over 35 years at Royal Papworth Hospital, a specialist heart and lung hospital here in the UK. I am so looking forward to celebrating with her with a visit to our favourite café for a special full English breakfast.

Colours used in this project are:

To recreate the good luck chick card, you will need:

Poppy Parade card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Soft Suede card – 5¾” by 3⅞” – rounded upper left corner
Basic White card – 5⅝” by 3¾” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Basic White ¼” strip

I started by stamping the 1^st dancing chicken on the right-hand side of the slightly longer Basic White panel. I stamped the same image onto three Post It Notes and cut around the images with Scissors and used these to provide masks.

www.crafty-rootes.co.uk – A quirky, fun and happy retirement card made using the Birthday Chick stamp set by Stampin’ Up!

One of the masks was placed over the stamped chicken and another chicken was stamped to the left. The second mask was then placed over the top of this chicken and another bird stamped to the left.

www.crafty-rootes.co.uk – A quirky, fun and happy retirement card made using the Birthday Chick stamp set by Stampin’ Up!

The last mask was then added to the third chicken and the chicken with a balloon was stamped so that she appeared to be floating out of the gang. The masks were then removed.

I used the following Blends Marker Pens to colour in the chicks and the balloon – Soft Suede, Crumb Cake, Cinnamon Cider, Gray Granite, Poppy Parade, Daffodil Delight & Bronze

The stamped panel was layered onto the Soft Suede panel using Multipurpose Liquid Adhesive. The whole piece was then added to the Poppy Parade card base on Dimensionals.

www.crafty-rootes.co.uk – A quirky, fun and happy retirement card made using the Birthday Chick stamp set by Stampin’ Up!

The sentiment, from the Welcoming Woods stamp set, was stamped in Poppy Parade ink onto the strip of Basic White and the strip was cut down and flagged with Scissors. I added a trio of Red Rhinestones to finish the card.

www.crafty-rootes.co.uk – A quirky, fun and happy retirement card made using the Birthday Chick stamp set by Stampin’ Up!

I hope this card brings a smile to my friend’s face. Hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A fun penguin themed birthday card, great for a child and made using the Penguin Place stamp set by Stampin' Up!

Birthday Penguin card

Posted on September 3, 2021August 26, 2021 by Mo Rootes

Here is a cute, bright and cheerful birthday penguin themed card made using the Penguin Place stamp set. A great card for a child or young person.

Colours used in this project are:

To recreate the birthday penguin card, you will need:

Poppy Parade card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Pacific Point card – 4⅝” by 3⅛” – rounded upper left corner
Basic White card – 4½” by 3” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner – for the inside
Basic White card – ¼” strip

I stamped the balloon in Poppy Parade ink randomly all over the Poppy Parade card front to provide some texture and added 3 strips of Gold Shimmer Ribbon secured with Tear ‘n Tape.

www.crafty-rootes.co.uk – A fun, bright and cheerful birthday penguin card made using the Penguin Place stamp set by Stampin’ Up!

The cute little penguin was stamped in Memento Tuxedo Black ink onto the small panel of Basic White card and added the balloon string using the same ink. I added a little strip of ground in the same ink.

www.crafty-rootes.co.uk – A fun, bright and cheerful birthday penguin card made using the Penguin Place stamp set by Stampin’ Up!

The bow tie was added with Poppy Parade ink and the penguin’s beak in Mango Melody ink. I stamped the balloon in Pacific Point.

www.crafty-rootes.co.uk – A fun, bright and cheerful birthday penguin card made using the Penguin Place stamp set by Stampin’ Up!

Using the stamp that is meant for the penguin’s eyes I stamped in Poppy Parade, Mango Melody and Pacific Point to create a fun, spotty background.

www.crafty-rootes.co.uk – A fun, bright and cheerful birthday penguin card made using the Penguin Place stamp set by Stampin’ Up!

The stamped panel was added to the Pacific Point layer with Multipurpose Liquid Adhesive before it was added on Dimensionals to the Poppy Parade card front.

www.crafty-rootes.co.uk – A fun, bright and cheerful birthday penguin card made using the Penguin Place stamp set by Stampin’ Up!

Such a cute card. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Delicate Dahlias stamp set used to make a pretty floral sympathy card using Stampin' Up! product

Blue Dahlias

Posted on August 31, 2021August 26, 2021 by Mo Rootes

I have used the pretty Delicate Dahlias stamp set to make a pretty blue dahlias themed sympathy card.

Colours used in this project:

To recreate the blue dahlias card, you will need:

Misty Moonlight card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Balmy Blue card – 5⅜” by 3⅝” – rounded upper left corner
Basic White card – 5¼” by 3½” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner – for the inside
Scrap Basic White & Balmy Blue

I stamped the outline of the beautiful dahlia in Misty Moonlight ink onto the smaller Basic White panel. The infill stamped was inked in Balmy Blue and stamped to colour the flowers.

www.crafty-rootes.co.uk – A pretty sympathy card featuring blue dahlias and made using the Delicate Dahlias stamp set

The outline of the smaller flower was then stamped in Pale Papaya ink between the dahlias. The infill stamp was inked up with Pale Papaya, stamped off then used to add subtle colour to the flowers.

www.crafty-rootes.co.uk – A pretty sympathy card featuring blue dahlias and made using the Delicate Dahlias stamp set

The stamped panel was added to the Balmy Blue layer with Multipurpose Liquid Adhesive and a length of Pale Papaya Open Weave Ribbon added and secured on the back with Sellotape. The whole piece was then added to the Misty Moonlight card base on Dimensionals.

www.crafty-rootes.co.uk – A pretty sympathy card featuring blue dahlias and made using the Delicate Dahlias stamp set

I stamped the sentiment in Misty Moonlight ink onto scrap Basic White card and punched it out using the Tailored Tag Punch. I punch the same label from scrap Balmy Blue card, cut it in half from side to side and adhered it to the stamped label so that a little of the blue showed top and bottom. It was added over the ribbon on Dimensionals.

www.crafty-rootes.co.uk – A pretty sympathy card featuring blue dahlias and made using the Delicate Dahlias stamp set

A bow was added with a Mini Glue Dot and a trio of Elegant Faceted Gems dotted around to complete the card.

www.crafty-rootes.co.uk – A pretty sympathy card featuring blue dahlias and made using the Delicate Dahlias stamp set

I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A quirky anniversary card made using the Counting Sheep stamp set, a Sale-a-Bration item from Stampin' Up!

Counting Sheep card for the Stamper’s Showcase Blog Hop

Posted on August 30, 2021August 30, 2021 by Mo Rootes

Hello and welcome to the Stampers Showcase Blog Hop where we are sharing something we have been working on and I have chosen to share a cute Counting Sheep card made for my daughter and son in laws 1^st wedding anniversary yesterday. This gorgeous stamp set is one of the offerings in the up-coming Sale-a-Bration brochure which goes live on the 3^rd January along with the July – December Mini Catalogue.

Colours used in this project are:

To recreate the counting sheep card, you will need:

Pear Pizzazz card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Pacific Point card – 5⅛” by 3⅝” – rounded upper right corner
Basic White card – 5” by 3½” – rounded upper right corner
Basic White card – 5½” by 3¾” – rounded upper right corner – for the inside
Real Red card – 5⅞” by ⅓” x 2
Basic White card – 2 ½” by ⅜”
Scrap Basic White

I glued the 2 strips of Real Red card stock to the Pear Pizzazz card base using Multipurpose Liquid Adhesive.

Using the Stamparatus I stamped the sweet little sheep in Memento Tuxedo Black ink onto the smaller panel of Basic White card. T he stamped panel was then removed and replace with the Silicon Mat. I inked the image again with the same ink and stamped it again on to the mat, carefully added the stamped panel – face down onto the inked Silicon Mat and rubbed firmly with my fingers to encourage to ink to transfer. On lifting up the panel the reverse image was seen. Such a great idea.

www.crafty-rootes.co.uk – A cute counting sheep congratulations card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

Using a Blending Brush I inked the ground with Pear Pizzazz ink. I added the tufts of grass in Pear Pizzazz to ground the happy sheep.

I stamped the sheep image again, twice, onto Post It Notes – one on the front and the 2^nd on the reverse of the Post It Note. These were cut out using scissors. They were then placed over the 2 stamped images and the sky was added with a Blending Brush, Balmy Blue ink and a torn piece of copy paper.

www.crafty-rootes.co.uk – A cute counting sheep congratulations card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

With the masks still in place I drew in 2 balloon strings with my Basic Black Stampin’ Write Marker. The masks were removed and the sheep coloured with Smoky Slate and Petal Pink Blends Markers.

www.crafty-rootes.co.uk – A cute counting sheep congratulations card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I stamped the balloons – they are actually the small heart shaped leaf from the Love of Leaves stamp set in Real Red and Pacific Point ink onto scrap Basic White. I cut them out using scissors. The heart shaped balloons were then added to the stamped panel with Dimensionals. The whole panel was then added to the Pacific Point panel with liquid glue and then to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute counting sheep congratulations card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

The sentiment, from the Art Gallery stamp set was stamped in Memento Tuxedo Black ink onto the strip of Basic White card, trimmed and flagged with scissors and added to the card front with liquid glue.

www.crafty-rootes.co.uk – A cute counting sheep congratulations card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

To finish the card, I coated the balloons with Clear Wink of Stella.

Please hop on to see what the lovely Annette has to share with us today.

Roll Call

Dana Sullivan (USA) – https://stampinchictn.blogspot.com/2021/08/second-sale-bration-august-stampers.html

Deb Naylor (USA) https://flyingstamper.blogspot.com/2021/08/stampers-showcase-blog-hop.html

Jo Blackman (UK) – https://www.joblackman.com/2021/08/stampers-showcase-second-sale-bration.html

Jessica Brigden (USA) – https://www.jessbcreativecardiology.com/2021/08/delicate-dahlias-in-bumblebee-magenta.html

Melissa Seplowitz (USA) https://thestampingninja.com/second-sale-a-bration-for-the-stampers-showcase-blog-hop

Leonie Stuart (Australia) https://www.stampinginspirationbyleonie.com/2021/08/stampers-showcase-blog-hop-second-sale.html

Rochelle Laird-Smith (Australia) https://wp.me/p9ydMf-2HC

Annette Elias-De Kijkkast (NL) https://dekijkkast.blogspot.com/2021/08/kleurrijke-kaarten-met-delicate-dahlias.html

Mo Rootes (UK) https://wp.me/p73ZP5-1VD

Stacey Marsh (UK) https://www.staceymarsh.co.uk/2021/08/stampers-showcase-august-sale-bration.html

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Watercolor shapes stamp set by Stampi' Up! used for a Masculine thank you card for the Share It Sunday Blog Hop

Masculine Shapes for the Share It Sunday Blog Hop

Posted on August 29, 2021August 26, 2021 by Mo Rootes

Hello and welcome to the Share It Sunday Blog Hop where we are sharing a project we have been working on. I am sharing a masculine shapes card today.

Colours used in this project are:

To recreate the masculine shapes card, you will need:

Mint Macaron card base – 8¼” by 5⅞” scored at 4⅛”
Smoky Slate card – 5½” by 3¾”
Basic White card – 5⅜” by 3⅝”
Basic White card – 5½” by 3¾” for the inside

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

I stamped the large oval in So Saffron ink onto the smaller panel of Basic White, added the thinner oval in Mint Macaron and finally stamping the small circle in Smoky Slate ink.

This pattern, such as it is, was repeated down the length of the panel.

Mint Macaron card base - 8¼” by 5⅞” scored at 4⅛” Smoky Slate card – 5½” by 3¾” Basic White card - 5⅜” by 3⅝” Basic White card – 5½” by 3¾” for the inside

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

The stamped panel was then placed in the Stamparatus and the sentiment, from the Biggest Wish stamp set, was inked up with Basic Gray ink and stamped. I used the Stamparatus so that I could restamp the sentiment to get a darker image.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

The stamped panel was added with Multipurpose Liquid Adhesive to the Smoky Slate panel. The whole piece was then added to the Mint Macaron card base on Dimensionals.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

I decorated the panel using some of the embellishments left over from the Sentimental Rose Card Kit.

www.crafty-rootes.co.uk – A quirky masculine shapes thank you card made using the Watercolor Shapes stamp set for the Share It Sunday Blog Hop

A striking card, I hope you like it.

Please hop on to see what my fellow blog hoppers have to share today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A glass cakestand full of birthday cupcakes for a sweet birthday card, made using Stampin' Up! products

Birthday Cupcakes for the Ink. Stamp. Share Blog Hop

Posted on August 28, 2021August 25, 2021 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share. Blog hop where our theme is ‘Autumn/Winter Catalogue’. I have made a cute birthday cupcake card using the gorgeous Sweets & Treats stamp set. A friend has a cloche cake stand which I love so this stamp set really called to me.

The colours used in this project are:

To recreate the birthday cupcake card, you will need:

Flirty Flamingo card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Mint Macaron – 4⅜” by 3” – rounded upper right corner
Basic White – 4 ¼” by 2⅞” – rounded upper right corner
Pattern Party dsp – 5⅞” by 1¼”
Silver Foil – 5⅞” by ¼”
Basic White – 5½” by 3¾” – rounded upper right corner
Basic White – ½” strip

Using Flirty Flamingo ink, I stamped a row of cupcakes along the bottom of the Flirty Flamingo card base.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I added the strip of Pattern Party dsp using Multipurpose Liquid Adhesive the added the strip of Silver Foil using the same glue.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

The cupcake stand and cloche from the Sweets & Treats stamp set, were stamped in Smoky Slate ink onto the smaller panel of Basic White. The stand was then coloured in using Smoky Slate Blends Markers.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I stamped 2 cupcakes using Smoky Slate ink inside the cloche. I stamped 3 cupcakes on Post It Notes and cut them out with scissors. I used them to mask the 2 cakes I had stamped and stamped a cupcake between. The three cakes were then masked and 2 more cakes were added on top. The cupcakes were coloured using Flirty Flamingo, Mint Macaron, So Saffron, Balmy Blue & Crumb Cake Blends Markers. I coloured the inside of the cloche with the light Pool Party Blends Marker. The stamped panel was added to the Mint Macaron panel wit liquid glue and the panel was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

The sentiment from the same stamp set was stamped on the Basic White strip in Smoky Slate ink and trimmed out and flagged using Scissors. I added a trio of Metallic Pearls to complete the card.

www.crafty-rootes.co.uk – A birthday card featuring a pile of yummy birthday cupcakes made using the Sweets & Treats stamp set for the Ink. Stamp. Share Blog Hop

I love it.

Please continue on to see what Rochelle has to share with us today.

Roll Call

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty evergreen Christmas tree themed card made using the Evergreen Elegance stamp set by Stampin' Up!

Evergreen Christmas Tree card

Posted on August 27, 2021July 22, 2021 by Mo Rootes

I really love Christmas and Christmas crafting and am sharing an evergreen Christmas tree card made using the Evergreen Elegance stamp set paired with the Natural Textiles stamp set and Scalloped Contour Dies.

Colours used in this project are:

To recreate the evergreen Christmas tree card, you will need:

Smoky Slate card base – 8¼” by 5⅞” scored at 4⅛”
Shaded Spruce card – 5⅞” by 3”
Basic White card – 5⅞” by 2¼”
Basic White card – 5½” by 3¾”
Basic Gray card – 2” by 1¼”

I inked up one of the gorgeous background stamps from the Natural Textiles stamp set in Smoky Slate ink. I stamped off twice before stamping the image down the left and right side of the Smoky Slate card front.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I inked the same stamp again with the same ink, stamped off once then stamped onto the strip of Basic White card. I repeated this 3 times covering the whole panel.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

Using the tall tree, I stamped in Shaded Spruce onto the bottom of the stamped strip in 1^st and 2^nd generation ink. This step was repeated to fill up the bottom of the panel.

Using the Scalloped Contour Dies, I cut the scalloped border using the Shaded Spruce card and added it behind the stamped layer using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I wrapped a piece of Silver Mesh Ribbon around the panel and tied it in a bow, securing the bow with a Mini Glue Dot.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

The sentiment from the For Unto Us stamp set (so happy this set has returned) was stamped in Versamark ink onto the small piece of Basic Gray card, covered in White Embossing Powder and heat set using a Heat Tool. I used a Tailor-Made Tag Die to cut out the sentiment, I actually shorted the die cut as it was too long, and added it under the bow with a Mini Glue Dot.

www.crafty-rootes.co.uk – A gorgeous evergreen trees Christmas card made for the Stampers Showcase Blog Hop and using Sale-a-Bration product

I added a trio of Holiday Rhinestones to complete the card. I love it, so pretty.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty Christmas card made for the Ink & Inspirations Blog Hop using the Textures & Frames stamp set by Stampin' Up!

Textured Baubles for the Ink & Inspirations Blog Hop

Posted on August 26, 2021August 8, 2021 by Mo Rootes

Hello and welcome to the Ink & Inspirations Blog Hop where our theme is Clean & Simple and I have chosen to make a card featuring textured baubles made using the Textures and Frames stamp set which is one of the Sale-a-Bration offerings which are free with a £45 order.

Colours used in this project are:

To recreate the textured baubles card, you will need:

Fresh Freesia card base – 8¼” by 5⅞” scored at 4⅛”
Polished Pink card – 5⅛” by 3”
Basic White card – 5” by 2⅞”
Basic White card – 5 ½” by 3 ¾” for the inside
Basic White card – 3” by ⅝”

Taking the smaller panel of Basic White card, I stamped the solid circle image from the Textures & Frames stamp set in Polished Pink ink, I added the open circle image around the outside in the same ink and ended with the stripes, again in the Polished Pink.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

I repeated the stamping with Fresh Freesia ink and So Saffron ink to create the effect of baubles.

The ‘bag’ image from the Penguin Place stamped was stamped on top of each bauble to create the hanger using Smoky Slate ink. Don’t they look great.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

The stamped panel was glued to the layer of Polished Pink card using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

Using Fresh Freesia ink, I stamped the snowflakes from the Penguin Place stamp set onto the Fresh Freesia card front in the upper right and lower left corners. The stamped piece was added onto the card front on Dimensionals.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

The sentiment from the Christmas to Remember stamp set was stamped in Polished Pink ink onto the strip of Basic White card and added it to the card front.

www.crafty-rootes.co.uk – The Textures & Frames stamp set used to make a cute textured baubles card for the Ink & Inspirations Blog Hop

Such a sweet card, not my original idea. I saw the bauble idea in a post by Michelle A Pollard in one of our demonstrator sites and would like to thank her for the inspiration.

Please hop on to see what the other talented demos have to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The So Many Snowflakes dies, border dies and Simply Elegant dsp by Stampin' Up! used for a pretty Christmas card

Pretty Snowflakes card

Posted on August 22, 2021August 7, 2021 by Mo Rootes

Here is a pretty snowflakes card made using the So Many Snowflakes Dies and some of the lovely Simply Elegant designer Series Paper.

Colours used in this project are:

To recreate the pretty snowflakes card, you will need:

Basic White – 5⅞” by 3¾”
Simply Elegant dsp – 5⅞” by 2½”
Basic White 3” by 1”
Scrap Pool Party, Misty Moonlight & Fresh Freesia

Using the Basic Border Dies and my Stampin’ Cut & Emboss Machine I die cut a decorative border from the panel of Basic White card. This die cut piece was then embossed using the Tasteful Textiles Embossing Folder.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

Using Multipurpose Liquid Adhesive, I added the strip of Simply Elegant dsp to the Thick Basic White card base. The die cut panel was then added using the same liquid glue.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I used the So Many Snowflakes Dies and the scrap Pool Party, Misty Moonlight and Fresh Freesia card to die cut a selection of the smaller snowflakes.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I laid the snowflakes along the die cut edge, allowing them to overlap and adhered them with the liquid glue. I covered the snowflakes with Clear Wink of Stella to add a little shimmer.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

The sentiment from the Poinsettia Petals stamp set was stamped onto the ½” strip of Basic White card in Misty Moonlight ink. I added a small border of Pool Party card and added the piece to the card front on Dimensionals.

www.crafty-rootes.co.uk – A many snowflakes themed Christmas card made using the So Many Snowflakes dies, Border Dies and Simply Elegant dsp

I added a scattering of Silver Metallic Pearls to complete the card.

So pretty, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Peaceful deer bundle and Peaceful Prints dsp by Stampin' Up! used for a pretty Christmas card

Stunning Leaping Deer card

Posted on August 20, 2021August 7, 2021 by Mo Rootes

Here is simple but stunning leaping deer Christmas card made using the Peaceful Deer stamp set and coordinating Deer Builder die and Peaceful Prints dsp.

Colours used in this project are:

To recreate the stunning leaping deer card, you will need:

Evening Evergreen card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Peaceful Prints dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 4½” by 3” – rounded upper left corner
Be Dazzling Speciality dsp – 5⅞” by ⅜”
Basic White card – ¼” strip
Basic White card – 5½” by 3¾” – rounded upper left corner

The panel of Peaceful Prints dsp was glued to the largest panel of Basic White card using Multipurpose Liquid Adhesive. I used the same glue to adhere the panel to the Evening Evergreen card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The strip of the gorgeous Be Dazzling Speciality dsp across the centre of the card. I love the shimmer this gives.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

Using Evening Evergreen ink, I stamped a selection of trees from the Peaceful Deer stamp set in 1^st and 2^nd generation ink. The stamped panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

I used the Deer Builder Punch to cut out one of the pretty deer images from the Peaceful Prints dsp and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The sentiment was stamped in Cherry Cobbler ink onto the strip of Basic White card, flagged the end and added it to the card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

To finish the card, I added a bow made from White Baker’s Twine using a Mini Glue Dot. A trio of Champagne Rhinestones was added to complete the card.

I hope you like it,

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x