Stampin' Up! Meadow Dies coloured with Sponge Daubers to make a stunning thank you card

Colorful Meadow for the Technique Tuesday Blog Hop

Posted on May 4, 2021May 4, 2021 by Mo Rootes

Hello and welcome to the Technique Tuesday Blog Hop where we are sharing a colouring technique. I have made a lovely Colorful Meadow card using the Meadow Dies. You are currently with Mo Rootes from near Cambridge in the UK.

Colours used in this project are:

To recreate the colourful meadow card, you will need:

Smoky Slate card base – 8¼” by 5⅞” scored at 4 ⅛” – Rounded upper left corner
Poppy Parade – 5” by 3 ¼” – Rounded upper left corner
Basic White – 4⅞” by 3⅛” – Rounded upper left corner
Basic White – 5½” by 3¾” – Rounded upper left corner
Scrap Basic White

Taking the smaller Basic White panel and the spotty stamp from the Quiet Meadow stamp set I randomly stamped in Smoky Slate ink. I die cut a number of the Meadow Dies from scrap Basic White.

www.crafty-rootes.com -The stunning Meadow Dies used with Sponge Daubers to make a pretty thank you card

Using Sponge Daubers, I added colour to each flower. I used Old Olive and Just Jade inks for the stems and leaves. The larger flower was coloured using Poppy Parade and Cherry Cobbler and the smaller flower coloured with Bumblebee and Poppy Parade. I dabbed the colour on and carefully and lightly sponged it over the die cut taking care not to bend or tear the fragile die cut pieces.

www.crafty-rootes.com -The stunning Meadow Dies used with Sponge Daubers to make a pretty thank you card

The flowers were added to the stamped background using Multipurpose Liquid Adhesive which I applied using my Silicon Mat and a piece of Sponge.

www.crafty-rootes.com -The stunning Meadow Dies used with Sponge Daubers to make a pretty thank you card

The stamped layer was added to the Poppy Parade layer with the same liquid glue. I wrapped a piece of Linen Thread around the layers tying it in a bow. The panel was then mounted onto the Smoky Slate card base on Dimensionals.

www.crafty-rootes.com -The stunning Meadow Dies used with Sponge Daubers to make a pretty thank you card

I stamped a sentiment from the Hydrangea Haven stamp set in Poppy Parade ink onto scarp Basic White card. I die cut it using the sweet little label from the Meadow Dies and added it to the card front.

www.crafty-rootes.com -The stunning Meadow Dies used with Sponge Daubers to make a pretty thank you card

To finish the card, I added a trio of Red Rhinestones.

Please continue on to see what the other fabulous hoppers have to share with us today.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A Pot of Succulents

Posted on April 30, 2021April 25, 2021 by Mo Rootes

Today I am sharing a thank you card made using the Simply Succulents stamp set and Potted Succulent Dies.

Colours used to make this project are:

To recreate the pot of succulent’s card, you will need:

Mint Macaron – 5⅞” by 5⅝” – scored at 4⅛” – rounded lower right corner
Very Vanilla – 5⅝” by 3¾” – rounded lower right corner
Smoky Slate – 5⅜” by 3⅜” – rounded lower right corner
Very Vanilla – 5⅛” by 3⅛” – rounded lower right corner
Ornate Garden dsp – 5⅝” by 1⅜”
Scrap Very Vanilla

I began by adding all the layers to the card base using Multipurpose Liquid Adhesive. The strip of Ornate Garden dsp to the front of the card, the larger panel of Very Vanilla card was added to the inside.

The Simply Succulents stamp et and the Potted Succulents dies used to make a pretty thank you card

www.crafty-rootes.com -A thank you card featuring a pot of succulents and using Stampin’ Up! products

The smaller Very Vanilla panel was added to the Smoky Slate panel using the same liquid glue and was then added to the front panel of the card.

www.crafty-rootes.com -A thank you card featuring a pot of succulents and using Stampin’ Up! products

The pot of succulent’s image was stamped in Smoky Slate onto scrap Very Vanilla card and die cut using the Potted Succulent Dies and the Stampin’ Cut & Emboss Machine.

www.crafty-rootes.com -A thank you card featuring a pot of succulents and using Stampin’ Up! products

I used the following Blends Alcohol Markers to colour in the image – Smoky Slate and So Saffron for the pot. Mint Macaron, Just Jade, Purple Posy, Rich Razzleberry, So Saffron and Seaside Spray for the plants.

www.crafty-rootes.com -A thank you card featuring a pot of succulents and using Stampin’ Up! products

A piece of Linen Thread was wrapped around the top of the pot and tied in a bow. The pot was added to the card front on Dimensionals. The die cut plants were then added also on Dimensionals.

www.crafty-rootes.com -A thank you card featuring a pot of succulents and using Stampin’ Up! products

The sentiment was stamped in Basic Gray ink onto scrap Very Vanilla card and fussy cut using Scissors and added with liquid glue to the card front.

To complete the card, I added a trio of Holiday Rhinestones.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A bright and cheerful tree themed thank you card for the Global Design Project challenge #225

Beautiful Trees for the Global Design Project #225

Posted on April 28, 2021May 4, 2021 by Mo Rootes

Today I am playing with the Global Design Project#225 colour challenge. I love a colour challenge and the colours this time are so bright and cheerful. I have made a card using the new Beautiful Trees dies and the Beauty of Friendship stamp set.

Challenge Colours:

Coastal Cabana

Magenta Madness

Bumblebee

To recreate the Beautiful Trees card, you will need

Magenta Madness card base – 8¼” by 5⅞” scored at 4 – Rounded upper left corner
Basic Black – 5½” by 3¾” – Rounded upper left corner
Basic White – 5⅜” by 3⅝” – Rounded upper left corner x 2, one for the inside
Scrap Magenta Madness, Coastal Cabana, Bumblebee and Basic Black

I stamped the bare tree image from the gorgeous Beauty of Nature stamp set in Magenta Madness ink onto Magenta Madness card and again in Coastal Cabana ink onto Coastal Cabana ink onto Coastal Cabana card and finally in Bumblebee ink onto Bumblebee card.

www.crafty-rootes.com -Beautiful Tree dies and Beauty of Friendship stamp set used for the Global Design Project #225

These images were the die cut using the Stampin’ Cut & Emboss Machine and the Beautiful Trees dies.

www.crafty-rootes.com -Beautiful Tree dies and Beauty of Friendship stamp set used for the Global Design Project #225

Using the same machine, I ran through one of the Basic White card panels with the Painted Texture Embossing Folder. I used Multipurpose Liquid Adhesive to add the embossed panel to the Basic Black layer.

The whole panel was then glued to the Magenta Madness card front using the same liquid glue.

www.crafty-rootes.com -Beautiful Tree dies and Beauty of Friendship stamp set used for the Global Design Project #225

The Magenta Madness and Bumblebee trees were glued directly to the card front and the Coastal Cabana tress was added with Dimensionals. I added the ‘ground’ image in 3^rd generation Bumblebee ink.

www.crafty-rootes.com -Beautiful Tree dies and Beauty of Friendship stamp set used for the Global Design Project #225

The sentiment was stamped in Versamark ink onto scrap Basic Black card, covered it in White Embossing Powder and Heat seat with my Heat Tool. I trimmed it out with scissors and added it to the card front with liquid glue.

www.crafty-rootes.com -Beautiful Tree dies and Beauty of Friendship stamp set used for the Global Design Project #225

To complete the card, I added a trio of Woven Thread Sequins,

Such a colourful card, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty seashell themed card made for the Ink. Stamp. Share sketch challenge blog hop

Seashells for the Ink. Stamp. Share. Blog Hop

Posted on April 24, 2021April 21, 2021 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share blog hop where we have a sketch challenge. I love a sketch challenge as they often push me out of my comfort zone and have used the sketch to make a sweet Seashells themed thank you card.

Colours used in this project are:

To recreate the Seashells card, you will need:

Pool Party card base – 8¼” by 5⅞” scored at 4
Fine Art Gallery dsp – 5⅞” by 2”
Basic White – 5⅝” by ½”
Night of Navy – 4” by 2”
Basic White – 4” by 2”
Basic White – 5½” by 3¾”
Scrap Basic White

I used Multipurpose Liquid Adhesive to glue the Fine Art Gallery dsp to the Pool Party card base. I stamped the sentiment from the Friends Are Like Seashells stamp set in Night of Navy ink onto long strip of Basic White strip. And used the same glue to add it to the card front.

www.crafty-rootes.com – Friends Are Like Seashells stamp set used for the Ink. Stamp. Share. sketch challenge blog hop.

Using the Banner Triple Punch to flag the 2” strips of Night of Navy and Basic White card and trimmed them down to the size I wanted using my Paper Trimmer. These were adhered together with the liquid glue and added flat to the card front.

www.crafty-rootes.com – Friends Are Like Seashells stamp set used for the Ink. Stamp. Share. sketch challenge blog hop.

I stamped the seashells in either Night of Navy ink or Bermuda Bay ink onto the scrap Basic White card.

www.crafty-rootes.com – Friends Are Like Seashells stamp set used for the Ink. Stamp. Share. sketch challenge blog hop.

The shells were then die cut using the Seaside Shell Dies and embossed using the Seashells 3D Embossing Folder, I covered the seashells in Clear Wink of Stella.

www.crafty-rootes.com – Friends Are Like Seashells stamp set used for the Ink. Stamp. Share. sketch challenge blog hop.

I stamped the foliage onto the Basic White banner and added the sand dollar with liquid glue. The other 2 shells were added on Dimensionals.

www.crafty-rootes.com – Friends Are Like Seashells stamp set used for the Ink. Stamp. Share. sketch challenge blog hop.

Using the dark Night of Navy Blends Marker I coloured in a trio of Basic Rhinestones and added them to the card front to complete the card.

Please hop on to see what the lovely Rochelle has to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Dandy Wishes

Posted on April 13, 2021April 7, 2021 by Mo Rootes

I have been playing with the Dandy Wishes Dies today, working on ideas for a class in the mail and came up with this sweet card.

Colours used in this project are:

To recreate the Dandy Wishes card, you will need:

Balmy Blue card base – 8¼” by 5⅞” scored at 4⅛”
Basic White – 4½” by 3½”
Basic White – 5½” by 3¾” – for the inside
Scrap Basic Black, Balmy Blue, Old Olive and Daffodil Delight

Using the 3 flower dies from the Dandy Wishes dies I cut lots of Balmy Blue flowers from scrap card. I used Multipurpose Liquid Adhesive to glue these to the Balmy Blue card base, trimming off the excess with scissors.

www.crafty-rootes.com The Dandy Wishes die set used to make a sweet thank you card

Using the Stitched So Sweetly Dies I cut a large Stitched Rectangle from the smaller Basic White panel and added it to the card base with Dimensionals.

www.crafty-rootes.com The Dandy Wishes die set used to make a sweet thank you card

The leaves and dandelion clock were die cut from scrap Old Olive and Basic Black card. These were added to the stitched rectangle with the liquid glue.

www.crafty-rootes.com The Dandy Wishes die set used to make a sweet thank you card

I die cut the same flowers from scrap Daffodil Delight card and used my Bone Folder to give the petals some shape. The same liquid glue was used to adhere the flower layers together.

I die cut the stem from Old Olive card and glued it to the back of the dandelion flower before adding it to the card front.

www.crafty-rootes.com The Dandy Wishes die set used to make a sweet thank you card

The sentiment from the Art Gallery stamp set was stamped on scrap Basic White card and trimmed out with scissors and added to the card front.

www.crafty-rootes.com The Dandy Wishes die set used to make a sweet thank you card

To complete the card, I added a Matte Black Dot.

Really pretty card but too much die cutting for a class, most of my ladies would rebel!!!. I hope you like it

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies Used

A lovely whale & fishes thank you card made for the Kylie Bertucci Demonstrator Blog Hop and made using the Whale Done stamp set

Whale & Fishes for the Kylie Bertucci Demonstrator Training Blog Hop

Posted on April 12, 2021April 4, 2021 by Mo Rootes

Thank you for joining me for the Kylie Bertucci Demonstrator Training Blog Hop. I have made a whale & fishes’ thank you card to share with you today.

Colours used in this project are:

To recreate the whale & fishes’ card, you will need:

Thick Basic White – 8¼” by 5⅞” scored at 4⅛”
Basic White – 4” by 3”
Scrap Misty Moonlight, Pacific Point, Balmy Blue, So Saffron and Basic White

Using my Paper Trimmer, I cut the scrap Misty Moonlight, Pacific Point, Balmy Blue and So Saffron card into uneven strips, wider at one end than the other. These were then glued to the Basic White panel using Multipurpose Liquid Adhesive. The panel was then run through the Stampin’ Cut & Emboss Machine with the Stitched So Sweetly Dies.

I stamped the whale image in Misty Moonlight ink onto scrap Basic White and punched it out using the Whale Builder Punch. I kept the punched out ‘water spout’

www.crafty-rootes.com – A whale & fishes thank you card made using the Whale Done stamp set for the Kylie Bertucci Demonstrator Blog Hop

The sentiment from the same stamp set was added to the bottom of the Thick Basic White card base in Pacific Point ink.

www.crafty-rootes.com – A whale & fishes thank you card made using the Whale Done stamp set for the Kylie Bertucci Demonstrator Blog Hop

I added the sweet shoals of fish to the card front using So Saffron ink and added the striped panel over top.

www.crafty-rootes.com – A whale & fishes thank you card made using the Whale Done stamp set for the Kylie Bertucci Demonstrator Blog Hop

The whale was added with liquid glue at the head end and Dimensionals at the back. The water sprout was added with the liquid glue.

www.crafty-rootes.com – A whale & fishes thank you card made using the Whale Done stamp set for the Kylie Bertucci Demonstrator Blog Hop

To complete the card I added a Holiday Rhinestone to the eye of the whale. Isn’t it sweet.

www.crafty-rootes.com – A whale & fishes thank you card made using the Whale Done stamp set for the Kylie Bertucci Demonstrator Blog Hop

Please hop on to see what the other talented demos have to share with us today

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Floating & Fluttering

Posted on March 30, 2021March 23, 2021 by Mo Rootes

A sweet butterfly themed thank you card made using the Floating and Fluttering stamp set and Fluttering dies.

Colours used in this card are:

To recreate the Floating and Fluttering card, you will need:

Highland Heather card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Pool Party – 5¼” by 3½” – rounded upper left corner
Basic White – 5” by 3¼” – rounded upper left corner
Basic White – 5⅜” by 3⅝” – rounded upper left corner
Basic White – 4” by 3¼”

I started by using a Blending Brush to apply some Pool Party ink to the 5¼” by 3½” panel of Basic White and added some Pool Party speckles using a stamp from the Sweet Ice Cream stamp set.

www.crafty-rootes.co.uk – Floating & Fluttering stamp set and Fluttering dies used to make a sweet thank you card

The sentiment stamp from the Art Gallery stamp set was stamped in Gorgeous Grape ink. The whole panel was added to the Pool Party Layer using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – Floating & Fluttering stamp set and Fluttering dies used to make a sweet thank you card

The large butterfly image was stuck on the plate of my Stamparatus. I inked it up with Memento Tuxedo Black ink and stamped onto the smallest piece of Basic White card. I like to use the Stamparatus so that I can stamp the image multiple times to get a really dark impression.

www.crafty-rootes.co.uk – Floating & Fluttering stamp set and Fluttering dies used to make a sweet thank you card

I used the infill stamps to add colour. Largest butterfly in Blushing Bride ink, the smallest butterfly in Highland Heather ink, the medium butterfly in So Saffron ink. All the foliage was stamped in Pear Pizzazz ink.

www.crafty-rootes.co.uk – Floating & Fluttering stamp set and Fluttering dies used to make a sweet thank you card

The stamped and coloured image was die cut using the Fluttering dies and the Stampin’ Cut & Emboss Machine.

www.crafty-rootes.co.uk – Floating & Fluttering stamp set and Fluttering dies used to make a sweet thank you card

The die cut image was added on Dimensionals to the card front. I added a trio of Pastel Pearls to complete the card.

A simple and pretty card.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A stunning, shimmery pearl pink seashell card made using Stampin' Up! products

Pearl Pink Shells

Posted on March 26, 2021March 18, 2021 by Mo Rootes

Today I am sharing a gorgeous pearl pink shells thank you card made using the Seashells 3D Embossing Folder and the Seaside Seashells Dies

Colours used in this project are:

Gray Granite

Petal Pink

Basic White

To recreate the pearl pink shells card, you will need:

Gray Granite card base – 8¼” by 5⅞” – scored at 4⅛”
Gray Granite – 5¾” by 4”
Petal Pink – 5⅞” by 4⅛”
Basic White – 5⅜” by 3⅝”
Scrap Basic White

This is such a simple card to make. I started by filling a Stampin’ Spritzer bottle with 70% Isopropyl Alcohol and added a pea sized blob of Frost White Shimmer Paint. After shaking it well I sprayed the Petal Pink card layer all over and set it aside to dry. The shimmer is stunning.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

When the Petal Pink panel was dry. I ran it through the Stampin’ Cut & Emboss Machine using the Seaside Seashell dies.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

The die cut piece was then positioned in the Seashells 3D Embossing Folder and run through the Stampin’ Up! Cut & Emboss Machine again. The texture is amazing.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I added the embossed shimmery die cut to the panel of Gray Granite card using Multipurpose Liquid Adhesive. The panel was then added to the Gray Granite card base with Dimensionals.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I stamped the sentiment from the Sweet Strawberry stamp set in Gray Granite ink onto scrap Basic White card. It was trimmed out using scissors and added to the card front with the liquid glue.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I added a bow using the Snail Mail Twine and a trio of Elegant Faceted Dots to complete the card.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A gorgeous gold leafed hydrangea made using the Hydrangea Haven Stamp set by Stampin' Up!

Golden Hydrangea for the Kylie Bertucci Demo Blog Hop

Posted on March 15, 2021March 15, 2021 by Mo Rootes

Hello and welcome to my blog. My name is Mo Rootes from Cambridge in the UK and I am thrilled to be taking part in this blog hop with fellow demonstrators, from around the world, who are part of Kylie Bertucci’s demonstrator training program. The theme for the hop is ‘Thank You’ and I am sure you will find lots of inspiration as you hop along with us

You may be starting here or have come from another blog – either way you can find the hop list at the bottom of this post so please hop along with us today.

Colours used in today’s project are:

To recreate the gold leafed hydrangea you will need:

Flirty Flamingo – 8¼” by 5⅞” scored at 4⅛” – rounded upper left and lower right corners
Gold Foil – 5 ½” by 3 ¾” – rounded upper left and lower right corners
Merry Merlot – 5⅜” by 3⅝” – rounded upper left and lower right corners
Very Vanilla – 5⅜” by 3⅝” – rounded upper left and lower right corners for the inside
Scrap Very Vanilla

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

Using the Stamparatus I stamped the gorgeous hydrangea image in Versamark ink onto the panel of Merry Merlot – I did this twice – then covered it in Heat and Stick Powder.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

I set the powder using my Heat Tool before covering the sticky image with Gold Gilding Flakes. I used my fingers and a piece of Stampin’ Sponge to rub in the Gold Gilding Flakes, removing the excess.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

The stamped layer was then added to the Gold Foil Panel using Multipurpose Liquid Adhesive and then to the card front on Dimensionals.

I stamped the sentiment in Merry Merlot ink onto scrap Very Vanilla card and used the small tag from the Hydrangea Dies and the Mini Stampin’ Cut & Emboss Machine to die cut the sentiment out.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

I added the tag to the card front with a Mini Glue Dot and added a bow of twine from the Forever Greenery Ribbon pack.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

Such a pretty card. I hope you like it

Please hop on to see what the other demos have to share today.

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used

A thank you card made using the Potted Succulent dies and Art Gallery designer series paper

Potted Succulents

Posted on March 5, 2021February 28, 2021 by Mo Rootes

Here is a pretty thank you card featuring the Potted Succulents dies and the Art Gallery Designer Series Paper.

The colours used in this project are:

To recreate the potted succulent card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper right corner
Pool Party – 5⅝” by 3⅞” – rounded upper right corner
Fine Art Floral dsp – 5 ½” by 3 ¾” – rounded upper right corner
Scrap Basic White, Soft Sea Foam & Old Olive

I used Multipurpose Liquid Adhesive to glue the Fine Art Floral dsp to the Pool Party panel. A length of Sheer Pool Party Ribbon was wrapped around the layers before the whole piece was added with the same glue to the Thick Basic White card base.

www.crafty-rootes.com – A lovely potted succulents thank you card using the Simply Succulents bundle by Stampin’ Up!

I stamped the sweet flower pot in Cinnamon Cider ink onto scrap Basic White card, I used the Cinnamon Cider Blends Markers to colour in the pot adding strips using Pool Party Blends.

www.crafty-rootes.com – A lovely potted succulents thank you card using the Simply Succulents bundle by Stampin’ Up!

I stamped the two flowers in Old Olive ink, one on scrap Basic White and the other on scrap Soft Sea Foam. I coloured the white one in using the Petal Pink Blends.

www.crafty-rootes.com – A lovely potted succulents thank you card using the Simply Succulents bundle by Stampin’ Up!

All the stamped and coloured pieces were then die cut using the Potted Succulents dies and my Stampin’ Cut & Emboss Machine. I also die cut some aloe from scrap Old Olive card and the other succulent from Soft Sea Foam scrap.

www.crafty-rootes.com – A lovely potted succulents thank you card using the Simply Succulents bundle by Stampin’ Up!

I added Dimensionals to the back of the sweet pot and tucked the succulents in and around and placed the whole piece onto the front of the card.

www.crafty-rootes.com – A lovely potted succulents thank you card using the Simply Succulents bundle by Stampin’ Up!

The sentiment was stamped in Old Olive ink and die cut using one of the Tasteful Label dies before it was added to the card base with Mini Glue Dots. I also tucked in a bow using the Shimmer Ribbon. To complete the card I added a scattering of Gold Metallic Pearls.

Such a pretty card, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x