A whale themed thank you card for the Ink. Stamp. Share. masculine card blog hop using Stampin' Up! product

Male Whale card for the Ink. Stamp. Share. Blog Hop

Posted on March 27, 2021March 26, 2021 by Mo Rootes

Hello and welcome to the Ink. Stamp. Share. Blog Hop where we are sharing ‘male cards’, I have made a male whale card using the Whale Done stamp set.

Colours used in this project are:

To recreate the Male Whale card, you will need:

Balmy Bay card base – 8¼” by 5⅞” scored at 4⅛”
Basic White – 5⅝” by 3⅞” x 2 – one for the inside
Basic White – 5¼” by 3½”
Pacific Point – 4½” by 3”
Misty Moonlight – 4½” by 3¼”
So Saffron – 4½” by 3”
Balmy Blue – 4½” by 3”
Scrap Basic White

Taking the smaller Basic White panel, I added Balmy Blue ink using a Blending Brush.

www.crafty-rootes.co.uk – A cute male themed card using the While done stamp set and made for the Ink. Stamp. Share. Blog Hop

I inked up the ‘seaweed’ image from the Whale Done stamp set using Pretty Peacock on the bottom and Just Jade ink I stamped down on the blended area. I stamped this multiple times in 1^st, 2^nd and 3^rd generation ink and at different levels.

The shoals of fish were added using So Saffron ink. The panel was then added onto one of the large Basic White panels using Multipurpose Liquid Adhesive – roughly in the centre

www.crafty-rootes.co.uk – A cute male themed card using the While done stamp set and made for the Ink. Stamp. Share. Blog Hop

I took the four panels of card stock measuring 4½” by 3” and cut them into thin strips, wider at one end than the other. Taking the strips, I added them to the 5¼” by 3½” layer of Basic White using Multipurpose Liquid Adhesive leaving a small strip of white visible between the strips. I trimmed off any excess when the whole panel was covered.

Using the Stitched So Sweetly dies and my Stampin’ Cut & Emboss Machine I cut a scalloped rectangle from the centre. I cut the largest scalloped rectangle from the same die set from the panel of Misty Moonlight and used my Paper Trimmer to cut out the centre. This was added to the panel with liquid glue.

www.crafty-rootes.co.uk – A cute male themed card using the While done stamp set and made for the Ink. Stamp. Share. Blog Hop

The die cut panel was then adhered, using Dimensionals over the stamped panel leaving a small white border. The panel was then added to the Balmy Blue card base using the liquid glue.

www.crafty-rootes.co.uk – A cute male themed card using the While done stamp set and made for the Ink. Stamp. Share. Blog Hop

I inked up the Whale image using Balmy Blue ink then added Misty Moonlight to the top of the whale using the ink pad. This was stamped onto scrap Basic White card and punched out using the Whale Builder Punch. I added Dimensionals to the body and liquid glue to the head and added it to the card front. I added Clear Wink of Stella to the whale to give him a watery look.

www.crafty-rootes.co.uk – A cute male themed card using the While done stamp set and made for the Ink. Stamp. Share. Blog Hop

The sentiment from the Art Gallery stamp set was stamped on scrap Basic White card in Misty Moonlight ink before being added with liquid glue to the card front.

Please hop on to see what inspiration Karen Egan has to share today.

Roll Call

Order goodies/Join My Team

If you don’t have a Stampin’ Up! Demonstrator I would love to be yours! If you don’t have a catalogue and live in the UK please let me know and I will be delighted to send you one. To order any supplies click on the “shop online” button at the top of the page. Alternatively, contact me and I would be happy to place an order for you. To join my team either click on the link above or click on the contact me button above and I will contact you with more information.

GDPR

Thanks for visiting my blog today, I love to read what you think of my projects so please do let me know. In line with new Data Protection Legislation (GDPR), by commenting you do so in the knowledge that your name & comment are visible to all who visit this blog and you thereby consent to the use of that personal information for that specific purpose. Please stop by again soon.

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A stunning, shimmery pearl pink seashell card made using Stampin' Up! products

Pearl Pink Shells

Posted on March 26, 2021March 18, 2021 by Mo Rootes

Today I am sharing a gorgeous pearl pink shells thank you card made using the Seashells 3D Embossing Folder and the Seaside Seashells Dies

Colours used in this project are:

Gray Granite

Petal Pink

Basic White

To recreate the pearl pink shells card, you will need:

Gray Granite card base – 8¼” by 5⅞” – scored at 4⅛”
Gray Granite – 5¾” by 4”
Petal Pink – 5⅞” by 4⅛”
Basic White – 5⅜” by 3⅝”
Scrap Basic White

This is such a simple card to make. I started by filling a Stampin’ Spritzer bottle with 70% Isopropyl Alcohol and added a pea sized blob of Frost White Shimmer Paint. After shaking it well I sprayed the Petal Pink card layer all over and set it aside to dry. The shimmer is stunning.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

When the Petal Pink panel was dry. I ran it through the Stampin’ Cut & Emboss Machine using the Seaside Seashell dies.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

The die cut piece was then positioned in the Seashells 3D Embossing Folder and run through the Stampin’ Up! Cut & Emboss Machine again. The texture is amazing.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I added the embossed shimmery die cut to the panel of Gray Granite card using Multipurpose Liquid Adhesive. The panel was then added to the Gray Granite card base with Dimensionals.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I stamped the sentiment from the Sweet Strawberry stamp set in Gray Granite ink onto scrap Basic White card. It was trimmed out using scissors and added to the card front with the liquid glue.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

I added a bow using the Snail Mail Twine and a trio of Elegant Faceted Dots to complete the card.

www.crafty-rootes.co.uk -A stunning pearl pink shell card made using the Seashell embossing folder and the Seaside Seashells dies

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A beautiful birth card featuring a gorgeous purple butterfly and made using Stampin; Up! products

Purple Butterfly card

Posted on March 23, 2021March 17, 2021 by Mo Rootes

Here is a sweet brilliant purple butterfly card made using the Butterfly Brilliance stamp set and Brilliant Wings dies and some emboss resist ink blending.

Colours used in this project are:

To recreate this card, you will need:

Pool Party card Base – 8¼” by 5⅞”
Basic White – 5⅞” by 2⅜”
Basic White – 5⅜” by 3⅝” – for the inside
Highland Heather – 5⅞” by ½” x 2
Scrap Basic White

Using the Brilliant Wings dies I cut a number of detailed butterflies from Basic White card stock.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

These were randomly adhered with repositionable glue to the strip of Basic White card. I scribbled Purple Posy ink onto a D Block and used a Blending Brush to pick up the ink and blend the ink onto the panel over the butterflies. The butterflies were then removed. I love the soft effect this gives.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

I die cut the scalloped border from the Be Mine Dies, cut from the 2 strips of Highland Heather card. These were then adhered to the inked panel using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

I used some of the Snail Mail Twine to wrap around the panel and tied a bow. The panel was added to the Pool Party card base using Dimensionals. The sentiment was stamped in Gorgeous Grape ink onto the Pool Party card base.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

Using Memento Tuxedo Black ink I stamped the large butterfly on scrap Basic Black ink and using the Stampin’ Cut & Emboss Machine and the Brilliant Wings Dies, cut it out.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

I used the Purple Posy and Pool Party Blends Markers to colour in the butterfly. It was added to the card front using Multipurpose Liquid Adhesive.

www.crafty-rootes.co.uk – A beautiful purple butterfly card made using the Butterfly Brilliance stamp et and Brilliant Wings dies

I added a trio of Pastel Pearls and some Clear Wink of Stella on the butterfly. Gorgeous, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A gorgeous water colour Hydrangea bloom featuring the smooched ink technique and the Hydrangea Haven stamp set and Hydrangea Dies by Stampin' Up!

Smooched Hydrangea

Posted on March 21, 2021March 15, 2021 by Mo Rootes

A sweet card featuring a gorgeous smooched Hydrangea made with the Hydrangea Haven stamp set and Hydrangea Dies and some watercolour ink smooching. Love a bit of smooching.

Colours used in this project are:

To recreate the smooched Hydrangea card, you will need:

Soft Sea Foam card base – 8¼” by 5⅞” – scored at 4⅛” – Rounded lower right corner
Flirty Flamingo – 5¾” by 3¼” – Rounded lower right corner
Fluid 100 – 5” by 5½” – Cut down to 5” by 3” after inking – Rounded lower right corner -the remnant used to die cut the individual blooms
Basic White – 5½” by 3¾” Rounded lower right corner
Scrap Fluid 100 & Soft Sea Foam

I began by taking my large F Block and pressing the Blushing Bride ink pad onto it. I then dabbed Highland Heather ink in random spots on the block. I then used a Spritzer to spray the inked bloc with water. I laid the panel of Fluid 100 water color paper on top of the wet ink and allowed it to soak into the paper. This was then set aside to dry.

www.crafty-rootes.co.uk – A smooched Hydrangea card made using the Hydrangea Haven stamp set

I mounted the Hydrangea image onto my Stampartus plate inked it up with Versamark ink, then inked it again with Memento Tuxedo Black ink before stamping it down onto scrap Fluid 100 paper. I used the stamparatus to do this as it can be difficult to get a good, clear stamped image on textured water colour paper and doing it this way would allow me to re-stamp if I needed too. I then covered the stamped image with Clear Embossing Powder and Heat set it using my Heat Tool. This image was then die cut using the Hydrangea Dies. I cut off the bloom using scissors.

www.crafty-rootes.co.uk – A smooched Hydrangea card made using the Hydrangea Haven stamp set

I repeated the same process to stamp the image on the dried water coloured panel. The die cut stalk and leaves were then glued to the panel over top of the stamped image.

www.crafty-rootes.co.uk – A smooched Hydrangea card made using the Hydrangea Haven stamp set

I die cut the strip of flower blossoms a number of times from the left-over inked water coloured card, used a bone folder to curl the petals. The flowers were then added to the head of the hydrangea with Mini Glue Dots.

www.crafty-rootes.co.uk – A smooched Hydrangea card made using the Hydrangea Haven stamp set

The decorated panel was added to the layer of Flirty Flamingo with Multipurpose Liquid Adhesive. I then wrapped some of the lovely Blushing Bride Snail Mail Twine around the panel and tied a bow. The panel was then added to the Soft Sea Foam card base on Dimensionals.

www.crafty-rootes.co.uk – A smooched Hydrangea card made using the Hydrangea Haven stamp set

The sentiment from the same stamp set was stamped in Old Olive ink, die cut using the sweet tag from the Hydrangea dies. The tag was added to the card front with a Mini Glue Dot. I used the Flirty Flamingo Blends Markers to colour some Basic Pearls and added them to the centre of each small petal cluster to complete the card.

Such a soft and pretty card, I hope you like it.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Gorgeous butterfly themed cards made using the Butterfly Bijou dsp by Stampin' Up! for a class in the mail

Butterfly Bijou Class in the Mail

Posted on March 19, 2021March 14, 2021 by Mo Rootes

Today I am sharing the projects I designed for my April Cass in the Mail using the gorgeous Butterfly Bijou designer Series Paper (dsp). This paper is stunning, I am so sad that it is only available until May or while stocks last.

Each pack contained all the card stock needed to make each card including the pre embossed panel for the two butterfly card, 6 sheets of the Butterfly Bijou dsp – I die cut the butterflies from one of the sheets for those who don’t have the Brilliant Wings dies and I cut the dsp panels for those without a paper trimmer. A strip of Oval Rounds, a gold hoop and a little treat. The ladies provided their own sentiments.

Colours used in this project are:

To recreate the Pink Butterfly card, you will need:

Bermuda Bay card base – 8¼” by 5⅞” – scored at 4⅛”
Misty Moonlight layer – 4⅛” by 3⅛”
Basic White – 5⅜” by 3⅝” – for the inside
Butterfly Bijou dsp – 4” by 3”
Basic White – 4⅛” by ½”

www.crafty-rootes.com – Projects made for the Butterfly Bijou Class in the Mail, March 2021

The piece of dsp was glued to the Misty Moonlight panel using Multipurpose Liquid Adhesive and added to the Bermuda Bay card front on Dimensionals.

A butterfly was added using the liquid glue and the card was decorated with the lovely Oval Rounds.

To recreate the Two Butterfly card, you will need:

Misty Moonlight card base – 8¼” by 5⅞” – scored at 4⅛”
Butterfly Bijou dsp – 5⅞” by 1”
Butterfly Bijou dsp 5⅜ by 3⅜”
Basic White layer – 5⅛” by 3⅛” – embossed
Basic White 5⅜ by 3⅜” – for the inside
Die cut Butterflies x 2
Gold Hoop

www.crafty-rootes.com – Projects made for the Butterfly Bijou Class in the Mail, March 2021

The long strip of dsp was glued to the Misty Moonlight card base using the liquid glue

We added the embossed panel to the larger panel of dsp using the same glue. The panel was embossed using the Tasteful Textiles Embossing Folder. The whole piece was then mounted on the Misty Moonlight card base using Dimensionals.

We added the Gold Hoop to the card front using liquid adhesive and the butterflies were added on Dimensionals. The card was decorated with the Oval Rounds

To recreate the Fun Fold Butterfly card, you will:

Calypso Coral card base – 8¼” by 5⅞” – scored at 4⅛” & 2”
Misty Moonlight – 5 ½” by 3 ¾”
Basic White – 5⅜“ by 3⅝” x 2
Strips of Butterfly Bijou dsp – 2 ½” long, various widths
¼” Strip of Butterfly Bijou

www.crafty-rootes.com – Projects made for the Butterfly Bijou Class in the Mail, March 2021

We folded and burnished the card base, the centre panel in half then the other score line back on itself – this makes a Z shape.

The DSP strips were glued to one of the Basic White panels – I alternated butterfly patterns with non-butterfly patterns.

The decorated panel was added to the Misty Moonlight layer and then t the card front, adhering only the left side.

A butterfly was added with liquid glue and decorated with the Oval Rounds.

www.crafty-rootes.com – Projects made for the Butterfly Bijou Class in the Mail, March 2021

Such pretty cards, I hope you like them.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty Easter Wreath featuring sweet Easter eggs and made using the Arrange A Wreath stamp set and Wreath Builder Dies

Easter Wreath for the Crafty Collaborations Easter Blog Hop

Posted on March 18, 2021March 18, 2021 by Mo Rootes

Welcome to the Crafty Collaborations Easter Blog Hop. I love Spring, I think it is my favourite season of the year especially as my birthday is in Spring, I was actually born on Easter Monday. Easter is earlier in April this year and I have chosen to use the Arrange A Wreath Stamp set and Wreath Builder Dies to make a sweet Easter Wreath card.

Colours used in this project are:

To recreate the Easter Wreath card:

Granny Apple Green card base – 8¼” by 5⅞” scored at 4⅛” – rounded upper left corner
Highland Heather card base – 5⅜” by 3⅝” – rounded upper left corner
Basic White – 5⅛” by 3⅜” – rounded upper left corner
Basic White – 5⅜” by 3⅝” – rounded upper left corner – for the inside
Granny Apple Green – 4” by 4”
Vellum – 4” by 4”
Scrap Basic White

Using the Stampin’ Cut & Emboss Machine I die cut 2 wreaths using the Wreath Builder Dies, one from the square of Granny Apple Green card and the other from the square of Vellum card stock. These were added to the smaller Basic White panel using dots of Multipurpose Liquid Adhesive.

www.crafty-rootes.com – An adorable Easter Wreath card made for the Crafty Collaborations Easter Blog Hop

The whole panel was then added to the Highland Heather layer with the same liquid glue and then to the Granny Apple Green card base.

www.crafty-rootes.com – An adorable Easter Wreath card made for the Crafty Collaborations Easter Blog Hop

I stamped the sweet eggs from the Arrange A Wreath stamp set on scrap Basic White in So Saffron ink, Highland Heather ink, Flirty Flamingo ink and Pool Party ink. These were then cut out using the same dies.

www.crafty-rootes.com – An adorable Easter Wreath card made for the Crafty Collaborations Easter Blog Hop

The eggs were added to the wreath with either Mini Glue Dots or Dimensionals.

www.crafty-rootes.com – An adorable Easter Wreath card made for the Crafty Collaborations Easter Blog Hop

The sentiment from the same stamp set was stamped in Highland Heather ink.

www.crafty-rootes.com – An adorable Easter Wreath card made for the Crafty Collaborations Easter Blog Hop

To complete the card, I added Silver Metallic Pearls and a small bow made using the Snail Mail Twine.

Please hop on to see what the other participants have to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

Dandy Dragonfly Garden

Posted on March 16, 2021March 6, 2021 by Mo Rootes

I have been playing with the Dragonfly Garden stamp set and Dandy Garden dsp today and have made some sweet dandy dragonfly garden all occasions card.

Colours used in this project are:

To recreate the Dandy Dragonfly Garden card, you will need:

Misty Moonlight card base – 8¼” by 5⅞” scored at 4⅛”
Basic White card – 5¾” by 4”
Basic White card – 5¾” by 2”
Dandy Garden dsp – 5⅝” by 1⅞”
Basic White card – 4⅞” by 3”
Dandy Garden dsp – 4 ¾” by 2⅞”
Dandy Garden – 5¾” by ⅜”
Scrap of Basic White

Taking the front of the Misty Moonlight card base I folded it in half and back on itself. I added the long thin strip of Basic White card to the panel and glued the strip of Dandy Garden dsp onto the Basic White panel.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

The large piece of Basic White was added to the back panel and decorated it with a ⅜” strip of dsp.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

The remaining panel of Dandy Garden dsp was added with Multipurpose Liquid Adhesive to the remaining Basic White layer. This was then glued to the small front panel using the same liquid glue.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

Using the Tasteful Label dies and the Stampin’ Cut & Emboss Machine I cut out a small label from scrap Basic White card. I stamped the sentiment from the Enjoy the Moment stamp set in Misty Moonlight ink and added to the card front on Dimensionals.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

I punched out a large and small dragonfly using the Dragonfly Punch from one of the sheets of dsp. These were added to the card front on Dimensionals.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

I added a scattering of Artistry Blooms Sequins to complete the card.

www.crafty-rootes.com – A sweet all occasions, fun fold card featuring the dandy dragonfly garden suite by Stampin’ Up!

I love this card, in fact I loved it so much I made more using the same dsp and different coloured card bases.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A gorgeous gold leafed hydrangea made using the Hydrangea Haven Stamp set by Stampin' Up!

Golden Hydrangea for the Kylie Bertucci Demo Blog Hop

Posted on March 15, 2021March 15, 2021 by Mo Rootes

Hello and welcome to my blog. My name is Mo Rootes from Cambridge in the UK and I am thrilled to be taking part in this blog hop with fellow demonstrators, from around the world, who are part of Kylie Bertucci’s demonstrator training program. The theme for the hop is ‘Thank You’ and I am sure you will find lots of inspiration as you hop along with us

You may be starting here or have come from another blog – either way you can find the hop list at the bottom of this post so please hop along with us today.

Colours used in today’s project are:

To recreate the gold leafed hydrangea you will need:

Flirty Flamingo – 8¼” by 5⅞” scored at 4⅛” – rounded upper left and lower right corners
Gold Foil – 5 ½” by 3 ¾” – rounded upper left and lower right corners
Merry Merlot – 5⅜” by 3⅝” – rounded upper left and lower right corners
Very Vanilla – 5⅜” by 3⅝” – rounded upper left and lower right corners for the inside
Scrap Very Vanilla

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

Using the Stamparatus I stamped the gorgeous hydrangea image in Versamark ink onto the panel of Merry Merlot – I did this twice – then covered it in Heat and Stick Powder.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

I set the powder using my Heat Tool before covering the sticky image with Gold Gilding Flakes. I used my fingers and a piece of Stampin’ Sponge to rub in the Gold Gilding Flakes, removing the excess.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

The stamped layer was then added to the Gold Foil Panel using Multipurpose Liquid Adhesive and then to the card front on Dimensionals.

I stamped the sentiment in Merry Merlot ink onto scrap Very Vanilla card and used the small tag from the Hydrangea Dies and the Mini Stampin’ Cut & Emboss Machine to die cut the sentiment out.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

I added the tag to the card front with a Mini Glue Dot and added a bow of twine from the Forever Greenery Ribbon pack.

www.crafty-rootes.com – A delicate golden hydrangea thank you card for the Kylie Bertucci Demo Blog Hop

Such a pretty card. I hope you like it

Please hop on to see what the other demos have to share today.

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used

A beautiful coloured medallion for the Colour Combo Blog Hop using the Treasured Medallion Stamp set by Stampin' Up!

Treasured Medallion for the Colour Combo Blog Hop

Posted on March 14, 2021March 11, 2021 by Mo Rootes

Hello and welcome to the March Colour Combo blog Hop, I hope you enjoyed the project Mickey Moore shared with us today. I have chosen to use the Treasured Medallion stamp set for my card.

Our colours this month are:

Terracotta Tile

Mango Melody

Petal Pink

To recreate the treasured medallion card, you will need:

Petal Pink card base – 5⅞” & 5¾” – scored at 4⅛” on the 5¾” side – rounded lower left corner
Terracotta Tile – 5⅜” by 3⅝” – rounded lower left corner
Basic White – 5¼ ” by 3½ ” – rounded lower left corner
Basic White – 5⅜” by 3⅝” – rounded lower left corner – for the inside

The large medallion image from the Treasured Medallion stamp set was stamped onto the smaller panel of Basic White using Basic Gray ink.

www.crafty-rootes.com – The Treasured Medallion stamp set used for the Colour Combo Blog Hop

I used Terracotta Tile, Mango Melody and Petal Pink Stampin’ Write Markers to colour in the lovely intricate medallion.

www.crafty-rootes.com – The Treasured Medallion stamp set used for the Colour Combo Blog Hop

The sentiment from the same stamp set was stamped in Terracotta Tile ink and the stamped panel attached to the Terracotta Tile layer using Multipurpose Liquid Adhesive.

www.crafty-rootes.com – The Treasured Medallion stamp set used for the Colour Combo Blog Hop

I wrapped a length of Ornate Garden Ribbon around the panel before adding it to the Petal Pink card base using Dimensionals.

www.crafty-rootes.com – The Treasured Medallion stamp set used for the Colour Combo Blog Hop

To complete he card I added a bow and some Elegant Faceted Dots. I hope you like it,

www.crafty-rootes.com – The Treasured Medallion stamp set used for the Colour Combo Blog Hop

Please hop on to see what the lovely Gez Carpenter has to share with us today.

Order goodies/Join My Team

GDPR

Details of the products I used for this project can be found below.

Mo x

Supplies used:

A pretty floral fun fold card for a special birthday made using the Pierced Blooms dies by Stampin' Up!

Hidden, Floating Inner card for the Stampin ‘n’Hop Blog Hop

Posted on March 13, 2021March 11, 2021 by Mo Rootes

Hello and welcome to the Stampin ‘n’ Hop Blog Hop where Our theme is ‘Fun-Folds’. I love a fun fold and decided to try one I have never made before using the Pierced Blooms dies and In Good Taste dsp. This hidden, floating inner card will be for the special birthday of one of my Aunts.

Colours used in this project are:

To recreate the card, you will need:

Basic White card – 5⅞” by 4⅛” x 2
Thick Basic White – 11” by 4” – scored at 2¾” by 6½” & 8¼”
Flirty Flamingo card – 5⅝” by 3⅞” x 3
Basic White – 3 ¾” by 2 ½” x 4
In Good Taste dsp – 5⅜” by 3⅝” x 3
In Good Taste dsp – 3⅝” by 2⅜” x 4
Basic White for labels
Scrap Flirty Flamingo, So Saffron, Highland Heather, Mint Macaron, Night of Navy for the die cut flowers and leaves

Using Multipurpose Liquid Adhesive I added the 3 larger dsp panels to the 3 panels of Flirty Flamingo. These were then glued to the large Basic White layers using the same adhesive.

www.crafty-rootes.com – A beautiful floral fun fold card made for the Stampin ‘n’ Hop Blog Hop using the Pierced Blooms Dies

I used the same glue to add the 4 smaller panels of dsp to the smaller Flirty Flamingo panels. These were then added with the same glue to the longer piece of Basic White, one in each of the panels.

www.crafty-rootes.com – A beautiful floral fun fold card made for the Stampin ‘n’ Hop Blog Hop using the Pierced Blooms Dies

The labels – one large for the front and 4 scalloped rectangles for the inside panels – all cut using the Stitched So Sweetly dies and the Mini Stampin’ Cut & Emboss Machine. The sentiments were then stamped on the labels in Night of Navy ink.

www.crafty-rootes.com – A beautiful floral fun fold card made for the Stampin ‘n’ Hop Blog Hop using the Pierced Blooms Dies

The labels were then adhered with the same liquid glue to the front and inside panels.

www.crafty-rootes.com – A beautiful floral fun fold card made for the Stampin ‘n’ Hop Blog Hop using the Pierced Blooms Dies

I die cut a selection of flowers and leaves using the In Bloom dies and scraps of Flirty Flamingo, So Saffron, Highland Heather, Mint Macaron and Night of Navy card stock.