A pretty card made using the Masterfully Made designer Series Paper and the Patchwork Dies by Stampin' Up!

Masterfully Patchworked card

Posted on June 20, 2023June 13, 2023 by Mo Rootes

The Masterfully Made designer series paper was still out on my desk, so I decided to try out the new Patchwork Dies and make a card.

Colours in this project are:

To recreate the patchwork card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Berry Burst – 5½” by 3¾” – trimmed down later
Masterfully Made dsp – 5¼” by 3¼”
Basic White card – 2¾” by 1¼”

Using the Patchwork Dies, I die cut the panel of Masterfully Made dsp.

www.crafty-rootes.co.uk – The Masterfully Made designer Series Paper used with the Patchwork Dies to make a pretty card

I placed the die cut pieces onto the panel of Berry Burst card and adhered them down using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Masterfully Made designer Series Paper used with the Patchwork Dies to make a pretty card

The panel was then cut down using my Paper Trimmer, leaving a border of about ¼” all the way around.

www.crafty-rootes.co.uk – The Masterfully Made designer Series Paper used with the Patchwork Dies to make a pretty card

The panel was then mounted onto the Thick Basic White card base on Dimensionals.

www.crafty-rootes.co.uk – The Masterfully Made designer Series Paper used with the Patchwork Dies to make a pretty card

I stamped the sentiment from the Dainty Delights stamp set in Azure Afternoon ink and die cut it using the Deckled Rectangle Dies and added it to the card front.

www.crafty-rootes.co.uk – The Masterfully Made designer Series Paper used with the Patchwork Dies to make a pretty card

An Azure Afternoon ribbon bow and a trio of Pastel Adhesive-backed Sequins completed the card.

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK, please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty floral card made for the Crafty Challenge Blog Hop using the Dainty Delight stamp set by Stampin' U

Dainty Delight flowers for the Crafty Challenge Blog Hop

Posted on June 19, 2023June 13, 2023 by Mo Rootes

Hello and welcome to the Crafty Challenge Blog Hop where we are working with a sketch/colour challenge. I have chosen to make my card using the colours but as Pale Papaya and Pacific Point have retired, I have swapped these for Petal Pink and Azure Afternoon. I also changed Cajun Craze to Copper Clay. I have made my card using the Dainty Delight stamp set.

Colours used in this card are:

Azure Afternoon card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper right corner
Copper Clay card – 5⅛” by 3⅜” – rounded upper right corner
Basic White card – 5” by 3¼” – rounded upper right corner
Basic White card – 5½” by 3¾” – rounded upper right corner
Scrap Basic White & Petal Pink

Using Copper Clay ink, I stamped the largest floral image from the Dainty Delight stamp set onto the 5” by 3¼” panel of Basic White.

A pretty floral card made for the Crafty Challenge Blog Hop using the Dainty Delight stamp set by Stampin' Up!

www.crafty-rootes.co.uk – The Dainty Delight stamp set used to make a pretty floral card for the Crafty Challenge Blog Hop

I used the following Blends Pens to colour in the image – Petal Pink, Copper Clay, Tahitian Tide & Copper Clay.

www.crafty-rootes.co.uk – The Dainty Delight stamp set used to make a pretty floral card for the Crafty Challenge Blog Hop

I added Petal Pink ink to the panel using a Blending Brush. The decorated panel was then glued to the Copper Clay layer.

www.crafty-rootes.co.uk – The Dainty Delight stamp set used to make a pretty floral card for the Crafty Challenge Blog Hop

A piece of Petal Pink Ribbon from the duo pack was wrapped around the panel and secured on the back with Sellotape. The panel was then mounted onto the Azure Afternoon card base on Dimensionals.

www.crafty-rootes.co.uk – The Dainty Delight stamp set used to make a pretty floral card for the Crafty Challenge Blog Hop

The sentiment was stamped on scrap Basic White card in Tahitian Tide ink and punched it out using the Double Oval Punch. I used the same punch to punch out the slightly larger scalloped oval from scrap Petal Pink card. I glued the 2 ovals together and added them to the card front using Mini Glue Dots.

www.crafty-rootes.co.uk – The Dainty Delight stamp set used to make a pretty floral card for the Crafty Challenge Blog Hop

A trio of 2023 – 2025 In Color Dots completed the card.

Please hop on to share the inspiration provided by my crafty friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty botanical trio birthday card made using the gorgeous Botanical Layers stamp set by Stampin' Up!

Botanical Trio Card

Posted on June 18, 2023June 11, 2023 by Mo Rootes

I have used the pretty Botanical Layers stamp set to make a pretty botanical trio birthday card.

Colours used to make this card:

To recreate the botanical trio card, you will need:

Berry Burst card base – 8¼” by 5⅞” – scored at 4⅛”
Lost Lagoon card – 5⅜” by 3⅝”
Basic White card – 5¼” by 3½”
Basic White card – 5½” by 3¾” – For the inside
Berry Burst card – 5¼” by ½”
Lost Lagoon card – 5¼” by ⅛”

Using the smaller leafy image from the Botanical Layers stamp set I stamped in Berry Burst ink in the centre of the panel about 1¼” from the bottom.

www.crafty-rootes.co.uk – The Botanical Layers stamp set used to make a pretty botanical trio birthday card

I stamped the image again, to the left in Lost Lagoon ink and to the right in Copper Clay ink.

www.crafty-rootes.co.uk – The Botanical Layers stamp set used to make a pretty botanical trio birthday card

Using the Copper Clay ink, I stamped the sentiment from the Artistically Inked stamp set along the bottom of the panel.

www.crafty-rootes.co.uk – The Botanical Layers stamp set used to make a pretty botanical trio birthday card

Place the stamped panel into the Timeworn Type Embossing Folder leaving the ⅝” strip where the sentiment is stamped outside the folder.

www.crafty-rootes.co.uk – The Botanical Layers stamp set used to make a pretty botanical trio birthday card

The strip of Berry Burst card was glued above the stamped sentiment and the thin strip of Lost Lagoon added below.

A length of Elegant Trim was wrapped around the panel and secured on the back with Sellotape and the panel was glued to the Lost Lagoon panel with liquid glue.

www.crafty-rootes.co.uk – The Botanical Layers stamp set used to make a pretty botanical trio birthday card

A double Elegant Trim bow and a scattering of Festive Pearls completed the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

An accordion fold card made using the Masterfully Made designer series paper and Textured Floral stamp set by Stampin' Up! for the Stamping With Friends Blog Hop

Masterfully Made Accordion Fold Card for the Stamping With Friends Blog Hop

Posted on June 17, 2023June 11, 2023 by Mo Rootes

Hello and welcome to the Stamping With Friends Blog Hop where, this month we are showcasing accordion fun fold cards. I have made my card using the gorgeous Masterfully Made designer Series Paper and the Textured Floral stamp set.

Colours featured in this card are;

To recreate the masterfully made accordion card, you will need:

Pretty Peacock card base – 11” by 5⅞” – scored at 1¼”, 4” & 6¾”
Basic White card – 5⅝” by 4”
Basic White card – 5⅝” by 2½” x 2
Basic White card – 5⅝” by 1⅛”
Masterfully Made dsp – 5½” by 3⅞
Masterfully Made dsp – 5½” by 2 ½”
Masterfully Made dsp – 5 ½” by 1”
Lost Lagoon card – 11” by 1”
Basic White card – 2½” by 2½”

Using Multipurpose Liquid Adhesive, I glued the panels of Masterfully Made designer series paper to the slightly larger layers of Basic White card.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

These panels were then glued in place on the Pretty Peacock card base. I then used a Bone Folder to fold and burnish the card base.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

I stamp a flower from the Textured Floral stamp set in Fresh Freesia ink onto the remaining panel of Basic White card and added leaves in Lemon Lime Twist ink. The panel was then adhered to the remaining space on the card base.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

The long strip of Lost Lagoon was then folded around the closed card. I took care to keep it loose enough to slide up and down. I glued the overlapping ends together in the front and snipped off the excess card.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

I punched a circle from the 2¼” square of Basic White card using the 2¼” Punch.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

The large flower from the Textured Floral stamp set was stamped in 2^nd generation Berry Burst ink. I added leaves in stamped off Lemon Lime Twist ink. The sentiment was added over the flower in Pretty Peacock ink.

www.crafty-rootes.co.uk – The Masterfully Made designer series paper and Textured Floral stamp set used to make an accordion fold card for the Stamping With Friends Blog Hop

Two Dimensionals were added to the centre of the Lost lagoon belly band and the stamped circle added.

Love this fun fold.

Please hop on to share the inspiration provided by my stamping friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

The Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp by Stampin' Up! used to make a pretty Ladybird themed card for the Ink. Stamp. Share Blog Hop

Bright Ladybird card for the Ink. Stamp. Share Blog Hop

Posted on June 17, 2023June 9, 2023 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share Blog Hop where we are sharing projects inspired by a sketch. I have used the Hello Ladybug stamp set and the Bright & Beautiful dsp to make my bright ladybird card.

Colours used in this card are:

To recreate the bright ladybird card, you will need:

Azure Afternoon card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded upper left corner
Lemon Lime Twist – 5½” by 3¾” – Rounded upper left corner
Basic White – 5⅜” by 3⅝” – Rounded upper left corner
Bright & Beautiful dsp – 5⅜” by ⅜” x 5
Basic White card – 5½” by 3¾” – for the inside – Rounded upper left corner
Scrap Basic White & Basic Black

Using Multipurpose Liquid Adhesive, I glued the strips of Bright & Beautiful dsp to the smaller panel of Basic White card.

www.crafty-rootes.co.uk – A pretty Ladybird themed card made using the Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp for the Ink. Stamp. Share Blog Hop

I added dots in Bubble Bath ink either side of the dsp. The panel was then glued to the Lemon Lime Twist layer and then to the Azure Afternoon card base.

www.crafty-rootes.co.uk – A pretty Ladybird themed card made using the Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp for the Ink. Stamp. Share Blog Hop

The large leaf from the Hello Ladybug stamp set was stamped on scrap Basic White card in Lemon Lime Twist ink. I used a pair of Scissors to cut out the leaf and added it to the card front on Dimensionals.

www.crafty-rootes.co.uk – A pretty Ladybird themed card made using the Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp for the Ink. Stamp. Share Blog Hop

The ladybird body was punched from scrap Basic Black card.

www.crafty-rootes.co.uk – A pretty Ladybird themed card made using the Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp for the Ink. Stamp. Share Blog Hop

I stamped the wings in Azure Afternoon ink onto scrap Basic White card, punched them out, curved the wings with a Bone Folder and added them to the ladybird body with a Mini Glue Dot. I then glued it to the large leaf.

www.crafty-rootes.co.uk – A pretty Ladybird themed card made using the Ladybug stamp set, Ladybug Builder Punch and Bright & Beautiful dsp for the Ink. Stamp. Share Blog Hop

The sentiment was stamped in Azure Afternoon ink and a trio of Pastel Sequins completed the card.

Please hop on to share the inspiration provided by my crafty friends.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A trio of fun birthday/celebration cards made for my June 2023 classes using the Beautiful Balloons stamp set and dies by Stampin' Up!

Beautiful Balloons Classes

Posted on June 16, 2023June 9, 2023 by Mo Rootes

Today I am sharing the cards I designed for my classes this month using the Beautiful Balloons stamp set and Beautiful Balloons Dies.

Colours used in these projects are:

Balloon Gate Fold Card

Bubble Bath card base – 8¼” by 5⅞” – scored at 2 1/16” on either end
Orchid Oasis 5” & 3” x 2
Basic White – 4⅞” by 2⅞”
Basic White – 5½” by 3¾” – inside
Scrap Basic White & Lemon Lolly

Using the smaller balloon image, we stamped in Bubble Bath in in the upper left and lower right corners of the Bubble Bath card base.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

We used the infill, starry balloon image to stamp a background in Orchid Oasis ink all over the smaller panel of Basic White card. This panel was then adhered to the Orchid Oasis layer.

A selection of balloons were stamped onto scrap Basic White card in in Bubble Bath, Lemon Lolly and Orchid Oasis inks. They were die cut using the Beautiful Balloons dies. We also die cut the ribbon streamer in Lemon Lolly ink.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

We placed the balloons onto the stamped panel and stamped ‘strings’ under a couple of the balloons. The balloons were then added to the panel with liquid glue or Dimensionals.

The decorated panel was then added to the left side of the Bubble Bath card front.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

The sentiment was stamped in Lemon Lolly ink onto Basic White card, trimmed down and added to the card front.

Balloon & Bunting Card

Orchid Oasis card base – 8¼” by 5⅞” – scored at 4⅛”
Bubble Bath – 4⅞” by 3”
Bubble Bath – 5” by 2⅞”
Basic White 5½” by 3¾”
Scrap Basic White & Lemon Lolly

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

Using the long streamer image, we stamped down the length of the small panel of Basic White card using Bubble Bath, Lemon Lolly and Orchid Oasis inks.

The stamped panel was then glued to the Orchid Oasis layer and mounted onto the Orchid Oasis card base on Dimensionals.

The large balloon was stamped in Lemon Lolly ink onto scrap Basic White card.

Confetti was stamped onto the balloon in Orchid Oasis ink and the balloon was die cut out. It was added to the card front on Dimensionals. A White Baker’s Twine bow was added to the bottom of the balloon with a Mini Glue Dot.

The sentiment was stamped in Orchid Oasis ink onto scrap Lemon Lolly card. This was trimmed down and added to the card front.

Mini Balloons card

Lemon Lolly card base – 8¼” by 5⅞” – scored at 4⅛”
Orchid Oasis – 5⅞” by 2¾”
Basic White – 5⅞” by 2½”
Basic White – 4⅛” by 1”
Basic White – 5½” by 3¾”

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

The smallest balloon was stamped randomly onto the long thin panel of Basic White card in Bubble Bath ink.

We then stamped the image again in Lemon Lolly ink and finally in Orchid Oasis ink. We made sure to overlap some of the images. The stamped panel was then glued to the Orchid Oasis layer.

The panel was added to the card front on Dimensionals.

The sentiment was stamped in Orchid Oasis ink onto the strip of Basic White card. This was added to the card front with Dimensionals on either end.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and dies used to make a trio of fun birthday/celebration cards for my June 2023 classes

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A rainbow card for the Pride Blog Hop using the Beautiful Balloons stamp set and Dies by Stampin' Up!

Rainbow Balloons for the Pride Blog Hop

Posted on June 14, 2023June 3, 2023 by Mo Rootes

Hello and welcome to the Pride Blog Hop where we are demonstrating support for the LGBTQ+ community my making projects inspired by the rainbow.

Colours used in this project are:

To recreate the rainbow balloon card, you will need:

Parakeet Party card base – 8¼” by 5⅞” – scored at 4⅛” – rounded upper right corner
Blueberry Bushel card – 5⅝” by 3⅞” – rounded upper right corner
Basic White card – 5½” by 3¾” x 2 – rounded upper right corner
Scrap Basic White card

Using the medium sized balloon from the Beautiful Balloons stamp set, I stamped in Lemon Lolly, Sweet Sorbet, Calypso Coral, Parakeet Party, Blueberry Bushel and Highland Heather inks.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and Dies by Stampin’ Up! used to make a rainbow card for the Pride Blog Hop

These balloons were then die cut using the Beautiful Balloons Dies.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and Dies by Stampin’ Up! used to make a rainbow card for the Pride Blog Hop

The balloons were then added to one of the 5½” by 3¾” panels of Basic White card, some with Multipurpose Liquid Adhesive and others with Dimensionals.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and Dies by Stampin’ Up! used to make a rainbow card for the Pride Blog Hop

This panel was then glued to the Blueberry Bushel layer and then to the Parakeet Party card base using liquid glue.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and Dies by Stampin’ Up! used to make a rainbow card for the Pride Blog Hop

The sentiment was stamped in Blueberry Bushel ink onto the card front.

www.crafty-rootes.co.uk – The Beautiful Balloons stamp set and Dies by Stampin’ Up! used to make a rainbow card for the Pride Blog Hop

A trio of Tinsel Gems completed the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty stripy milkshake themed card made using the Share a Milkshake stamp set and dies by Stampin' Up!

Stripy Milkshake card

Posted on June 13, 2023June 3, 2023 by Mo Rootes

I have been playing with the Share a Milkshake stamp set and dies to make a pretty card for a friend.

Colours used in this card are:

To recreate the stripy milkshake card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Lost lagoon card – 5⅞” by 2½”
Basic White card – 5⅞” by 1⅞”
Pebbled Path card – 4½” by 3”
Basic White card – 3¾” by 2”
Pebbled Path card – 3” by ¼”
Scrap Basic White and Silver Foil

Taking the long thin pot from the Earthen Textures stamp set and stamped it sideways down the 5⅞” by 1⅞” panel of Basic White card in full strength and 2^nd generation Leon Lolly ink to make this really cool texture. I added stripes using the long twiggy stem from one of the stamps from the same stamp set using Pebbled Path ink. I saw this technique in a Youtube video by fellow demonstrator Sarine Zijderveld.

Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

Using the Basic Borders Dies, I die cut a decorated edge into the 5⅞” by 2½” panel of Lost Lagoon card. I stripy piece was then glued to the Lost Lagoon panel before being added to the Thick Basic White card base using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

I stamped the milkshake glass onto scrap Basic White card in Lost Lagoon ink and added the solid image in 2^nd generation (stamped off) Lost Lagoon. The ice cream scoops were then stamped in Lemon Lolly and Daffodil Delight inks. All of these images were then die cut using the Share a Milkshake Dies.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

Using the Countryside Corner Dies I cut 2 labels from the Pebbled Path and Basic White and adhered them together using the liquid glue. The label was added to the card front on Dimensionals.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

I then glued the die cut pieces to the die cut labels and added a spoon die cut from scrap Silver Foil card.

www.crafty-rootes.co.uk – The Share a Milkshake stamp set and dies by Stampin’ Up! used to make a pretty stripy milkshake themed card

The sentiment, from the Sending Smiles stamp set was stamped in Versamark ink onto the thin strip of Pebbled Path card, covered with White Embossing Powder and heat set. I trimmed it down with Scissors and added it to the card front.

A trio of Glossy Dots completed the card.

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A card made for a team training swap and based on a sketch using the It's a Science stamp set and Masterfully Made dsp by Stampin' Up

It’s A Science Team Training Swap card

Posted on June 11, 2023June 3, 2023 by Mo Rootes

Today I am sharing the swap cards made for our recent team training event. We were asked to make 6 identical cards based on a sketch provided by our lovely team leader – Mikaela Titheridge. I used the microscope from the It’s a Science stamp set and the gorgeous Masterfully Made designer Series Paper to make my card.

Colours used to make this card;

To recreate the microscope card, you will need:

Thick Basic White card base – 8¼” by 5⅞” – scored at 4⅛”
Lemon Lime Twist card – 4¼” by 3⅞”
Masterfully Made dsp – 5¼” by 3⅜”
Basic White card – 2½” by 2½”
Lost Lagoon card – 2¾” by ½”

Using Multipurpose Liquid Adhesive, I glued the Lemon Lime Twist card to the front of the Thick Basic White card bas.

www.crafty-rootes.co.uk – It’s a Science stamp set by Stampin’ Up! used with the Masterfully Made dsp to make a card for a team training swap card

The panel of Masterfully Made dsp was then added overtop using the same liquid glue.

www.crafty-rootes.co.uk – It’s a Science stamp set by Stampin’ Up! used with the Masterfully Made dsp to make a card for a team training swap card

I stamped the microscope image in Pretty Peacock ink onto the square of Basic White card and coloured it in using Lemon, Lime Twist, Lost Lagoon and Pretty Peacock Blends Pens. The panel was then mounted onto the card front on Dimensionals.

www.crafty-rootes.co.uk – It’s a Science stamp set by Stampin’ Up! used with the Masterfully Made dsp to make a card for a team training swap card

A sentiment from the Textured Floral stamp set was then stamped onto the strip of Lost Lagoon card in Pretty Peacock ink. This was added to the card front with a Dimensional on the right and glue on the left.

www.crafty-rootes.co.uk – It’s a Science stamp set by Stampin’ Up! used with the Masterfully Made dsp to make a card for a team training swap card

A trio of Tinsel Gems completed the card. I hope you like it.

www.crafty-rootes.co.uk – It’s a Science stamp set by Stampin’ Up! used with the Masterfully Made dsp to make a card for a team training swap card

Order goodies/Join My Team

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge using the Textured Floral stamp set and dies by Stampin' Up!

Red Textured Floral card for the Stamping Inkspirations Blog Hop

Posted on June 10, 2023June 11, 2023 by Mo Rootes

Hello and welcome to the Stamping Inkspirations Blog Hop where we are sharing projects inspired by a tic tac toe board. I have chosen to use the Textured Floral stamp set and the bottom line – red – circle – twine.

Colours used in this card are:

Basic White

Sweet Sorbet

Basic Black

To recreate the red textured floral card, you will need:

Sweet Sorbet card base – 8¼” by 5⅞” – scored at 4⅛”
Sweet Sorbert card – 5½” by 3¾”
Basic White card – 3½” by 3½”
Basic White card – 5½” by 3¾” – for the inside
Scrap Basic White card

Using the Twisted Rope Embossing Folder, I embossed the 5½” by 3¾” panel of Sweet Sorbet and wrapped the Black Twine around twice before adding the panel to the Sweet Sorbet card base.

www.crafty-rootes.co.uk – The Textured Floral stamp set used to make a red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge

I die cut the largest stitched circle from the Stylish Shapes Dies from the square of Basic White card.

www.crafty-rootes.co.uk – The Textured Floral stamp set used to make a red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge

The large flower and medium sized flower, from the Textured Floral stamp set were then stamped in Sweet Sorbet ink onto scrap Basic White card, these were die cut using the co-ordinating Textured Floral Dies.

www.crafty-rootes.co.uk – The Textured Floral stamp set used to make a red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge

The group of leaves were then stamped in Memento Tuxedo Black ink and die cut using the same dies. The flowers and leaves were then added, using Multipurpose Liquid Adhesive, t the stitched circle. The circle was then mounted onto the card base using Dimensionals.

www.crafty-rootes.co.uk – The Textured Floral stamp set used to make a red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge

The sentiment, from the It’s a Science stamp set, was stamped in Memento Tuxedo Black ink onto scrap Basic White card. I trimmed it out using Scissors and added it to the card front with liquid glue.

www.crafty-rootes.co.uk – The Textured Floral stamp set used to make a red textured flower card for the Stamping Inkspirations Tic Tac Toe Blog Hop challenge

A black twine bow and trio of Classic Matte Dots completed the card.

Please hop on to share the inspiration provided by my stamping friends.