A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

Balmy Christmas card

I have used the pretty Wisteria Wishes stamp set and a bit of masking to make a balmy Christmas card.

Colours used in this card are:

 

To recreate the balmy Christmas card, you will need:

Balmy Blue card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded upper left corner
Basic White card – 5” by 3⅜” – rounded upper left corner
Shaded Spruce card – 4⅝” by 3⅛” – rounded upper left corner
Basic White card – 4½” by 3” – rounded upper left corner
Basic White card – 5½” by 3¾” – rounded upper left corner
Scrap Balmy Blue & Basic White card

 

I took a piece of copy paper and tore a wavy line from side to side. I then moved the copy paper down the page adding Balmy Blue ink along the edge with a Blending Brush to create the illusion of snowbanks.

 

A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The Wisteria Wishes stamp set used to create a pretty balmy Christmas card using a masking technique and some blending.

I then used the copy paper to mask off the snow banks whilst I stamped the ‘trees’ in Shaded Spruce ink.

 

A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The Wisteria Wishes stamp set used to create a pretty balmy Christmas card using a masking technique and some blending.

The stamped panel was glued to the Shaded Spruce panel with Multipurpose Liquid Adhesive.

 

A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The Wisteria Wishes stamp set used to create a pretty balmy Christmas card using a masking technique and some blending.

I wrapped a length of Glittered Organdy Ribbon around the 5” by 3⅜” piece of Basic White card and tied a bow on the right side. The stamped panel was then added with liquid glue and the whole panel was mounted onto the Balmy Blue card front on Dimensionals.

 

A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The Wisteria Wishes stamp set used to create a pretty balmy Christmas card using a masking technique and some blending.

The sentiment, from the Snowman Magic stamp set was stamped on scrap Basic White card in Balmy Blue ink and die cut using the Holly Berry Dies. I die cut the same label form scarp Balmy Blue card. Cut it in half and added it to the back of the stamped label. The label was the glued to the card front and a trio of Iridescent Pearls completed the card.

 

A pretty balmy Christmas card made using a masking technique and some blending along with the Wisteria Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The Wisteria Wishes stamp set used to create a pretty balmy Christmas card using a masking technique and some blending.

I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

Robin on a Branch for the Christmas Stampathon

I have been making Christmas cards today for the Christmas Stampathon and out theme this month is ‘Birds & Branches’. I have created a robin perched on a branch card using the Perched in a Tree stamp set.

Colours used in this project are:

 

 

To recreate the robin on a branch card, you will need:

Balmy Blue card base – 8¼” by 5⅞” scored and folded at 4⅛”
Soft Suede card – 5⅜” by 3⅝”
Fitting Florets dsp – 5¼” by 3½”
Basic White card – 4” by 3”
Basic White strip – ⅜” wide
Basic White card – 5½” by 3¾” – for the inside
Scrap Soft Suede

 

Using Multipurpose Liquid Adhesive, I added the dsp to the Soft Suede panel and wrapped a piece of Red Ribbon around the panel, securing it on the back with Sellotape. The panel was then glued to the Balmy Blue card front using the same liquid glue.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

Using the Framed Florets Dies, I die cut an oval from the smaller panel of Basic White card. I stamped the bird on the die cut oval, saving the frame for another project.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

I used the following Blends Pens to colour in the image – Poppy Parade, Pumpkin Pie, Pale Papaya, Gray Granite and Crumb Cake.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

From the Aspen Dies I cut a branch from the scrap Soft Suede card and glued it to the oval, beneath the bird. The oval was then added to the card front on Dimensionals.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

The sentiment from the Framed & Festive stamp set was stamped in Soft Suede onto the strip of Basic White card. I flagged the end and trimmed it down before adding it to the card front with liquid glue.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

A trio of Red Rhinestones completed the card. As per the Christmas Stampathon rules I made 4 of these cards. I hope you like them.

 

Five lovely Christmas cards made for the Christmas Stampathon using the pretty Perched In A Tree stamp set and Aspen Dies by Stampin' Up!

www.crafty-rootes.co.uk -The pretty Perched In A Tree stamp set and Aspen Dies used to make five lovely Christmas cards for the Christmas Stampathon

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

Rainbow Snowflakes for the Stamping With Friends Blog Hop

Here is a pretty rainbow snowflakes card made using the lovely Joyful Flurry stamp set for the Stamping with Friends Blog Hop where our theme is simple stamping.

Colours used in this project are:

 

To recreate the rainbow snowflakes card, you will need:

Parakeet Party card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded lower right corner
Orchid Oasis card – 5 ½” by 3 ¾” – rounded lower right corner
Basic White card – 5⅜” by 3⅝” – rounded lower right corner
Basic White card – 5 ½” by 3 ¾” – rounded lower right corner – for the inside

 

I began by stamping my chosen snowflake in Polished Pink ink onto the smaller panel of Basic White card.

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set used to make a beautiful rainbow snowflakes Christmas card for the Stamping with Friends Blog Hop

The stamp was then cleaned, inked with Sweet Sorbet ink and stamped again.

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set used to make a beautiful rainbow snowflakes Christmas card for the Stamping with Friends Blog Hop

I repeated this step stamping next in Daffodil Delight ink, then Parakeet Party ink, Tahitian Tide ink and finally Orchid Oasis ink. The sentiment was stamped in Orchid Oasis.

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set used to make a beautiful rainbow snowflakes Christmas card for the Stamping with Friends Blog Hop

The stamped panel was glued to the Orchid Oasis panel using Multipurpose Liquid Adhesive. It was then added to the Parakeet Party card base using the same glue.

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set used to make a beautiful rainbow snowflakes Christmas card for the Stamping with Friends Blog Hop

A Basic Rhinestone was added to the centre of each snowflake to complete the card.

 

A beautiful rainbow snowflakes Christmas card made for the Stamping with Friends Blog Hop using the Joyful Flurry stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set used to make a beautiful rainbow snowflakes Christmas card for the Stamping with Friends Blog Hop

Please hop along to see what simple stamping projects my crafty friends have to share with us today.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

3 cards for the November classes using the beautiful Joyful Flurry stamp set and Frosted Flurry Dies by Stampin' Up!

Joyful Flurry card made for November Classes

Today I am sharing the cards I designed for November’s classes using the Joyful Flurry stamp set and Frosted Flurry Dies.

Colours used in this project are:

 

Card 1 – Snowflake Wreath card

Parakeet Party card base 8½” by 4¼”– scored at 4¼” – rounded upper left corner
Orchid Oasis – 4⅛” by 4⅛” – rounded upper left corner
BW – 4” by 4” x 2 – rounded upper left corner
Orchid Oasis ⅜” strip
Wonderful Snowflake

 

3 cards for the November classes using the beautiful Joyful Flurry stamp set and Frosted Flurry Dies by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set and Frosted Flurry Dies used to make 3 cards for the November classes

We used the Stamparatus to stamp each of the snowflakes to create the wreath.

Each snowflake was stamped 4 times, rotating the panel of Basic White card 45° between each stamping.  I created a template for making the wreath using Square Dies and some window sheet.

The stamped panel was then glued to the Orchid Oasis and then to the Parakeet Party card base.

We added a Wonderful Snowflake and the sentiment which was embossed in white on the strip of Orchid Oasis card.

Card 2 – Brushed Background card

Tahitian Tide card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper left corner
Orchid Oasis card – 5⅝” by 3⅞” – rounded upper left corner
Basic White 5½” by 3¾” x 2 – rounded upper left corner
Orchid Oasis ⅜” strip
Scrap Basic White

 

3 cards for the November classes using the beautiful Joyful Flurry stamp set and Frosted Flurry Dies by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set and Frosted Flurry Dies used to make 3 cards for the November classes

This card is a sneak peek of the card I designed as my swap card for OnStage Live in Vienna next week. Full instructions will be on my blog on the 12th November.

Card 3 – Joyful Wishes

Orchid Oasis card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper right corner
Tahitian Tide card – 5⅜” by 3⅝” – rounded upper right corner
Basic White – 5¼” by 3½” – rounded upper right corner
Orchid Oasis card – 2½” by 2½”
Basic White card – 2½” by 2½”
Basic White – 5½” by 3¾”
Tahitian Tide Metallic Woven Ribbon

 

3 cards for the November classes using the beautiful Joyful Flurry stamp set and Frosted Flurry Dies by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set and Frosted Flurry Dies used to make 3 cards for the November classes

We stamped the snowflakes down the left side of the Basic White panel, starting with the largest. We wrapped the ribbon around the panel before sticking it to the Tahitian Tide Layer. The whole piece was then added to the Orchid Oasis card base.

The sentiment was stamped in Orchid Oasis ink onto the Basic White circle and the scalloped circle added behind. A bow and a scattering Iridescent Rhinestones completed the card.

 

3 cards for the November classes using the beautiful Joyful Flurry stamp set and Frosted Flurry Dies by Stampin' Up!

www.crafty-rootes.co.uk – The beautiful Joyful Flurry stamp set and Frosted Flurry Dies used to make 3 cards for the November classes

I hope you like the cards.

 Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

Birthday Florets card for the Fitting Florets Blog Hop

Hello and welcome to the Fitting Florets Blog Hop where we are using the new Fitting Florets collection to make a card. I decided to make my card using only the Framed Florets stamp set to make my project.

Colours used in this project are:

 

To recreate the birthday florets card, you will need:

Flirty Flamingo card base – 8¼” by 5⅞” scored and folded at 4⅛” – rounded lower right corner
Old Olive card – 5⅝” by 3⅞” – rounded lower right corner
Basic White card – 5½” by 3¾” x 2 – rounded lower right corner, one for the outside
Old Olive card – 3¾” by 1¼”

 

Using Post It tape I masked off a strip about 1¼” deep across one of the panels of Basic White card. I stamped above and below the mask, overlapping the masking tape.

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The framed Florets stamp set used to make a pretty floral birthday card for the Fitting Florets Blog Hop

I used Memento Tuxedo Black ink and I started with the larger leafy spray. The larger flower was stamped next, then the smaller flower followed by the pair of leaves and the sprig of berries.

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The framed Florets stamp set used to make a pretty floral birthday card for the Fitting Florets Blog Hop

The following Blends Pens were used to colour in the images – Petal Pink, Flirty Flamingo, Pumpkin Pie, Mint Macaron and Old Olive. The masking tape was then removed and the panel glued to the Old Olive layer. I used the same glue to adhere the panel onto the Flirty Flamingo card base.

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The framed Florets stamp set used to make a pretty floral birthday card for the Fitting Florets Blog Hop

I stamped the sentiment from the Go To Greetings stamp set with Versamark ink, covered it with White Embossing Powder and heat set it. I added it where the masking tape had been using Dimensionals.

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The framed Florets stamp set used to make a pretty floral birthday card for the Fitting Florets Blog Hop

A scattering of Fine Sparkle Gems completed the card.

 

A pretty floral birthday card made for the Fitting Florets Blog Hop using the framed Florets stamp set by Stampin' Up!

www.crafty-rootes.co.uk -The framed Florets stamp set used to make a pretty floral birthday card for the Fitting Florets Blog Hop

I love sets with lots of little images. I hope you like the card.

Please hop on the share the inspiration provided by my crafty friends.



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

Window Wishes for a new home card

Today I have made 2 congratulations cards for my sister-in-law and her husband and my nephew and his wife who are all about to move home. I used the Window Wishes stamp set to make the cards.

Colours used in this project are:

 

To recreate the window wishes cards you will need:

A card base – I used Starry Sky and Shaded Spruce – 8¼” by 5⅞” scored and folded at 4⅛”
A matting layer – I used Evening Evergreen and Shaded Spruce – 5⅛” by 3⅜”
Basic White card – 5” by 3¼”
Basic White card – 5½” by 3¾” – for the inside
Basic White – ⅜” strip

 

I stamped the bare tree in Soft Suede ink onto the smaller panel of Basic White card.

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Window Wishes stamp set by Stampin’ Up! used to make two congratulations on your new home cards

The house was stamped in either Evening Evergreen or Starry Sky ink and the roofs added in Soft Suede.

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Window Wishes stamp set by Stampin’ Up! used to make two congratulations on your new home cards

The ‘ground was added using Crumb Cake ink and the fir trees with Shaded Spruce ink. Using Blending Brushes, I added a little Crumb Cake ink to the ground and Balmy Blue ink to the sky.

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Window Wishes stamp set by Stampin’ Up! used to make two congratulations on your new home cards

The sentiment from the Art Gallery stamp set was stamped in Shaded Spruce ink onto the strip of Basic White, trimmed down and added to the stamped panel with Multipurpose Liquid Adhesive.

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Window Wishes stamp set by Stampin’ Up! used to make two congratulations on your new home cards

Liquid glue was used to adhere the stamped panel to the matting layer and the whole piece was added to the card base on Dimensionals.

 

Congratulations on your new home cards made using the Window Wishes stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Window Wishes stamp set by Stampin’ Up! used to make two congratulations on your new home cards

I hope they like the cards.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

Fitting Florets used for the Crafty Sketch Challenge Blog Hop

Hello and welcome to the Crafty Challenge Blog Hop where we are sharing projects inspired by a sketch. I have used the pretty new Fitting Florets collection of products to make my card.

Colours used in this project are:

 

To recreate the pretty florets card, you will need:

Thick Basic White card base – 8¼” by 5⅞” scored and folded at 4⅛”
Fitting Florets dsp – 5⅞” by 3½”
Sweet Sorbet card – 5⅞” by ⅛”
Basic White card – 3¼” by 3¼”
Scrap Basic White card

 

Using Multipurpose Liquid Adhesive, I glued the Fitting Florets dsp to the Thick Basic White card base. I added the strips of Sweet Sorbet card.

 

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

www.crafty-rootes.co.uk – The stunning new Framed Florets stamp set and co-ordinating Dies plus the Fitting Florets dsp used to make a card for the Crafty Challenge Blog Hop

I used the Layering Circle Dies to die cut a circle from the square of Basic White card. The sentiment from the Framed Florets stamp set was stamped onto the die cut circle in Evening Evergreen ink.

 

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

www.crafty-rootes.co.uk – The stunning new Framed Florets stamp set and co-ordinating Dies plus the Fitting Florets dsp used to make a card for the Crafty Challenge Blog Hop

The small cluster of blossoms was stamped onto scrap Basic White card in Evening Evergreen ink. I coloured the image using Sweet Sorbet, Soft Succulent and Evening Evergreen Blends pens. The image was then die cut using the Framed Florets Dies.

 

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

www.crafty-rootes.co.uk – The stunning new Framed Florets stamp set and co-ordinating Dies plus the Fitting Florets dsp used to make a card for the Crafty Challenge Blog Hop

The floral spray was then added to the die cut circle using the same liquid Adhesive. The circle was then mounted onto the card front on Dimensionals.

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

www.crafty-rootes.co.uk – The stunning new Framed Florets stamp set and co-ordinating Dies plus the Fitting Florets dsp used to make a card for the Crafty Challenge Blog Hop

A trio of Red Rhinestones completed the card.

 

A card made for the Crafty Sketch Challenge Blog Hop using the Fitting Florets collection of product by Stampin' Up!

www.crafty-rootes.co.uk – The stunning new Framed Florets stamp set and co-ordinating Dies plus the Fitting Florets dsp used to make a card for the Crafty Challenge Blog Hop

I love a sketch challenge, it really makes you look at your stamps, dsp etc in a different way.

Please hop on to share the inspiration provided by my demo friends.

 

Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

Grassy Grove Easel card for the Stampers Showcase Blog Hop

Hello and welcome to the Stampers Showcase Blog Hop where we are sharing Autumn or Halloween themed Projects. I have chosen to share a card made for my son-in-law’s birthday made using the Grassy Grove stamp set and Grove Dies.

Colours used in this project are:

 

To recreate the grassy grove easel card, you will need:

Pool Party card base – 5½ by 8¼” – scored at 4⅛” and 2 and 1/16”
Early Espresso card – 5¼” by 3⅝”
Pool Party card – 5⅛” by 3½”
Fluid 100 card – 5⅛” by 3½”
Early Espresso card – 5⅜” by 3⅞”
Basic White card – 5¼” by 3½”
Scrap Early Espresso

 

I used a Water Painter to dampen the panel of Fluid 100 paper. I then added Garden Green ink to the top and Soft Suede ink to the bottom and set it aside to dry.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

Once the panel was dry, I die cut it using the Grove Dies. I added Mossy Meadow ink to the tree canopy using the Water Painter and Soft Suede ink to add shadows to the tree trunks. The ground was added with Garden Green ink. I die cut 2 deer from scrap Early Espresso card and added them to the panel on Dimensionals.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

Using pieces of Dimensionals I added the watercolor piece to the Pool Party layer. The whole piece was then mounted onto the 5¼” by 3⅝” piece of Early Espresso.  The panel was then glued to the front of the card base using liquid glue only on the bottom of the panel.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

I die cut the number 3 and 0 from scrap Early Espresso card, I repeated it until I had three of each. Each number was glued to its mates and then glued to the panel of Basic White card.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

The word ‘today’ was stamped in Early Espresso ink next to the 30 and trees stamped next to it in Garden Green ink. A trio of Brushed Metallic Dots completes the card.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

Cute card. I hope you like it.

 

An easel card for Stampers Showcase Blog Hop made using the Grassy Grove stamp set and Grove Dies by Stampin' Up!

www.crafty-rootes.co.uk – The Grassy Grove stamp set and Grove Dies used to make an easel card for Stampers Showcase Blog Hop

 

Please hop on to share the projects created by my friends.



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

Mint Poinsettia card for the Stamp ‘n Hop Blog Hop

Hello and welcome to the Stamp ‘n Hop Blog Hop where our theme is ‘anything goes’ and I have chosen to share a mint poinsettia card made recently using scraps of the Boughs of Holly designer Series Paper (dsp) left over from another project.

Colours used in this project are:

 

To recreate the shaded poinsettia Christmas card, you will need:

Mint Macaron card base – 8¼” by 5⅞” scored and folded at 4⅛”
Mint Macaron card – 5½” by 3¾”
Boughs of Holly dsp – 3½” by 3½”
Basic White card – 3” by 3”
Basic White card – 5½” by 3¾”
Scrap Boughs of Holly dsp
Basic White strip ¼” wide

 

I die cut a large scalloped circle from the gorgeous Boughs of Holly dsp, placed it onto the Mint Macaron card front to get an idea for position then I stamped around it with a tree from the Trees For Sale stamp set and Mint Macaron ink.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

A slightly smaller circle was die cut from the square of Basic White card.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

I fussy cut one of the pretty poinsettias from the Boughs of Holly dsp and added it to the Basic White circle with liquid glue. The circles were then adhered together with Multipurpose Liquid Adhesive and added to the card front on Dimensionals.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

The sentiment from the Penguin Place stamp set was stamped in Cherry Cobbler ink onto the ¼” strip of Basic White card and the words cut apart and added with liquid glue to the circle.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

The whole piece was then added to the card front with the same liquid glue.

A trio of Adhesive Backed Sequins completed the card.

 

A pretty Christmas card for the Share It Sunday Blog Hop made using The Trees for Sale stamp set combined with the Boughs of Holly dsp by Stampin' Up!

www.crafty-rootes.co.uk – The Trees for Sale stamp set combined with te Boughs of Holly dsp makes a pretty Christmas card for the Share It Sunday Blog Hop

Please hop over to see what my stamping friends have been working on recently.

 



Blog Hop Index


Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours!  If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one.  To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

Layered Florets for a team challenge

Our latest team challenge is ‘Texture’ and I have created a pretty layered card using the Framed Florets stamp set and dies and the Fitting Florets dsp.

Colours used in this project are:

 

To recreate the layered florets card, you will need:

Evening Evergreen card base – 8¼” by 5⅞” scored and folded at 4⅛”
Blushing Bride card – 5½” by 3⅝”
Fitting Florets dsp – 5⅜” by 3½”
Basic White card – 5½” by 1”
Blushing Bride card – 4¼” by 3¼”
Basic White card – 4¼” by 3¼”
Basic White card – 5½” by 3¾” for the inside
Scrap Basic White & Soft Succulent

Using Multipurpose Liquid Adhesive, I glued the Fitting Florets dsp to the larger Blushing Bride panel. I die cut the pretty scalloped border from the strip of Basic White card and glued it to the right side of the panel of dsp and added it to the Evening Evergreen card base.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

I die cut the ovals, frame and inner piece from both the Blushing Bride and Basic White 4¼” by 3¼” panels.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

The sentiment was stamped in Evening Evergreen ink onto the Basic White oval, turned it face down, added the Blushing Bride embossed frame around it and adhered the two together with Dimensionals. It was added to the card front.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

I die cut the duo of flowers from the Fitting Florets dsp with the Framed Florets Dies and glued it using liquid glue to the bottom of the oval.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

Using the same dies I die cut a selection of leaves from the scrap Basic White and Soft Succulent card and tucked them in around the flowers.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

 

A white Baker’s Twine Bow and a trio of Pastel Pearls completed the card.

 

The Framed Florets stamp set and dies used to make a pretty layered floral card for a team challenge

www.crafty-rootes.co.uk -A pretty layered floral card made using the Framed Florets stamp set and dies for a team challenge

I think it is really pretty. I hope you like it.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.
Details of the products I used for this project can be found below.
Mo x

Supplies used: