The Peaceful deer bundle and Peaceful Prints dsp by Stampin' Up! used for a pretty Christmas card

Stunning Leaping Deer card

Posted on August 20, 2021August 7, 2021 by Mo Rootes

Here is simple but stunning leaping deer Christmas card made using the Peaceful Deer stamp set and coordinating Deer Builder die and Peaceful Prints dsp.

Colours used in this project are:

To recreate the stunning leaping deer card, you will need:

Evening Evergreen card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Basic White card – 5⅝” by 3⅞” – rounded upper left corner
Peaceful Prints dsp – 5½” by 3¾” – rounded upper left corner
Basic White card – 4½” by 3” – rounded upper left corner
Be Dazzling Speciality dsp – 5⅞” by ⅜”
Basic White card – ¼” strip
Basic White card – 5½” by 3¾” – rounded upper left corner

The panel of Peaceful Prints dsp was glued to the largest panel of Basic White card using Multipurpose Liquid Adhesive. I used the same glue to adhere the panel to the Evening Evergreen card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The strip of the gorgeous Be Dazzling Speciality dsp across the centre of the card. I love the shimmer this gives.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

Using Evening Evergreen ink, I stamped a selection of trees from the Peaceful Deer stamp set in 1^st and 2^nd generation ink. The stamped panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

I used the Deer Builder Punch to cut out one of the pretty deer images from the Peaceful Prints dsp and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

The sentiment was stamped in Cherry Cobbler ink onto the strip of Basic White card, flagged the end and added it to the card front.

www.crafty-rootes.co.uk – A cute ‘leaping deer’ Christmas card made using the Peaceful Deer stamp set, Deer Builder Punch and Peaceful Prints dsp

To finish the card, I added a bow made from White Baker’s Twine using a Mini Glue Dot. A trio of Champagne Rhinestones was added to complete the card.

I hope you like it,

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

You’re Amazing

Posted on August 17, 2021August 6, 2021 by Mo Rootes

Here is the cute and quirky ‘you’re amazing’ card designed for members of my team who have triggered a reward voucher for their sales and/or recruiting. I love making these cards and giving something back to my team for their some of their achievements.

Colours used in this project are:

To recreate the you’re amazing card, you will need:

Pale Papaya card base 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner – x 2 – one for the inside
Scrap Basic White card
Scrap strips of Pansy Petals dsp

Using the Timeworn Type Embossing Folder and the Stampin’ Cut & Emboss Machine, I embossed one of the Basic White panels and stuck it on the Pale Papaya card front with Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

I added some strips of Seal + adhesive to a piece of scrap Basic White card and added the strips of Pansy Petals dsp. I used the Layering Circle dies to cut a circle out of the striped piece of card. This was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

The sweet sheep image was stamped in Memento Tuxedo Black ink onto scrap Basic White card. It was die cut using the Sheep dies.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

I used the following Blends Marker Pens to add some colour to the sheep – Smoky Slate, Petal Pink and Ivory. The sheep was added to the card front with liquid glue at the top and Dimensionals at the bottom.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

The sentiment was stamped in the same Memento Tuxedo Black ink onto scrap Basic White card and trimmed out with Scissors. I added it to the card front with liquid glue.

www.crafty-rootes.co.uk – Counting Sheep stamp set and Sheep Dies used for a quirky ‘you’re amazing’ team achievement card

A trio of Genial Gems was added to finish the card. Lovely.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a prettty note of thanks car

Note of Thanks card for the Kylie Bertucci Demo Training Blog Hop

Posted on August 16, 2021July 16, 2021 by Mo Rootes

Here is a little note of thanks made using the pretty Season’s Blessings stamp set for the Kylie Bertucci demo training blog hop. Hello and welcome to my blog and to this months hop. I hope you will hop on to see what inspirations my demo friends have to share with us today.

Colours used in this project are:

To recreate the note of thanks card, you will need:

Daffodil Delight card base – 8¼” by 5⅞” scored at 4⅛” – rounded lower left and upper right corners
Poppy Parade card – 5⅜” by 3⅝” – rounded lower left and upper right corners
Basic White card – 5¼” by 3½” – rounded lower left and upper right corners
Basic White card – 5½” by 3¾” – rounded lower left and upper right corners – for the inside
Basic White card – 3½” by 2½”

I chose a die from the Tasteful Labels Dies, placed it in the centre of the 5¼” by 3½” panel of Basic White and drew round the inside lightly with a pencil. This helps with placement of the flowers and leaves.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a prety note of thanks card

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I selected three flowers and 2 leaves from the Season’s Blessings stamp set. The largest flower was stamped in Poppy Parade ink, slightly over lapping the drawn shape. I added the next flower in Daffodil Delight and the smallest flower in Highland Heather ink.

The leaves were stamped in Just Jade and Garden Green.

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

Next, I added the flower centres in either Poppy Parade or Daffodil Delight and used the same flower centre in Highland Heather to add purple dots around the grouping of flowers. The whole panel was then glued to the Poppy Parade layer with Multipurpose Liquid Adhesive. I wrapped White Baker’s Twine twice around the panel, securing it on the back with Sellotape. The panel was then added to the Daffodil Delight card base with glue.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a pretty note of thanks car

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

Using my Mini Cut & Emboss Machine I die cut the chosen label from the small piece of Basic White. I stamped the sentiment in Highland Heather ink in the centre of the label and added it to the stamped panel on Dimensionals.

Season's Blessings stamp set and Tasteful Labels Dies by Stampin' Up! used to make a pretty note of thanks card

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I added a double bow, made using the White Baker’s Twine to the side of the die cut label and added a trio of Gold Metallic Pearls to complete the card.

www.crafty-rootes.co.uk – A pretty floral note of thanks card made using the Season’s Blessings stamp set and Tasteful Labels Dies

I hope you like it. Please hop on to see what my fellow demos have to share with us today.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Purple Dahlia

Posted on August 15, 2021August 6, 2021 by Mo Rootes

I am sharing a pretty purple dahlia thank you card today, made using the gorgeous Delicate Dahlia stamp set which is one of the free choices, with a £90 order, from the Sale-a-Bration Brochure.

Colours used in this project are:

To recreate the purple dahlia card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Gorgeous Grape card – 4⅝” by 3⅛” – rounded upper right corner
Basic White card – 4½” by 3” – rounded upper right corner
2021 – 2023 In Color dsp – 5⅞” by 2”
Be Dazzling Speciality Paper – 5⅞” by ½”

Using Multipurpose Liquid Adhesive, I added the strip of Be Dazzling Speciality dsp to the piece of 2021 – 2023 In Color dsp then added them to the Thick Basic White card base.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

I stamped the outline of the dahlia in Highland Heather ink and stamped it on the panel of Basic White card. I inked the infill stamp in Fresh Freesia ink and added Highland Heather ink and Gorgeous Grape ink to the inked image using Sponge Daubers and stamped it inside the outline image.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

The leaves were added in Garden Green ink, full strength for the outline and 2^nd generation (stamped off once) for the infill. The sentiment from the Arctic Bear stamp set was added in Gorgeous Grape ink.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

The stamped panel was added with the same liquid glue to the Gorgeous Grape panel.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

I wrapped a length of Sheer Gorgeous Grape Ribbon around the panel and the panel was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A pretty purple dahlia thank you card made using the Delicate Dahlia stamp set by Stampin@ Up!

To finish the card, I added a bow made from the same ribbon and a trio of Pastel Pearls.

Love the purple dahlia, so pretty. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A fun card made using the Party Patterns dsp and a selection of fonts from Stampin' Up! stamp sets for the Stamping INKSpirations Blog Hop

FONTS-amental for the Stamping INKSpirations Blog Hop

Posted on August 14, 2021August 15, 2021 by Mo Rootes

Hello and welcome to the Stamping INKSpirations Blog Hop where we our theme is FONTS-amental. I love a good font and I especially love combining fonts which is so trendy right now.

Colours used in this project are:

To recreate the feels like home card, you will need:

Party Patterns dsp – 5⅝” by 3⅞”
Party Patterns dsp – 4½” by 2½”
Basic White card – 4½” by 2½”
Basic White card – 5½” by 3¾” – for the inside
Scrap Bermuda Bay card

The larger panel of Party Patterns Designer Series Paper (dsp) was glued to the Misty Moonlight card front using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

I selected the sentiments I thought would work together and ended up choosing from the following stamp sets – One Happy Family, Hey Birthday Chick, Garden Wishes, Elegantly Said & Season’s Blessings. I wanted a mixture of plain and quirky fonts.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

I stamped the sentiments onto the die cut tag, cut using the Tailor Made tags Dies and my Mini Cut & Emboss Machine using Bermuda Bay, Misty Moonlight, Night of Navy, Soft Succulent inks.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

Using the same die, I cut another tag from the smaller piece of Party Patterns dsp and glued the two tags together, offset, using the same liquid glue.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

A small hole re-enforcer was die cut using the same set of dies and added to the tag with the liquid glue. The Soft Succulent Open Weave Ribbon was the pushed through the hole and secured. The tag was then added to the card front on Dimensionals.

www.crafty-rootes.co.uk – A quirky card featuring birthday sentiments in a multitude of fonts for the Stamping INKSpirations Blog Hop

I added a trio of Holiday Rhinestones to complete the card.

I am really happy with how the card came out, great for a teenager. I hope you like it.

Please hop on to see what the lovely Shel has to share with us today.

Angie McKenzie ● Rochelle Laird-Smith ● Karen Henderson

Leonie Stuart ● Jessie Holton ● Jo Blackman

Cheryl Hamilton ● Libby Fens ● Tricia Butts

Mo Rootes ● Shel Anderson ● Elaine de Montmorency

Teri West ● Susan Simpson ● Aurélie Fabre

Gez Carpenter ● Deb Macdowell ● Jill Chapman

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The new Feels Like Home stamp set by Stampin' Up! used to make a pretty water coloured card

Feels Like Home for the Ink. Stamp. Share Blog Hop

Posted on August 14, 2021August 12, 2021 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing something we have been working on. I have chosen to use the Feels Like Home stamp set, a free choice from the Sale-A-Bration brochure with a £45 order, and a bit of water colouring.

Colours used in this project are:

To recreate the feels like home card, you will need:

Blushing Bride card base – 8¼” by 5⅞” scored at 4⅛”
Basic Gray card – 5⅛” by 3⅝”
Fluid 100 Watercolor card – 5” by 3½”
Very Vanilla card – 5½” by 3¾”

Using the Stamparatus, I stamped the image in Basic Gray ink. I find I get a better image using the Stamparatus especially on this textured paper.

I like to use the lid of my inkpads as my palette, either by squeezing the pad to the lid or adding a drop of re-inker directly into the lid and adding water.

www.crafty-rootes.co.uk – A beautiful water coloured card made using the Feels Like Home stamp set by Stampin’ Up!

Using a Water Painter, I added a light wash of water to the tree, then added Old Olive ink and allowed it to spread. I moved on to paint the wall in the same way with Blushing Bride ink

www.crafty-rootes.co.uk – A beautiful water coloured card made using the Feels Like Home stamp set by Stampin’ Up!

The door was painted using Poppy Parade ink and the door surround and decking in Smoky Slate. The window in the door was coloured using Bumblebee ink.

www.crafty-rootes.co.uk – A beautiful water coloured card made using the Feels Like Home stamp set by Stampin’ Up!

The plant pots were painted with Misty Moonlight ink and the leaves and flowers added using Old Olive, Blushing Bride and Poppy Parade ink. The basket and seat of the bike were coloured with Soft Suede ink

I used my Soft Suede Stampin’ Write maker to define the door panels and the tree branches and used a Misty Moonlight Stampin’ Write Marker to draw in the bicycle.

www.crafty-rootes.co.uk – A beautiful water coloured card made using the Feels Like Home stamp set by Stampin’ Up!

I debated where to place a sentiment and finally decided to stamp it on the inside panel. The sentiment came from the Heartfelt Wishes stamp set, I love the fonts in this stamp set, gorgeous.

www.crafty-rootes.co.uk – A beautiful water coloured card made using the Feels Like Home stamp set by Stampin’ Up!

A pretty card, I hope you like it.

Please hop on to see what the lovely Tricia has to share with us today.

Roll Call

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A great masculine card made using the Welcoming Woods stamp set by Stampin' Up! and some ink blending

Welcoming Woods for the Stamp ‘n Hop Blog Hop

Posted on August 13, 2021August 13, 2021 by Mo Rootes

Hello and welcome to the Stamp ‘n Hop Blog Hop where it is all about the males today. I have chosen to use the Welcoming Woods stamp set to make my card. Whether you have hopped over from Cheryl’s blog, loved her project or have started with me, please continue to hop to see what inspiration others have to share today.

Colours used in this project are:

To recreate the welcoming woods card, you will need:

Soft Suede card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Balmy Blue card – 4¾” by 3⅜” – rounded upper left corner
Basic White card – 4½” by 3⅛” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner – for the inside
Basic White card – ¼” strip

I stamped the tree trunks from the Welcoming Woods stamp set in Soft Suede ink onto the smaller panel of Basic White. I love all the texture and definition you get in this image; the trunks look so real.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

The ‘ground’ was stamped in 2^nd generation Soft Suede ink to give the effect of an horizon.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

I punched a circle using the 1” Circle Punch, placed it over the tree trunks to provide a ‘moon’. Using a Blending Brush I added Balmy Blue ink, lightly from the horizon line to the top of the card. I kept the colour light as I wanted a wintery sky effect. The masked circle was then removed.

The ground was coloured with a Blending Brush and Crumb Cake ink and I added the speckles from the Friends Are Like Seashells stamp set in 2^nd and 3^rd generation Soft Suede ink to give the ground some texture. The stamped panel was added to the Balmy Blue layer with Multipurpose Liquid Glue.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

Using Soft Suede ink, I stamped the leaves from the Welcoming Woods stamp set onto the Soft Suede card front and added the stamped panel on Dimensionals.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

The sentiment from the Art Gallery stamp set was stamped on the strip of Basic White card and trimmed down and flagged with Scissors before I was added to the card.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

I simple but striking card, I hope you like it.

Please hop on to see what the lovely Gez Carpenter has to share with us today.

www.crafty-rootes.co.uk – The Welcoming Woods stamp set used for a masculine themed card for the Stamp ‘n Hop Blog Hop

Vicky Wright – Australia – https://wp.me/p4cXCG-6pu

Cheryl Taylor – UK – https://cheryldiana.co.uk/male-birthday-cards/

Mo Rootes – UK – https://wp.me/p73ZP5-1Yf

Gez Carpenter – UK– https://www.nigezza.co.uk/2021/08/stamp-n-hop-august-blog-hop-its-all.html

Karen Egan – UK – https://craftykarendesigns.blogspot.com/2021/08/all-about-males-stamp-n-blog-hop.html

Donna Lester – https://taffycrafting.blogspot.com/2021/08/simply-elegant-card-for-good-man.html

Victoria Littlewood – https://vickieloudesigns.blogspot.com/2021/08/ahoy-there-matey-pirate-birthday-card.html

Annette Elias – NL – https://dekijkkast.blogspot.com/2021/08/stoere-mannenkaarten-met-welcoming.html

Rochelle Laird-Smith – https://wp.me/p9ydMf-2Ek

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Nature’s Harvest

Posted on August 13, 2021August 6, 2021 by Mo Rootes

I am loving the new Nature’s Harvest stamp set; those coneflowers are absolutely gorgeous and great for those of us who like to colour.

Colours used in this project are:

To recreate the Nature’s Harvest card, you will need:

Basic Gray card base – 8¼” by 5⅞” scored at 4⅛”
Smoky Slate card – 5½” by 3¾”
Pansy Petals dsp – 4½” by 3¾”
Basic White card – 4½” by 3¾”
Basic White card – 5½” by 3¾”
Scrap Basic White

Using the speckled, grungy stamp from the Nature’s Harvest stamp set, I stamped in 2^nd generation Smoky Slate ink onto the Smoky Slate panel, concentrating on the edges of the panel as the centre will be hidden. The panel was then adhered to the Basic Gray card front with Multipurpose Liquid Glue.

www.crafty-rootes.co.uk -The Nature’s Harvest stamp set used to make a pretty coneflower themed thank you card

I put a couple of strips of Tear and Tape down the centre of the inked panel and laid, in a zig zag, a long strip of the Organdy Striped Ribbon,

www.crafty-rootes.co.uk -The Nature’s Harvest stamp set used to make a pretty coneflower themed thank you card

The coneflower image was stamped in Basic Gray ink onto the smaller piece of Basic White card and die cut using the largest scalloped rectangle from the Stitched So Sweetly Dies.

The image was coloured using the following Blends Alcohol Markers – Smoky Slate, Calypso Coral and Petal Pink.

www.crafty-rootes.co.uk -The Nature’s Harvest stamp set used to make a pretty coneflower themed thank you card

I used the same texture stamp and 2^nd generation Petal Pink ink to add some background colour. The panel was then added to the Pansy Petal dsp with liquid glue and the whole panel added to the card front on Dimensionals.

www.crafty-rootes.co.uk -The Nature’s Harvest stamp set used to make a pretty coneflower themed thank you card

The sentiment was stamped in Basic Gray on scrap Basic White and trimmed out using Scissors. I added a trio of Elegant Faceted Gems to complete the card.

www.crafty-rootes.co.uk -The Nature’s Harvest stamp set used to make a pretty coneflower themed thank you card

I love the coral tones with the gray, so soft and delicate looking.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Pile of Presents

Posted on August 10, 2021August 3, 2021 by Mo Rootes

The Delivering Cheer stamp set was still out on my desk and I chose to use it to make a birthday card featuring a pile of presents.

Colours used in this project are:

To recreate the pile of presents card, you will need:

Mint Macaron card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper right corner
Blushing Bride card – 4⅝” by 3¼” – rounded upper right corner
Basic White card – 4½” by 3⅛” – rounded upper right corner
Basic White card – 5½” by 3¾” – rounded upper right corner – for the inside
Hand-penned dsp strips – 4⅓” by ⅜” x 3
Basic White card – ½” strip
Hand-penned dsp scrap

Using Multipurpose Liquid adhesive, I glued the 3 strips of Hand-penned dsp to the Mint Macaron card front.

www.crafty-rootes.co.uk – A gorgeous birthday card made using the Delivering Cheer stamp set by Stampin’ Up!

I stamped the ladies’ legs and skirt in Memento Tuxedo Black ink onto the smaller Basic White panel and added the pile of presents on top in the same ink. I added the ‘ground’ in the same black ink.

The skirt was then stamped onto a scrap of Hand-penned dsp and fussy cut out. I added it with the liquid glue onto the stamped image, love a bit of paper piecing..

www.crafty-rootes.co.uk – A gorgeous birthday card made using the Delivering Cheer stamp set by Stampin’ Up!

The pile of presents was coloured using the following Blends Markers – Mint Macaron, Daffodil Delight, Highland Heather and the retired Pink Pirouette, the arms and legs were coloured with the Ivory Blends Marker.

www.crafty-rootes.co.uk – A gorgeous birthday card made using the Delivering Cheer stamp set by Stampin’ Up!

The stamped and coloured panel was added with liquid glue to the Blushing Bride panel and the whole piece was then added to the Mint Macaron card base on Dimensionals.

www.crafty-rootes.co.uk – A gorgeous birthday card made using the Delivering Cheer stamp set by Stampin’ Up!

The sentiment from the Sweet As A Peach stamp set was stamped in Highland Heather ink onto the ½” strip of Basic White card and trimmed out and flagged using Scissors. The card was completed with a trio of Pastel Pearls.

www.crafty-rootes.co.uk – A gorgeous birthday card made using the Delivering Cheer stamp set by Stampin’ Up!

Such a soft, pretty card. I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty sailing diaroma made using Stampin' Up! products for the Colour Combo Blog Hop

Sailing Diorama card for the Colour Combo Blog Hop

Posted on August 8, 2021August 3, 2021 by Mo Rootes

Hello and welcome to the Colour Combo blog hop where I have made a sailing diorama using this months colours which are:

Gray Granite

Gorgeous Grape

Bermuda Bay

And I have added a tiny bit of Daffodil Delight for the light of the lighthouse

Daffodil Delight

To recreate the Sailing Diorama card, you will need:

Bermuda Bay card base – 8¼” by 5⅞” scored at 4⅛”
Gray Granite card – 5½” by 3¾”
Basic White card – 5⅜” by 3⅝”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White card

I began by using the Layering Diorama dies and my Stampin’ Cut & Emboss Machine to cut the centre from the 5⅜” by 3⅝” panel of Basic White. I put the centre piece to one side.

www.crafty-rootes.co.uk – A Sailing Diorama card made for the Colour Combo Blog Hop and using the Sailing Home and Mountain Air stamp sets

Using Blending Brushes, I added Gray Granite ink to the bottom of the outer panel and Bermuda Bay ink to the upper part of the outer panel. I added some texture to the bottom using the dotty image from the Quiet Meadow stamp set and Gray Granite ink.

www.crafty-rootes.co.uk – A Sailing Diorama card made for the Colour Combo Blog Hop and using the Sailing Home and Mountain Air stamp sets

Taking the inner piece I stamped the mountains, from the Mountain Air stamp set in Gray Granite ink and muddied the bottom using the small ‘cloud’ image from the Mountain Air stamp set in 2^nd and 3^rd generation Gray Granite. The sea and sky were both inked with Bermuda Bay ink, I just went lighter with the sky and added a 1” circle mask for the moon. The sea texture was added using a stamp from the Arctic Bears stamp set in Bermuda Bay. I place the 2 pieces of inked card together and stamped some birds, from the Mountain Air stamp set, randomly in the sky.

www.crafty-rootes.co.uk – A Sailing Diorama card made for the Colour Combo Blog Hop and using the Sailing Home and Mountain Air stamp sets

The inner piece was then glued to the Gray Granite panel using Multipurpose Liquid Adhesive. And the outer piece added on Dimensionals.

www.crafty-rootes.co.uk – A Sailing Diorama card made for the Colour Combo Blog Hop and using the Sailing Home and Mountain Air stamp sets

Using the Stamparatus, I stamped the lighthouse, from the Sailing Home stamp set in Gray Granite ink and repeated the step to get a slightly darker colour. I used a Blender Pen to add ink and to smooth out the colour a little. I also added a little Daffodil Delight ink as a lighthouse is nothing without a light! The lighthouse was added with glue and Dimensionals overlapping the inset panel.

www.crafty-rootes.co.uk – A Sailing Diorama card made for the Colour Combo Blog Hop and using the Sailing Home and Mountain Air stamp sets

The smaller boat from the Sailing Home stamp set was stamped in Gorgeous Grape ink and coloured with the Blender Pen and ink. The boat was added onto the inset layer with liquid glue.

Such a sweet card. I hope you like it.

Please hop on to see what the lovely Vickie Littlewood has to share with us today.